Skip to contentSkip to conversation

USB module ov511 dies after about 30 minutes

DISCUSSION Stephan von Krawczynski 4 participants 8 messages Oct 20, 2001 – Oct 22, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I have a webcam model creative webcam III. I read from it every minute. After about 30 minutes the module ov511 cannot be unloaded anymore, stopped working (of course, only black pictures are delivered) and there are no error messages what so ever. This can only be resolved by rebooting. Any hints? Used kernel 2.4.13-pre5.
Used to work with 2.4.10.

Regards,
Stephan

#1 lore raw

On Sat, 20 Oct 2001, Stephan von Krawczynski wrote:

Hi Stephan,

Quoted 2 lines

I have a webcam model creative webcam III. I read from it every minute. After about 30 minutes the module ov511 cannot be unloaded anymore, stopped working

I've experienced some problems with the kernel version for quite a while, (pictures with strange colours etc), but the version on the authors webpage at http://alpha.dyndns.org/ov511/ is working for me fine. You may want to give it a try and see if it fixes your problems too.

regards,

Dave.

Signature · 2 lines
| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs
#5 lore raw
In reply to Stephan von Krawczynski

Hi,

The OV511 module in the kernel, is unfortunately, extremely old. You should use the updated modules from (alpha.dyndns.org/ov511).

Jeffrey H. Ingber (jhingber _at_ ix.netcom.com)

Quoted 16 lines · Stephan von Krawczynski

Hello,

I have a webcam model creative webcam III. I read from it every minute. After about 30 minutes the module ov511 cannot be unloaded anymore, stopped working (of course, only black pictures are delivered) and there are no error messages what so ever. This can only be resolved by rebooting. Any hints? Used kernel 2.4.13-pre5.
Used to work with 2.4.10.

Regards,
Stephan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#6 lore raw
Quoted 3 lines

Hi,

The OV511 module in the kernel, is unfortunately, extremely old.

I am currently testing the latest version.
Only one question about the topic:
why is the latest driver not included in the kernel-tree? It seems not very useful to include a currently broken driver at all. Can somebody give a hint to the maintainer, is he listening?
This seems to be a more global topic after all: I found out that the current kernel-driver for rocket serial cards is broken, too. It doesn't even recognise the pci cards (the pci code in it does not work).
Of course there is a working driver available at Control Inc. Why is it not included in the kernel? The one included is coming right from the stone-age.
Is there anybody actively checking the drivers for availability of new versions? We obviously cannot trust on the authors themselves to commit them, may not be their fault or even job. Who is to do that in current maintaining actions? Linus, can you comment?

Regards,
Stephan

#2 lore raw
In reply to Dave Jones
Quoted 5 lines · On Sat, 20 Oct 2001 18:50:49 +0200 (CEST) Dave Jones <[email protected]> wrote:

On Sat, 20 Oct 2001, Stephan von Krawczynski wrote:

Hi Stephan,

Quoted 1 line

I have a webcam model creative webcam III. I read from it every minute.

After

Quoted 1 line
Quoted 1 line

about 30 minutes the module ov511 cannot be unloaded anymore, stopped

working

Quoted 5 lines

I've experienced some problems with the kernel version for quite a while, (pictures with strange colours etc), but the version on the authors webpage at http://alpha.dyndns.org/ov511/ is working for me fine. You may want to give it a try and see if it fixes your problems too.

Sorry, tested but does not work either. It even hangs the system sometimes. Of course it did with former kernels. Any other ideas?

Regards,
Stephan

#3 lore raw
Quoted 4 lines · Stephan von Krawczynski
Quoted 2 lines
Quoted 2 lines

about 30 minutes the module ov511 cannot be unloaded anymore, stopped working

Sorry, tested but does not work either. It even hangs the system sometimes. Of course it did with former kernels. Any other ideas?

Remind me, what kernel version was this ? Until 2.4.12 iirc usb-uhci had problems with ov511. Using the alternative uhci driver may also be something worth trying. Other than that, I'm out of ideas. USB gurus ?

regards,

Dave.

Signature · 2 lines
| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs
#4 lore raw
Quoted 5 lines · On Mon, 22 Oct 2001 15:50:08 +0200 (CEST) Dave Jones <[email protected]> wrote:
Quoted 3 lines · Stephan von Krawczynski
Quoted 2 lines
Quoted 2 lines

about 30 minutes the module ov511 cannot be unloaded anymore, stopped working

Sorry, tested but does not work either. It even hangs the system sometimes.

Of

Quoted 5 lines
Quoted 1 line

course it did with former kernels. Any other ideas?

Remind me, what kernel version was this ? Until 2.4.12 iirc usb-uhci had problems with ov511. Using the alternative uhci driver may also be something worth trying. Other than that, I'm out of ideas. USB gurus ?

Kernel is 2.4.13-pre5, will test pre6 this evening.

Regards,
Stephan

#7 lore raw
In reply to Jeffrey H. Ingber
Quoted 4 lines · Stephan von Krawczynski

Is there anybody actively checking the drivers for availability of new versions? We obviously cannot trust on the authors themselves to commit them, may not be their fault or even job. Who is to do that in current maintaining actions?

It's up to the driver's authors to push updates through the proper channels to keep the in kernel versions up to date.

In this case, go pester [email protected] to get him to send in a patch to the USB maintainer.

thanks,

greg k-h