Skip to contentSkip to conversation

severe ns558 joystick problems with 2.4.12

DISCUSSION Jeremy M. Dolan 2 participants 2 messages Oct 21, 2001 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

I posted to linux-kernel 10 days ago with this problem, didn't really get any follow up, except other users having the same problem. So far have had 6 users contact me with the same problem, seems to have occured as early as 2.4.9 and .10, based on what I've heard from others.

To recap:

I have a 2 axis 6 button analog (ns558) gamepad. With 2.4.7, everything is fine, as long as I pass js=gamepad, it detects the 2 axis and 6 buttons.

With 2.4.12, with js=gamepad and js=12531 (bitfield forced detection), the kernel message SAYS it detects 2 axis and 6 buttons, however when I use it (for example, with the jstest program), the two axis and buttons 4/5 don't register. The first four (0-3) buttons are fine.

Signature · 2 lines
Jeremy M. Dolan <mailto:[email protected]> <http://turbogeek.org/>
PGP: 1024D/DC433DEE 494C 7A6E 19FB 026A 1F52  E0D5 5C5D 6228 DC43 3DEE
#1 lore raw
Quoted 7 lines · Jeremy M. Dolan

I posted to linux-kernel 10 days ago with this problem, didn't really get any follow up, except other users having the same problem. So far have had 6 users contact me with the same problem, seems to have occured as early as 2.4.9 and .10, based on what I've heard from others.

To recap:

Quoted 8 lines

I have a 2 axis 6 button analog (ns558) gamepad. With 2.4.7, everything is fine, as long as I pass js=gamepad, it detects the 2 axis and 6 buttons.

With 2.4.12, with js=gamepad and js=12531 (bitfield forced detection), the kernel message SAYS it detects 2 axis and 6 buttons, however when I use it (for example, with the jstest program), the two axis and buttons 4/5 don't register. The first four (0-3) buttons are fine.

The bug was introduced in 2.4.10. I've sent a patch that fixes it to Linus already, one before 2.4.11, and one after 2.4.12, when I noticed the fix didn't get in it. Here it is (first chunk is the important thing, second chunk is just to avoid nonsensical values be printed on too fast CPUs):

drivers/char/joystick/analog.c +4 -2
@@ -138,7 +138,7 @@
 
 #ifdef __i386__
 #define TSC_PRESENT	(test_bit(X86_FEATURE_TSC, &boot_cpu_data.x86_capability))
-#define GET_TIME(x)	do { if (TSC_PRESENT) rdtscl(x); else outb(0, 0x43); x = inb(0x40); x |= inb(0x40) << 8; } while (0)
+#define GET_TIME(x)	do { if (TSC_PRESENT) rdtscl(x); else { outb(0, 0x43); x = inb(0x40); x |= inb(0x40) << 8; } } while (0)
 #define DELTA(x,y)	(TSC_PRESENT?((y)-(x)):((x)-(y)+((x)<(y)?1193180L/HZ:0)))
 #define TIME_NAME	(TSC_PRESENT?"TSC":"PIT")
 #elif __x86_64__
@@ -499,7 +499,9 @@
 	else
 		printk(" [%s timer, %d %sHz clock, %d ns res]\n", TIME_NAME,
 		port->speed > 10000 ? (port->speed + 800) / 1000 : port->speed,
-		port->speed > 10000 ? "M" : "k", (port->loop * 1000000) / port->speed);
+		port->speed > 10000 ? "M" : "k",
+		port->speed > 10000 ? (port->loop * 1000) / (port->speed / 1000)
+				    : (port->loop * 1000000) / port->speed);
 }
 
 /*
Signature · 2 lines
Vojtech Pavlik
SuSE Labs