Athlon doesn't like Athlon optimisation?
I have a computer with a duron 600 which doesn't like current athlon optimised kernels: It runs fairly well with an old 2.4.0-test7 kernel (but I had some unexplained crashes during the last months), but crashes after a few minutes after booting 2.4.9-ac3 or 2.4.7.
If I don't build the kernels for athlon, but for i386 only, the system seems to be stable. (Not tested for more than 20 minutes, but definitely longer than the athlon optimised kernel was able to run)
Does anybody know these symptoms and has an idea what may be wrong? Is it likely to be a broken CPU?
The board is an A7V with the infamous via chipset, but I don't think this looks like the typical via problems, does it?
Jan
Signature · 2 lines
OpenPGP-signierte bzw. -verschlüsselte Mail erwünscht EMail-Key: 1024D/F12DA065 (=> Keyserver oder auf Anfrage)
Quoted 5 lines · Jan Niehusmann
I have a computer with a duron 600 which doesn't like current athlon optimised kernels: It runs fairly well with an old 2.4.0-test7 kernel (but I had some unexplained crashes during the last months), but crashes after a few minutes after booting 2.4.9-ac3 or 2.4.7.
Quoted 7 lines
If I don't build the kernels for athlon, but for i386 only, the system seems to be stable. (Not tested for more than 20 minutes, but definitely longer than the athlon optimised kernel was able to run)
Does anybody know these symptoms and has an idea what may be wrong?
Is it likely to be a broken CPU? The board is an A7V with the infamous via chipset, but I don't think this looks like the typical via problems, does it?Jan
This has apparently been a source of frustration for many an Athlon user, myself included. I can't even get my system to finish the init process before it oopses and locks up on me.
It seems to work somewhat better for some if you set your BIOS to the conservative settings, but that didn't help me. I have an Epox 8KTA3+ (Via KT133A) w/ a 1.4GHz Athlon and 512MB memory. If you can't get it to work that way, just stick with the K6 setting. The point is, your hardware is likely fine (fine being relative, I suppose) If there are other tricks, I'm all ears.
Signature · 3 lines
David Hollister Driversoft Engineering: http://devicedrivers.com Digital Audio Resources: http://digitalaudioresources.org
Richard, the FAQ could use an entry about this and the other VIA problem.
Quoted 4 lines · David Hollister
Quoted 2 lines · Jan Niehusmann
I have a computer with a duron 600 which doesn't like current athlon optimised kernels: It runs fairly well with an old 2.4.0-test7 kernel
...
Quoted 3 lines
Quoted 3 lines
Is it likely to be a broken CPU?
The board is an A7V with the infamous via chipset, but I don't think this looks like the typical via problems, does it?
...
Quoted 2 lines
point is, your hardware is likely fine (fine being relative, I suppose) If there are other tricks, I'm all ears.
There are highly optimized memory copy/clear operations that run twice as fast on the Athlon, thus demanding more from the motherboard and power supply. You have a VIA chipset and most likely have a relatively weak power supply.
Don't go blaming Linux when power supply upgrades sometimes make this problem go away. You could also try one of the recent SiS or ALi chipsets.
I just saw a reference (maybe www.tomshardware.com) to AMD's new chips having trouble on VIA boards -- I'd guess that the Palimino core can push the motherboard too hard without fancy Athlon code.
Quoted 2 lines · Albert D. Cahalan
Richard, the FAQ could use an entry about this and the other VIA problem.
How about sending me a patch to the HTML file? That's less work for me :-)
Regards, Richard.... Permanent: [email protected] Current: [email protected]
Quoted 6 lines · Albert D. Cahalan
Don't go blaming Linux when power supply upgrades sometimes make this problem go away. You could also try one of the recent SiS or ALi chipsets.
I just saw a reference (maybe www.tomshardware.com) to AMD's new chips having trouble on VIA boards -- I'd guess that the Palimino core can push the motherboard too hard without fancy Athlon code.
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply?
Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
-Dan
Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
Quoted 1 line · Dan Hollis
but where would the finger start pointing then?
hmm... *compiler optimizations* for a specific family cause problems on that family, but *compiler optimizations* for a lesser family don't... I'll admit my kernel h4x0|^ 5k1!!s aren't on par with most on this list, but has anyone thought to take a look at the *compiler optimizations* that are generated? It sure wouldn't be a first if the combination of agressive optimizations and complex kernel code exposed a subtle and/or complex bug in one, the other, or both... and different levels of compiler might explain why some have the problems, and others don't.
Having spent way too many hours this week looking at highly optimized 64bit ppc assembly I can only say that <drawl type=hick> them thar compiler hackors is devious lil twerps when yas ask fer all the bells n wistles. </drawl>
This of course is all assuming that one or more folks do recreate it on obviously good hardware. ;)
Signature · 2 lines
now the forces of openness have a powerful and unexpected new ally - http://ibm.com/linux
Quoted 9 lines · Dan Hollis
Quoted 6 lines · Albert D. Cahalan
Don't go blaming Linux when power supply upgrades sometimes make this problem go away. You could also try one of the recent SiS or ALi chipsets.
I just saw a reference (maybe www.tomshardware.com) to AMD's new chips having trouble on VIA boards -- I'd guess that the Palimino core can push the motherboard too hard without fancy Athlon code.
Quoted 6 lines
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply?
Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
My Dual Athlon (1.4GHz) works just fine (with the exception of the ATA 100 - I have to disable DMA).
It's been running 24/7 for weeks at 100% CPU usage (on both CPUs).
My A7V133 is another story (also a 1.4GHz). It used to work with RH 7.1, now I can't even get the OS to install.
PGA
Signature · 6 lines
Paul G. Allen UNIX Admin II/Programmer Akamai Technologies, Inc. www.akamai.com Work: (858)909-3630 Cell: (858)395-5043
Quoted 18 lines · Paul G. Allen
Quoted 9 lines · Dan Hollis
Quoted 7 lines · Albert D. Cahalan
Don't go blaming Linux when power supply upgrades sometimes make this problem go away. You could also try one of the recent SiS or ALi chipsets.
I just saw a reference (maybe www.tomshardware.com) to AMD's new chips having trouble on VIA boards -- I'd guess that the Palimino core can push the motherboard too hard without fancy Athlon code.Quoted 6 lines
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply?
Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
Quoted 8 lines
My Dual Athlon (1.4GHz) works just fine (with the exception of the ATA 100 - I have to disable DMA).
It's been running 24/7 for weeks at 100% CPU usage (on both CPUs).
My A7V133 is another story (also a 1.4GHz). It used to work with RH 7.1, now I can't even get the OS to install.
PGA
My dual 1.2 Athlon MPs work great as well. I have my DMA on without any troubles though. Actually I have never had a problem with Athlons and Linux. I have a 650MHz and a 1GHz as well and they are rock solid. I would look at your check your hardware before blaming the software. I have compiled kernel after kernel, made a couple graphic posters of the kernel, and run many simulations on it without incident.
I did however have one of those mammoth 460W power supplies fail on me though. As long as you don't use the AGP Pro slot on the board you should have more then enough power from it. I have 4 hard drives on it, two cdroms working, and about 8 fans without any problems.
Steve
Quoted 4 lines
It seems to work somewhat better for some if you set your BIOS to the conservative settings, but that didn't help me. I have an Epox 8KTA3+ (Via KT133A) w/ a 1.4GHz Athlon and 512MB memory.
I'm using an Epox 8KT3+ (VIA KT133A) motherboard, too. The processor is a 1.333GHz Athlon and I never had problems with the optimisation (CONFIG_MK7=y).
Signature · 3 lines
"I'm working on it." <http://www.psyche.kn-bremen.de/> 1998: U.S.Congress abolished Free Speech by replacing First Amendment with DMCA.
Quoted 10 lines · Chris Abbey
Quoted 1 line · Dan Hollis
but where would the finger start pointing then?
hmm... *compiler optimizations* for a specific family cause problems on that family, but *compiler optimizations* for a lesser family don't... I'll admit my kernel h4x0|^ 5k1!!s aren't on par with most on this list, but has anyone thought to take a look at the *compiler optimizations* that are generated?
