Skip to contentSkip to conversation

Reproducible Oops: 2.4.10 Initio SCSI driver (tul_alloc_scb)

DISCUSSION David Brown 1 participant 1 message Sep 30, 2001

lore
Share & tools
lore
#0 lore raw

Hi:

On a Domex 3194U pci ultra scsi card, i'm able to produce the oops below with any fast read access to an attached yamaha 16/10/40 CD-RW (2100S). cat /dev/cdroms/cdrom0 > /dev/null reproduces it quite well on a couple of machines. It doesn't seem to show up when reading a mounted filesystem, though.

The driver is for the Initio 9100 chip, in initio.o.

---

Unable to handle kernel paging request at virtual address 00e21200
c49a41ff
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c49a41ff>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010006
eax: c249fa00 ebx: c49a6e60 ecx: 00000087 edx: 00e21200
esi: c2852800 edi: c49a6e60 ebp: c2852800 esp: c1b7fe6c
ds: 0018 es: 0018 ss: 0018
Process cat (pid: 17830, stackpage=c1b7f000)

Stack: 00000246 c49a36d7 c49a6e60 00000246 c0782978 c249fa00 c4996531 c2852800
       c499af50 c2852800 c0782978 c2852904 c0782920 00000000 c499c59f c2852800
       c2852800 00000286 c1b7feec c1b7e000 c1b7ff14 c49be800 c249fa00 c1c45000
Call Trace: [<c49a36d7>] [<c49a6e60>] [<c4996531>] [<c499af50>] [<c499c59f>]
   [<c49be800>] [<c0180a64>] [<c0117bbc>] [<c013156e>] [<c01222b9>] [<c01222fe>]
   [<c0122811>] [<c0122ce5>] [<c0122c10>] [<c012da76>] [<c0106b0b>]
Code: 8b 02 89 43 38 85 c0 75 08 c7 43 3c 00 00 00 00 90 c7 02 00
Quoted 1 line
Quoted 1 line

EIP; c49a41fe <[initio]tul_alloc_scb+e/30> <=====

Trace; c49a36d6 <[initio]i91u_queue+36/68> Trace; c49a6e60 <[initio]tul_hcs+0/860>
Trace; c4996530 <[scsi_mod]__kstrtab_scsi_hostlist+a/18> Trace; c499af50 <[scsi_mod]scsi_old_done+0/578> Trace; c499c59e <[scsi_mod]scsi_request_fn+2c2/2f8> Trace; c49be800 <[sr_mod]sr_template+0/0> Trace; c0180a64 <generic_unplug_device+20/28> Trace; c0117bbc <__run_task_queue+50/5c>^Z Trace; c013156e <block_sync_page+16/1c>
Trace; c01222b8 <__lock_page+64/94>
Trace; c01222fe <lock_page+16/1c>
Trace; c0122810 <do_generic_file_read+2a4/4bc> Trace; c0122ce4 <generic_file_read+80/19c> Trace; c0122c10 <file_read_actor+0/54>
Trace; c012da76 <sys_read+96/cc>
Trace; c0106b0a <system_call+32/38>
Code; c49a41fe <[initio]tul_alloc_scb+e/30> 0000000000000000 <_EIP>:
Code; c49a41fe <[initio]tul_alloc_scb+e/30> <=====
0: 8b 02 mov (%edx),%eax <=====
Code; c49a4200 <[initio]tul_alloc_scb+10/30>
2: 89 43 38 mov %eax,0x38(%ebx)
Code; c49a4202 <[initio]tul_alloc_scb+12/30>
5: 85 c0 test %eax,%eax
Code; c49a4204 <[initio]tul_alloc_scb+14/30>
7: 75 08 jne 11 <_EIP+0x11> c49a420e <[initio]tul_alloc_scb+1e/30>
Code; c49a4206 <[initio]tul_alloc_scb+16/30>
9: c7 43 3c 00 00 00 00 movl $0x0,0x3c(%ebx)
Code; c49a420e <[initio]tul_alloc_scb+1e/30>
10: 90 nop
Code; c49a420e <[initio]tul_alloc_scb+1e/30>
11: c7 02 00 00 00 00 movl $0x0,(%edx)
---

If anyone needs any further information, feel free to ask. :)

Thanks in advance,
- Dave
[email protected]