Aha1542 problem
Hi,
unrelated to any other event, my aha1542b starts to fail. I find messages like these below in my log. Unloading and reloading the driver helps, but only for a short time.
HACC <4>aha1542.c: interrupt received, but no mail.aha1542.c: Unable to abort command for target 0aha1542.c: Trying device reset for target 0
HACC <4>aha1542.c: interrupt received, but no mail.
HACC <4>aha1542.c: interrupt received, but no mail.aha1542.c: Unable to abort command for target 0
Sent BUS RESET to scsi host 0aha1542.c: interrupt received, but no mail.
scsi: device set offline - not ready or command retry failed after host reset: host 0 channel 0 id 0 lun 0
st0: Error 2 (sugg. bt 0x0, driver bt 0x0, host bt 0x0).
scsi : 0 hosts left.
System: Dual P-200 MMX, Kernel 2.4.8-pre3 with ext3 patch.
/proc/interrupts:
CPU0 CPU1
0: 57555063 58669574 IO-APIC-edge timer 1: 0 2 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 3: 1 3 IO-APIC-edge serial 8: 26 30 IO-APIC-edge rtc 10: 339970 351627 IO-APIC-edge aha1542 17: 5557414 5562660 IO-APIC-level ide0 18: 13365797 13366581 IO-APIC-level eth0 NMI: 0 0 LOC: 116232016 116232731 ERR: 0 MIS: 0
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TANDBERG Model: TDC 4222 Rev: =07:
Type: Sequential-Access ANSI SCSI revision: 02
Thanks,
hjb
Signature · 2 lines
Pro-Linux - Germany's largest volunteer Linux support site http://www.pro-linux.de/