It's not the compiler options. (or at least not alone). I have proof for this, let me explain:
For the upcomming Red Hat Linux release an athlon kernel will be included, and due to the people who have this problem, I added a kernel commandline option to disable the optimized page_copy() and clear_page() functions. The use of this option makes the machines, of the people who had this problem, happy again.
Now I also wrote the 2 functions in question, and I am very convinced that they are correct. They also work on the vast majority of motherboards, and most of the failure cases are cheaper motherboards (or cheap PSU's).
The net effect of using the optimized functions is that the memory bandwidth the CPU uses effecively doubles during COW and page_clear() operations. This puts additional load on the motherboard it seems.... I don't know if it's the voltage regulators or borderline ram chips that give up, but there are people who bought 25 identical machines (for a classroom) and only 1 failed, reproducable.
Oh and btw, having these functions is the main reason for enabling the "Athlon" CPU type; that's basically the real difference between a PII and Athlon compiled kernel.
Greetings,
Arjan van de Ven
On Friday 31 August 2001 01:27 am, Arjan van de Ven wrote:
<snip>
Quoted 4 lines
Now I also wrote the 2 functions in question, and I am very convinced that they are correct. They also work on the vast majority of motherboards, and most of the failure cases are cheaper motherboards (or cheap PSU's).
Want cheap hardware?
Slot-A Athlon 800Mhz non-tbird
Soyo K7VIA motherboard, VIA KX133 chipset
Generic 300W power supply bought from mwave
and, for the other hardware:
1 DVD-ROM drive
1 Plextor PlexWriter CD-RW drive
1 IBM 75GXP 7200RPM 45GB ATA/100 drive
1 Promise ATA/100 HDD controller
1 350MB Western Digital Caviar drive, but this powers down completely when not in use
2 Generic 80mm case fans
1 low-end HSF unit with three small fans
1 GeForce2MX
1 stick of generic 256MB PC133 SDRAM that refuses to run at 133Mhz 1 ISA NIC
1 PCI NIC
1 floppy drive, sony I think, otherwise generic
I have never experienced problems with Athlon optimizations, and I *always* compile with them enabled.
Prehaps the key lies in Thunderbird vs Non-Thunderbird? When did these problems start showing up, and at what clock speeds? What motherboards? What chipsets?
Quoted 2 lines
Greetings,
Arjan van de Ven
I have just such a system and thought I'd note that the stock smp kernels that redhat 7.1 and slackware 8.0 installed would lock up intermitently. I couldn't get through a build of the kernel. I ended up booting into the UP kernel, got and built the 2.4.9 kernel, and have not had any trouble since. For the processor type, I selected athlon, that enables the optimizations you are talking about right?
System specs: dual Athlon MP 1.2 Ghz on Tyan's mobo with the dual ethernet and u160 scsi, 512 megs corsair cas 2.5 registered pc2100 ddr sdram, and seagate's second generation 15,000 rpm cheetah, using the NMB 460 watt power supply that tyan recomended.
Quoted 8 lines · Dan Hollis
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply?
Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
-Dan
Re: Athlon doesn't like Athlon optimisation? [PATCH]
In reply to Albert D. CahalanQuoted 16 lines · [email protected] wrote:
Quoted 13 lines · Dan Hollis
Quoted 7 lines · Albert D. Cahalan
Don't go blaming Linux when power supply upgrades sometimes make this problem go away. You could also try one of the recent SiS or ALi chipsets.
I just saw a reference (maybe www.tomshardware.com) to AMD's new chips having trouble on VIA boards -- I'd guess that the Palimino core can push the motherboard too hard without fancy Athlon code.So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply?
Quoted 5 lines
Quoted 2 lines
Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-)
it has happened to me. dual athlon mp 1.2ghz w/ crucial reg. ddr sdram. after setting
CONFIG_MK7toCONFIG_MK6all works fine.
