no volume groups found
Hello,
I use 2.4.9 with debian unstable and lvm version 0.9.1_beta6. I don´t use devfs and compiled lvm into the kernel.
I created a vg nameed vg01 containing hda2,hdb1,hdd1,sdb1 and sdc1. Then I created some lv´s and made a mkfs.xfs.
I could do a "vgscan -v && vgchange -a y" and mount my lv´s.
After a reboot, /etc/rcS.d/S25lvm couldn´t find any vg´s. So I ran the script manually and it works.
I had some other problems that need me to reboot and my PC crashed several times. Now, I can´t even run the script manually. I always get this:
home:# vgscan -v
vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d" vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group
home:# vgchange -a y
vgchange -- no volume groups found
home:# vgdisplay
vgdisplay -- no volume groups found
Then I did "man vgcfgrestore" and tryed
home:# vgcfgrestore -n vg01 -l
vgcfgrestore -- ERROR: different structure size stored in "/etc/lvmconf/vg01.conf" than expected in file vg_cfgrestore.c [line 137]
vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group "vg01"
and:
home:# vgcfgrestore -f /etc/lvmconf/vg01.conf.1.old -n vg01 /dev/sdb1 vgcfgrestore -- ERROR: different structure size stored in "/etc/lvmconf/vg01.conf.1.old" than expected in file vg_cfgrestore.c [line 137]
vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group "vg01"
What "PhysicalVolumePath" should I use with it?
Then I looked in the mail-archive and did a:
home:/home/fzzgrr# vgcfgrestore -v -d -n vg01 /dev/hda2 <1> vg_check_name -- CALLED with VG: vg01 <22> lvm_check_chars -- CALLED with name: "vg01" <22> lvm_check_chars -- LEAVING with ret: 0 <1> vg_check_name -- LEAVING with ret: 0 <1> pv_check_name -- CALLED with "/dev/hda2" <22> lvm_check_chars -- CALLED with name: "/dev/hda2" <22> lvm_check_chars -- LEAVING with ret: 0 <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <333> lvm_check_partitioned_dev -- LEAVING with ret: TRUE <22> lvm_check_dev -- LEAVING with ret: 1 <1> pv_check_name -- LEAVING with ret: 0 <1> vg_check_active -- CALLED with VG: vg01 <22> vg_check_name -- CALLED with VG: vg01 <333> lvm_check_chars -- CALLED with name: "vg01" <333> lvm_check_chars -- LEAVING with ret: 0 <22> vg_check_name -- LEAVING with ret: 0 <22> vg_status -- CALLED with VG: vg01 <333> vg_check_name -- CALLED with VG: vg01 <4444> lvm_check_chars -- CALLED with name: "vg01" <4444> lvm_check_chars -- LEAVING with ret: 0 <333> vg_check_name -- LEAVING with ret: 0 <22> vg_status -- LEAVING with ret: -6 <1> vg_check_active -- LEAVING with ret: -6 <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 vgcfgrestore -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 <1> lvm_dont_interrupt -- CALLED <1> lvm_dont_interrupt -- LEAVING vgcfgrestore -- restoring volume group "vg01" from "/etc/lvmconf/vg01.conf" <1> vg_cfgrestore -- CALLED <22> vg_check_name -- CALLED with VG: vg01 <333> lvm_check_chars -- CALLED with name: "vg01" <333> lvm_check_chars -- LEAVING with ret: 0 <22> vg_check_name -- LEAVING with ret: 0 vgcfgrestore -- checking existence of "/etc/lvmconf/vg01.conf" vgcfgrestore -- reading volume group data for "vg01" from "/etc/lvmconf/vg01.conf" <22> vg_check_consistency -- CALLED <333> vg_check_name -- CALLED with VG: vg01 <4444> lvm_check_chars -- CALLED with name: "vg01" <4444> lvm_check_chars -- LEAVING with ret: 0 <333> vg_check_name -- LEAVING with ret: 0 <22> vg_check_consistency -- LEAVING with ret: 0 vgcfgrestore -- reading physical volume data for "vg01" from "/etc/lvmconf/vg01.conf" vgcfgrestore -- ERROR: different structure size stored in "/etc/lvmconf/vg01.conf" than expected in file vg_cfgrestore.c [line 137] <1> vg_cfgrestore -- LEAVING with ret: -328 <1> lvm_error -- CALLED with: -328 <1> lvm_error -- LEAVING with: "vg_cfgrestore(): read" vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group "vg01"
<1> lvm_unlock -- CALLED
<1> lvm_unlock -- LEAVING with ret: 0
So, what else can I do?
I don´t want lose my data!
:(
Any hints?
Thanks.
Uli
Signature · 1 line
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5
THATS WHY IT IS CALLED UNSTABLE!!!!!!!!!!!!!!!!!
Quoted 141 lines · --- Ulrich Wiederhold
Hello,
I use 2.4.9 with debian unstable and lvm version 0.9.1_beta6. I don�t
use devfs and compiled lvm into the kernel. I created a vg nameed vg01 containing hda2,hdb1,hdd1,sdb1 and sdc1. Then
I created some lv�s and made a mkfs.xfs.
