Skip to contentSkip to conversation

GDB + VisionICE?

DISCUSSION Boerner, Brian 1 participant 1 message Oct 4, 2001

lore
Share & tools
lore
#0 lore raw

I would contact your wrs fae. I've heard through the grapevine that some beta firmware exists (it may be released firmware now) that supports the MMU. I couldn't find it in my mail but it was something like:
MMU=LINUX

It might be worth exploring. I've also had good luck with the AMC PowerTAP product as well. But that's neither here nor there.

-bmb

Quoted 20 lines

-----Original Message-----
From: Peter Desnoyers [mailto:[email protected]]
Sent: Wednesday, October 03, 2001 12:21 PM
To: [email protected]
Subject: GDB + VisionICE?

[this is a resend - I sent it with an incorrect from: address, and it didn't make it to the list]

Has anyone configured GDB to work with a VisionICE II for a powerpc target?It looks like the remote-est target is close, but only works for m68k targets. It might not be much work to adapt it for powerpc, which leads to the second question:

Is this a pointless exercise due to the lack of VisionICE support for the
MMU, or would it be worthwhile?

Quoted 8 lines

Thanks,
--
.....................................................................

Peter Desnoyers            (781) 457-1165   [email protected]
Chinook Communications     (617) 661-1979   [email protected]

100 Hayden Ave, Lexington MA 02421

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/