The following worked for me (Duron@800, Epox 8KTA2L)
root@WormHole:/usr/src# diff -u linux-2.4.9/arch/i386/lib/mmx.c{~,}
--- linux-2.4.9/arch/i386/lib/mmx.c~ Tue May 22 19:23:16 2001
+++ linux-2.4.9/arch/i386/lib/mmx.c Fri Aug 31 15:51:58 2001
@@ -97,7 +97,7 @@
return p;
}-#ifdef CONFIG_MK7
+#if 0
/*
* The K7 has streaming cache bypass load/store. The Cyrix III, K6 and
Signature · 11 lines
Radu-Adrian Feurdean mailto: [email protected] ------------------------------------------------------------------------------ +#if defined(__alpha__) && defined(CONFIG_PCI) + /* + * The meaning of life, the universe, and everything. Plus + * this makes the year come out right. + */ + year -= 42; +#endif -- From the patch for 1.3.2: (kernel/time.c), submitted by Marcus Meissner
Quoted 5 lines
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply?
Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
That would make it a lot more complex. There were a few cases much earlier on with AMD chipset lockups but those have been cured (and were an Athlon processor errata where a prefetch of an uncacheable line made a very very nasty mess).
Alan
Quoted 2 lines
My Dual Athlon (1.4GHz) works just fine (with the exception of the ATA 100 - I have to disable DMA).
There is a known errata with the dual athlon chipset where prefetching and IDE DMA together hang the box. You might want to scan the chip docs/errata and try turning that bit off and see if it helps. If so its one for pci quirks
Quoted 8 lines · Arjan van de Ven
For the upcomming Red Hat Linux release an athlon kernel will be included, and due to the people who have this problem, I added a kernel commandline option to disable the optimized
page_copy()andclear_page()functions. The use of this option makes the machines, of the people who had this problem, happy again.
Quoted 4 lines
Now I also wrote the 2 functions in question, and I am very convinced that they are correct. They also work on the vast majority of motherboards, and most of the failure cases are cheaper motherboards (or cheap PSU's).
Hey look, folks. I didn't point a finger and try to blame anybody or anything.
I'm as much a Linux advocate as the next guy. Granted, I have not tried every
trick under the sun to get it to work. I don't really care that much. I can live with my memory accesses taking a few microseconds longer. My point, and my only point, to all this was just to add data. If there's something relatively easy I can try, I will. Otherwise, life goes on.
Signature · 3 lines
David Hollister Driversoft Engineering: http://devicedrivers.com Digital Audio Resources: http://digitalaudioresources.org
Quoted 6 lines
It seems to work somewhat better for some if you set your BIOS to the conservative settings, but that didn't help me. I have an Epox 8KTA3+ (Via KT133A) w/ a 1.4GHz Athlon and 512MB memory. If you can't get it to work that way, just stick with the K6 setting. The point is, your hardware is likely fine (fine being relative, I suppose)
If there are other tricks, I'm all ears.
The i686 setting works perfectly.
rgds,
tim.
--
Quoted 8 lines · Tim Moore
Quoted 6 lines
It seems to work somewhat better for some if you set your BIOS to the conservative settings, but that didn't help me. I have an Epox 8KTA3+ (Via KT133A) w/ a 1.4GHz Athlon and 512MB memory. If you can't get it to work that way, just stick with the K6 setting. The point is, your hardware is likely fine (fine being relative, I suppose)
If there are other tricks, I'm all ears.The i686 setting works perfectly.
For some people. I have an 8KTA3+ that will boot as an i686, but starts oopsing its shorts off after it has been up a while.
I posted some of the oopsen a few months ago, and to my feeble mind they all looked memory related. (Several were "bug in slab.c" kind of thing, IIRC.)
Bobby Bryant
Austin, Texas
Quoted 10 lines · Bobby D. Bryant
Quoted 7 lines · Tim Moore
Quoted 6 lines
It seems to work somewhat better for some if you set your BIOS to the conservative settings, but that didn't help me. I have an Epox 8KTA3+ (Via KT133A) w/ a 1.4GHz Athlon and 512MB memory. If you can't get it to work that way, just stick with the K6 setting. The point is, your hardware is likely fine (fine being relative, I suppose)
If there are other tricks, I'm all ears.