I could do a "vgscan -v && vgchange -a y" and mount my lv�s.After a reboot,
/etc/rcS.d/S25lvmcouldn�t find any vg�s. So I ran the
script manually and it works.I had some other problems that need me to reboot and my PC crashed several
times. Now, I can�t even run the script manually. I always get this:home:# vgscan -v
vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d" vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume
grouphome:# vgchange -a y
vgchange -- no volume groups foundhome:# vgdisplay
vgdisplay -- no volume groups foundThen I did "man vgcfgrestore" and tryed
home:# vgcfgrestore -n vg01 -l
vgcfgrestore -- ERROR: different structure size
stored in
"/etc/lvmconf/vg01.conf" than expected in filevg_cfgrestore.c[line
137]
vgcfgrestore -- ERROR "vg_cfgrestore(): read"
restoring volume group
"vg01"and:
home:# vgcfgrestore -f/etc/lvmconf/vg01.conf.1.old-n vg01/dev/sdb1
vgcfgrestore -- ERROR: different structure size stored in
"/etc/lvmconf/vg01.conf.1.old" than expected in filevg_cfgrestore.c
[line 137]
vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group
"vg01"What "PhysicalVolumePath" should I use with it?
Then I looked in the mail-archive and did a:
home:/home/fzzgrr# vgcfgrestore -v -d -n vg01 /dev/hda2 <1> vg_check_name -- CALLED with VG: vg01 <22> lvm_check_chars -- CALLED with name: "vg01" <22> lvm_check_chars -- LEAVING with ret: 0 <1> vg_check_name -- LEAVING with ret: 0 <1> pv_check_name -- CALLED with "/dev/hda2" <22> lvm_check_chars -- CALLED with name: "/dev/hda2" <22> lvm_check_chars -- LEAVING with ret: 0 <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <333> lvm_check_partitioned_dev -- LEAVING with ret: TRUE <22> lvm_check_dev -- LEAVING with ret: 1 <1> pv_check_name -- LEAVING with ret: 0 <1> vg_check_active -- CALLED with VG: vg01 <22> vg_check_name -- CALLED with VG: vg01 <333> lvm_check_chars -- CALLED with name: "vg01" <333> lvm_check_chars -- LEAVING with ret: 0 <22> vg_check_name -- LEAVING with ret: 0 <22> vg_status -- CALLED with VG: vg01 <333> vg_check_name -- CALLED with VG: vg01 <4444> lvm_check_chars -- CALLED with name: "vg01" <4444> lvm_check_chars -- LEAVING with ret: 0 <333> vg_check_name -- LEAVING with ret: 0 <22> vg_status -- LEAVING with ret: -6 <1> vg_check_active -- LEAVING with ret: -6 <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 vgcfgrestore -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 <1> lvm_dont_interrupt -- CALLED <1> lvm_dont_interrupt -- LEAVING vgcfgrestore -- restoring volume group "vg01" from "/etc/lvmconf/vg01.conf" <1> vg_cfgrestore -- CALLED <22> vg_check_name -- CALLED with VG: vg01 <333> lvm_check_chars -- CALLED with name: "vg01" <333> lvm_check_chars -- LEAVING with ret: 0 <22> vg_check_name -- LEAVING with ret: 0 vgcfgrestore -- checking existence of "/etc/lvmconf/vg01.conf" vgcfgrestore -- reading volume group data for "vg01" from "/etc/lvmconf/vg01.conf" <22> vg_check_consistency -- CALLED <333> vg_check_name -- CALLED with VG: vg01 <4444> lvm_check_chars -- CALLED with name: "vg01" <4444> lvm_check_chars -- LEAVING with ret: 0 <333> vg_check_name -- LEAVING with ret: 0 <22> vg_check_consistency -- LEAVING with ret: 0 vgcfgrestore -- reading physical volume data for "vg01" from "/etc/lvmconf/vg01.conf" vgcfgrestore -- ERROR: different structure size stored in "/etc/lvmconf/vg01.conf" than expected in file vg_cfgrestore.c [line 137] <1> vg_cfgrestore -- LEAVING with ret: -328 <1> lvm_error -- CALLED with: -328 <1> lvm_error -- LEAVING with: "vg_cfgrestore(): read" vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group "vg01"<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0
Quoted 16 lines
So, what else can I do?
I don�t want lose my data!
:(Any hints?
Thanks.
UliSignature · 7 lines
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5 _______________________________________________ linux-lvm mailing list [email protected] http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at
http://www.sistina.com/lvm/Pages/howto.html
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
Pierre,
It's not proper to yell at people like that. The guy is asking an honest question and you yelling at him will not get him any closer to a solution.
I use debian unstable, but I have upgraded to lvm 1.0.
My suggestion is to use lvm 1.0-rc1. Any other valid suggestions?
Glenn
----- Original Message -----
From: "Pierre Lamb" <[email protected]>
To: <[email protected]>
Sent: Monday, August 20, 2001 1:09 PM
Subject: Re: [linux-lvm] no volume groups found
Quoted 171 lines
THATS WHY IT IS CALLED UNSTABLE!!!!!!!!!!!!!!!!!
