Kernel 2.4.12 Compiling error.
In the new Kernel 2.4.12, when attempting to compile modules, the parport module dies, I'm attempting to compile it with IEEE1284 readback support (HP OJ T45 printer)
make -C parport modules
make[2]: Entering directory `/usr/src/linux-2.4.12/drivers/parport' gcc -D__KERNEL__ -I/usr/src/linux-2.4.12/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -c -o
ieee1284_ops.o ieee1284_ops.cieee1284_ops.c: In function `ecp_forward_to_reverse':
ieee1284_ops.c:365: `IEEE1284_PH_DIR_UNKNOWN' undeclared (first use in this function)
ieee1284_ops.c:365: (Each undeclared identifier is reported only once ieee1284_ops.c:365: for each function it appears in.) ieee1284_ops.c: In function `ecp_reverse_to_forward':
ieee1284_ops.c:397: `IEEE1284_PH_DIR_UNKNOWN' undeclared (first use in this function)
make[2]: *** [ieee1284_ops.o] Error 1
make[2]: Leaving directory `/usr/src/linux-2.4.12/drivers/parport' make[1]: *** [_modsubdir_parport] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.12/drivers'
make: *** [_mod_drivers] Error 2
Is the error I get.
--
Malcolm D. Mallardi - Dark Freak At Large
"Captain, we are receiving two-hundred eighty-five THOUSAND hails."
AOL: Nuark UIN: 11084092 Y!: Magamo Jabber: [email protected]
http://ranka.2y.net/~magamo/index.htm
Quoted 2 lines · * Malcolm Mallardi ([email protected]) wrote:
In the new Kernel 2.4.12, when attempting to compile modules, the parport module dies, I'm attempting to compile it with IEEE1284 readback support
this is known. check archives. patch is here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=100278983703821&w=2
-chris
Quoted 3 lines · Malcolm Mallardi
In the new Kernel 2.4.12, when attempting to compile modules, the parport module dies, I'm attempting to compile it with IEEE1284 readback support (HP OJ T45 printer)
This patch fixes:
ieee1284_ops.c Thu Oct 11 11:22:31 2001 renamed from ieee1284_ops.c~ Thu Oct 11 11:10:37 2001 +2 -2
@@ -362,7 +362,7 @@ } else { DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n", port->name); - port->ieee1284.phase = IEEE1284_PH_DIR_UNKNOWN; + port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN; } return retval;
@@ -394,7 +394,7 @@ DPRINTK (KERN_DEBUG "%s: ECP direction: failed to switch forward\n", port->name); - port->ieee1284.phase = IEEE1284_PH_DIR_UNKNOWN; + port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN; }
Robert Love