Quoted 7 lines
Quoted 1 line
The i686 setting works perfectly.
For some people. I have an 8KTA3+ that will boot as an i686, but starts oopsing its shorts off after it has been up a while.
I posted some of the oopsen a few months ago, and to my feeble mind they all looked memory related. (Several were "bug in
slab.c" kind of thing, IIRC.
I hadn't heard a case of 686 not working given the compatability between Athlon/PIII. To be clear, CONFIG_M686=y has worked perfectly with 850MHz Athlon + VT82C686.
rgds,
tim.
--
Quoted 8 lines · Alan Cox
Quoted 4 lines
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply? Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
That would make it a lot more complex. There were a few cases much earlier on with AMD chipset lockups but those have been cured (and were an Athlon processor errata where a prefetch of an uncacheable line made a very very nasty mess).
Can you define a hardware configuration that if it fails under athlon optimizations, you would consider a falsification of the "marginal hardware" theory?
I want a hardware config that will get everyones attention if it fails.
-Dan
Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
Quoted 2 lines
optimizations, you would consider a falsification of the "marginal hardware" theory?
Not trivially.
The current theory is
VIA chipset + Athlon + [unknown factors]
So seeing it on SiS, AMD or Ali chipsets would be significant
Quoted 10 lines · Dan Hollis
Quoted 8 lines · Alan Cox
Quoted 4 lines
So what happens when someone is able to duplicate the problem on say AMD 760MP chipset with registered ECC PC2100 ram and 450W power supply? Not to say it has happened yet (I havent got my dual Tyan Tiger MP yet :-) but where would the finger start pointing then?
That would make it a lot more complex. There were a few cases much earlier on with AMD chipset lockups but those have been cured (and were an Athlon processor errata where a prefetch of an uncacheable line made a very very nasty mess).
Quoted 8 lines
Can you define a hardware configuration that if it fails under athlon optimizations, you would consider a falsification of the "marginal hardware" theory?
I want a hardware config that will get everyones attention if it fails.
From other posts, that would be boards based on AMD chipsets, and possibly
SIS or ALI.
Which kernel are you gentlemen using? I have a Athlon 1.2GHz (not overclocked), 512MB PC133, and also an EPoX 8KTA3+, and have had no problems whatsoever (using kernel 2.4.2-2).
----- Original Message -----
From: "David Hollister" <[email protected]>
To: "Jan Niehusmann" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, August 30, 2001 10:07 PM
Subject: Re: Athlon doesn't like Athlon optimisation?
Quoted 10 lines
Quoted 9 lines · Jan Niehusmann
I have a computer with a duron 600 which doesn't like current athlon optimised kernels: It runs fairly well with an old 2.4.0-test7 kernel (but I had some unexplained crashes during the last months), but crashes after a few minutes after booting 2.4.9-ac3 or 2.4.7.
If I don't build the kernels for athlon, but for i386 only, the system seems to be stable. (Not tested for more than 20 minutes, but definitely longer than the athlon optimised kernel was able to run)
Quoted 8 lines
Quoted 6 lines
Does anybody know these symptoms and has an idea what may be wrong? Is it likely to be a broken CPU?
The board is an A7V with the infamous via chipset, but I don't think this looks like the typical via problems, does it?Jan
This has apparently been a source of frustration for many an Athlon user,
myself
Quoted 5 lines
included. I can't even get my system to finish the init process before it oopses and locks up on me.
It seems to work somewhat better for some if you set your BIOS to the conservative settings, but that didn't help me. I have an Epox 8KTA3+
(Via
Quoted 1 line
KT133A) w/ a 1.4GHz Athlon and 512MB memory. If you can't get it to work
that
Quoted 1 line
way, just stick with the K6 setting. The point is, your hardware is
likely fine
Quoted 14 lines
(fine being relative, I suppose)
If there are other tricks, I'm all ears.--
David HollisterDriversoft Engineering: http://devicedrivers.com Digital Audio Resources: http://digitalaudioresources.org-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines
Which kernel are you gentlemen using?
