Preemption Latency Measurement Tool
Quoted 7 lines · Dieter Nützel
Quoted 2 lines
Does your audio source depend on any files (eg mp3s) and if so, could they be moved to a ramfs? Do the skips go away then?
Good point.
I've copied one video (MP2) and one Ogg-Vorbis file into
/dev/shm. Little bit better but hiccup still there :-(
As I've been saying, the problem really shouldn't be disk I/O. I would think (and really hope) the readahead code can fit a little mp3 in memory. Even if not, its a quick read to load it. The continued blips you see are caused by something, well, continual :)
Quoted 7 lines
dbench 16
Throughput 25.7613 MB/sec (NB=32.2016 MB/sec 257.613 MBit/sec)
7.500u 29.870s 1:22.99 45.0% 0+0k 0+0io 511pf+0wWorst 20 latency times of 3298 measured in this period.
usec cause mask start line/file address end line/file 11549 spin_lock 1 678/inode.c c01566d7 704/inode.c
A single 11ms latency is not bad. Again, this looks OK.
Quoted 6 lines
*******************************************************
dbench 16 + renice artsd -20 works
GREAT!*******************************************************
Great :)
Quoted 11 lines
dbench 32 and above + renice artsd -20 fail
Writing this during dbench 32 ...:-)))
dbench 32 + renice artsd -20
Throughput 18.5102 MB/sec (NB=23.1378 MB/sec 185.102 MBit/sec)
15.240u 63.070s 3:49.21 34.1% 0+0k 0+0io 911pf+0wWorst 20 latency times of 3679 measured in this period.
usec cause mask start line/file address end line/file 17625 spin_lock 1 678/inode.c c01566d7 704/inode.c
What do you mean failed?
Signature · 3 lines
Robert M. Love rml at ufl.edu rml at tech9.net