Skip to contentSkip to conversation

2.4.13-pre6 and 2.4.12-ac5 fail under load

DISCUSSION Hans-Joachim Baader 1 participant 1 message Oct 23, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I've done a stress test which 2.4.12-ac5 fails. I can now reproduce the problem in 2.4.13-pre6, although it takes much longer there. It is probably NFS or ethernet driver related.

The test consists of mounting a NFS volume from a file server (kernel 2.4.10), changing to a directory on that volume and starting to rip a CD. Using abcde and distmp3, I distribute the load of converting the wav files to ogg on several machines.

Sometime during the conversion the system loses its network connection, ping doesn't work anymore, NFS stalls. Even after unload and reload of the network driver the network card doesn't work anymore. A reboot is necessary. There are no useful messages in the logs. I guess I use NFSv3 (how can I tell exactly?).

Hardware: AMD K6/2-400, 256 MB RAM (using KDE 2.2.1, about 40 MB of swap are used too, but about 150 MB are in the cache, so this seems to be OK), Matrox G450, Via Rhine II based network card, SB Live 1024 with Alsa driver.

Also, the interactive feel of 2.4.13-pre6 is much better than ac5 and the load average is much lower (about 2.5 versus 5).

Regards,
hjb

Signature · 6 lines
Pro-Linux - Germany's largest volunteer Linux support site
http://www.pro-linux.de/

-- 
Pro-Linux - Germany's largest volunteer Linux support site
http://www.pro-linux.de/