What have I done!?
---------- Original Message ----------------------------------
From: [email protected]
Reply-To: [email protected]
Date: Thu, 4 Oct 2001 00:44:25 -0500
Quoted 22 lines · Jason A. Lixfeld
Quoted 9 lines
hdj:
read_intr: error=0x04 { DriveStatusError }
hdj:read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdj:read_intr: error=0x04 { DriveStatusError }
hdj:read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdl:read_intr: error=0x04 { DriveStatusError }
hdl:read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdl:read_intr: error=0x04 { DriveStatusError }
hdl:read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }Those are IDE driver errors. Judging from the drive devices, you have quite a few ide controllers. Did you compile in the drivers for all of them? Some of the cards (and even some on-board chipsets) are NOT supported by default. In particular, Promise & HiPoint cards require special kernel compile time options.
What do you see in
/proc/ide?Note that if you compiled the drivers as modules, those modules MUST be loaded BEFORE lvm is started.
Quoted 9 lines
Michael Kellen
$ fortune -m Kellen_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
So far I have no problems with Promise & HiPoint kernel drivers. Please indicate your chipset, cpu and all compiled ide drivers. This will help to see a pattern here.
-Tim.