Quoted 149 lines · --- Ulrich Wiederhold
Hello,
I use 2.4.9 with debian unstable and lvm version 0.9.1_beta6. I don�t
use devfs and compiled lvm into the kernel. I created a vg nameed vg01 containing hda2,hdb1,hdd1,sdb1 and sdc1. Then
I created some lv�s and made a mkfs.xfs.
I could do a "vgscan -v && vgchange -a y" and mount my lv�s.After a reboot,
/etc/rcS.d/S25lvmcouldn�t find any vg�s. So I ran the
script manually and it works.I had some other problems that need me to reboot and my PC crashed several
times. Now, I can�t even run the script manually. I always get this:home:# vgscan -v
vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d" vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume
grouphome:# vgchange -a y
vgchange -- no volume groups foundhome:# vgdisplay
vgdisplay -- no volume groups foundThen I did "man vgcfgrestore" and tryed
home:# vgcfgrestore -n vg01 -l
vgcfgrestore -- ERROR: different structure size
stored in
"/etc/lvmconf/vg01.conf" than expected in filevg_cfgrestore.c[line
137]
vgcfgrestore -- ERROR "vg_cfgrestore(): read"
restoring volume group
"vg01"and:
home:# vgcfgrestore -f/etc/lvmconf/vg01.conf.1.old-n vg01/dev/sdb1
vgcfgrestore -- ERROR: different structure size stored in
"/etc/lvmconf/vg01.conf.1.old" than expected in filevg_cfgrestore.c
[line 137]
vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group
"vg01"What "PhysicalVolumePath" should I use with it?
Then I looked in the mail-archive and did a:
home:/home/fzzgrr# vgcfgrestore -v -d -n vg01 /dev/hda2 <1> vg_check_name -- CALLED with VG: vg01 <22> lvm_check_chars -- CALLED with name: "vg01" <22> lvm_check_chars -- LEAVING with ret: 0 <1> vg_check_name -- LEAVING with ret: 0 <1> pv_check_name -- CALLED with "/dev/hda2" <22> lvm_check_chars -- CALLED with name: "/dev/hda2" <22> lvm_check_chars -- LEAVING with ret: 0 <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <333> lvm_check_partitioned_dev -- LEAVING with ret: TRUE <22> lvm_check_dev -- LEAVING with ret: 1 <1> pv_check_name -- LEAVING with ret: 0 <1> vg_check_active -- CALLED with VG: vg01 <22> vg_check_name -- CALLED with VG: vg01 <333> lvm_check_chars -- CALLED with name: "vg01" <333> lvm_check_chars -- LEAVING with ret: 0 <22> vg_check_name -- LEAVING with ret: 0 <22> vg_status -- CALLED with VG: vg01 <333> vg_check_name -- CALLED with VG: vg01 <4444> lvm_check_chars -- CALLED with name: "vg01" <4444> lvm_check_chars -- LEAVING with ret: 0 <333> vg_check_name -- LEAVING with ret: 0 <22> vg_status -- LEAVING with ret: -6 <1> vg_check_active -- LEAVING with ret: -6 <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 vgcfgrestore -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 <1> lvm_dont_interrupt -- CALLED <1> lvm_dont_interrupt -- LEAVING vgcfgrestore -- restoring volume group "vg01" from "/etc/lvmconf/vg01.conf" <1> vg_cfgrestore -- CALLED <22> vg_check_name -- CALLED with VG: vg01 <333> lvm_check_chars -- CALLED with name: "vg01" <333> lvm_check_chars -- LEAVING with ret: 0 <22> vg_check_name -- LEAVING with ret: 0 vgcfgrestore -- checking existence of "/etc/lvmconf/vg01.conf" vgcfgrestore -- reading volume group data for "vg01" from "/etc/lvmconf/vg01.conf" <22> vg_check_consistency -- CALLED <333> vg_check_name -- CALLED with VG: vg01 <4444> lvm_check_chars -- CALLED with name: "vg01" <4444> lvm_check_chars -- LEAVING with ret: 0 <333> vg_check_name -- LEAVING with ret: 0 <22> vg_check_consistency -- LEAVING with ret: 0 vgcfgrestore -- reading physical volume data for "vg01" from "/etc/lvmconf/vg01.conf" vgcfgrestore -- ERROR: different structure size stored in "/etc/lvmconf/vg01.conf" than expected in file vg_cfgrestore.c [line 137] <1> vg_cfgrestore -- LEAVING with ret: -328 <1> lvm_error -- CALLED with: -328 <1> lvm_error -- LEAVING with: "vg_cfgrestore(): read" vgcfgrestore -- ERROR "vg_cfgrestore(): read" restoring volume group "vg01"<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0So, what else can I do?
I don�t want lose my data!
:(Any hints?
Thanks.
UliQuoted 8 lines
--
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5
_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO athttp://www.sistina.com/lvm/Pages/howto.html
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html