No problems with: 2.4.5, 2.4.5ac24, 2.4.6, 2.4.7, 2.4.8ac4, 2.4.8ac7, 2.4.9ac5
Signature · 3 lines
"I'm working on it." <http://www.psyche.kn-bremen.de/> 1998: U.S.Congress abolished Free Speech by replacing First Amendment with DMCA.
Quoted 3 lines · Jim Roland
Which kernel are you gentlemen using? I have a Athlon 1.2GHz (not overclocked), 512MB PC133, and also an EPoX 8KTA3+, and have had no problems whatsoever (using kernel 2.4.2-2).
I'm on 2.4.9. No overclocking. I applied the patch that somebody (sorry, forgot who) posted yesterday for arch/i386/lib/mmx.c and rebuilt the kernel with Athlon optimization. It now works.
Signature · 3 lines
David Hollister Driversoft Engineering: http://devicedrivers.com Digital Audio Resources: http://digitalaudioresources.org
Quoted 3 lines
I'm on 2.4.9. No overclocking. I applied the patch that somebody (sorry, forgot who) posted yesterday for
arch/i386/lib/mmx.cand rebuilt the kernel with Athlon optimization. It now works.
Well not really. The patch posted turns off athlon optimisation even though you selected it
Quoted 5 lines · Alan Cox
Quoted 2 lines
I'm on 2.4.9. No overclocking. I applied the patch that somebody (sorry, forgot who) posted yesterday for
arch/i386/lib/mmx.cand rebuilt the kernel with Athlon optimization. It now works.Well not really. The patch posted turns off athlon optimisation even though you selected it
Well, that's what I thought, too, since that was the only file in the kernel source where CONFIG_MK7 was defined. Somebody pointed out to me, though, that there are other defines that are turned on if you use Athlon settings, like (from arch/i386/config.in):
CONFIG_X86_GOOD_APICCONFIG_X86_USE_3DNOWCONFIG_X86_PGE
Although, looking at arch/i386/config.in again right now, I see none of these are Athlon specific. That's what I get for trusting somebody else instead of looking into it myself.
Thanks.
Signature · 3 lines
David Hollister Driversoft Engineering: http://devicedrivers.com Digital Audio Resources: http://digitalaudioresources.org
Hmm...missed that patch, but I'm not on 2.4.9 yet. Can someone email that to me directly or repost to the list?
----- Original Message -----
From: "David Hollister" <[email protected]>
To: "Jim Roland" <[email protected]>
Cc: "Jan Niehusmann" <[email protected]>; <[email protected]>
Sent: Saturday, September 01, 2001 9:39 AM
Subject: Re: Athlon doesn't like Athlon optimisation?
Quoted 3 lines
Quoted 2 lines · Jim Roland
Which kernel are you gentlemen using? I have a Athlon 1.2GHz (not overclocked), 512MB PC133, and also an EPoX 8KTA3+, and have had no
problems
Quoted 4 lines
Quoted 1 line
whatsoever (using kernel 2.4.2-2).
I'm on 2.4.9. No overclocking. I applied the patch that somebody (sorry, forgot who) posted yesterday for
arch/i386/lib/mmx.cand rebuilt the
kernel with
Quoted 6 lines
Athlon optimization. It now works.
--
David HollisterDriversoft Engineering: http://devicedrivers.com Digital Audio Resources: http://digitalaudioresources.org
Quoted 9 lines · Alan Cox
Quoted 2 lines
optimizations, you would consider a falsification of the "marginal hardware" theory?
Not trivially.
The current theory is
VIA chipset + Athlon + [unknown factors]So seeing it on SiS, AMD or Ali chipsets would be significant
Would it help with the tracking if someone had a board that reliably crashes before /etc/rc.d/rc finishes running? And were willing to help with the investigation?
Eric