Skip to contentSkip to conversation

Wrong SCSI bus scanning

DISCUSSION Jan-Benedict Glaw 1 participant 1 message Sep 25, 2001

lore
Share & tools
lore
#0 lore raw

Hi!

For me, SCSI bus # 2 gets double-assigned. Physical layout is currently:

Bus 0: AIC7xxx (U160 onboard)
- ID0: IBM DDYS-T18350N

Bus 1: AIC7xxx (2nd U160 onboard bus)
- unused

Bus 2: sym53c8xx ('875)
- ID1: PLEXTOR CD-R PX-W1210S
- ID2: PLEXTOR CD-ROM PX-40TS
- ID3: PIONEER DVD-ROM DVD-305

Bus 3: ncr53c8xx ('810)
- ID0: HP CD-Writer 6020
- ID1: PLASMON CDR4220

The U160 controller attaches to my boot disk, so it is compiled-in. Both other drivers are modules.

When I insert modules for busses #2 and #3, *both* of them get bus #2 assigned:

==> before additional modules:

weiss-ich-doch-nicht:~# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0     0) 'IBM     ' 'DDYS-T18350N    ' 'S96H' Disk
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

==> after sym53c8xx:

weiss-ich-doch-nicht:~# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0     0) 'IBM     ' 'DDYS-T18350N    ' 'S96H' Disk
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
scsibus2:
        2,0,0   200) *
        2,1,0   201) 'PLEXTOR ' 'CD-R   PX-W1210S' '1.02' Removable CD-ROM
        2,2,0   202) 'PLEXTOR ' 'CD-ROM PX-40TS  ' '1.12' Removable CD-ROM
        2,3,0   203) 'PIONEER ' 'DVD-ROM DVD-305 ' '1.03' Removable CD-ROM
        2,4,0   204) *
        2,5,0   205) *
        2,6,0   206) *
        2,7,0   207) *

==> after additional insertion of ncr53c8xx:
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:

        0,0,0     0) 'IBM     ' 'DDYS-T18350N    ' 'S96H' Disk
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
scsibus2:
        2,0,0   200) 'HP      ' 'CD-Writer 6020  ' '1.07' Removable CD-ROM
        2,1,0   201) 'PLEXTOR ' 'CD-R   PX-W1210S' '1.02' Removable CD-ROM
        2,2,0   202) 'PLEXTOR ' 'CD-ROM PX-40TS  ' '1.12' Removable CD-ROM
        2,3,0   203) 'PIONEER ' 'DVD-ROM DVD-305 ' '1.03' Removable CD-ROM
        2,4,0   204) *
        2,5,0   205) *
        2,6,0   206) *
        2,7,0   207) *

==> Now, /proc/scsi/scsi contains:

weiss-ich-doch-nicht:/proc/scsi# cat scsi 
Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM      Model: DDYS-T18350N     Rev: S96H
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 01 Lun: 00 <---------------------------
  Vendor: PLEXTOR  Model: CD-R   PX-W1210S Rev: 1.02
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 02 Lun: 00
  Vendor: PLEXTOR  Model: CD-ROM PX-40TS   Rev: 1.12
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 03 Lun: 00
  Vendor: PIONEER  Model: DVD-ROM DVD-305  Rev: 1.03
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: HP       Model: CD-Writer 6020   Rev: 1.07
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 01 Lun: 00 <---------------------------
  Vendor: PLASMON  Model: CDR4220          Rev: 1.20
  Type:   CD-ROM                           ANSI SCSI revision: 02

...which is obviously wrong. Any suggestion on where to start to search the bug?

MfG, JBG

Signature · 1 line
Jan-Benedict Glaw . [email protected] . +49-172-7608481