Skip to contentSkip to conversation

unnumbered interfaces?

DISCUSSION Mark Clayton 5 participants 5 messages Oct 23, 2001 – Nov 2, 2001

lore
Share & tools
lore
#0 lore raw

I'm trying to understand unnumbered interfaces. From searching the web, they seem to be point-to-point links that do not have IP numbers (hence the name). This is what alludes:

1) How do you set a pair on linux boxes to do this? ppp?
2) How would a program send data across the link? Via
sockets? Or thru /dev/something0?
3) Does it make sense that to use ethernet? Not to me
but sometimes I'm wrong :)

I'm sure I'm missing the obvious. I usually do. Can anyone shed some light on this topic?

Thanks,
Mark
--
Mark & Kathy Clayton
S/V Brown Pelican
http://www.brown-pelican.com/

#1 lore raw
Quoted 15 lines

I'm trying to understand unnumbered interfaces. From searching the web, they seem to be point-to-point links that do not have IP numbers (hence the name). This is what alludes:

1) How do you set a pair on linux boxes to do this? ppp?
2) How would a program send data across the link? Via
sockets? Or thru /dev/something0?
3) Does it make sense that to use ethernet? Not to me
but sometimes I'm wrong :)

I'm sure I'm missing the obvious. I usually do. Can anyone shed some light on this topic?

Quoted 8 lines

Thanks,
Mark
--
Mark & Kathy Clayton
S/V Brown Pelican
http://www.brown-pelican.com/

Hi,

AFAIK, unnumbered interfaces are used only on routers on serial links and things like pos. Basically one would then enter a route entry routing one or more ip-blocks via an interface, not via the ip of a neigbouring router, in stead of the ip address of the neigbouring router one enters the name of the interface to use for this route.

Since these interfaces have no ip address, they cannot be the source of ip packets. Applications that generate ip traffic on such a router will use a different ip address on that router a the source ip, even if the packet has to go out on an unnumbered interface.

Having said this, unnumbered interfaces are quite rare in ip networks, most backbones use ip addresses on all of the interfaces of their routers. (do a traceroute to anywhere, you'll find very few hops that show no ip address).

Signature · 10 lines
Met vriendelijke groeten,

Remco Post

SARA - Stichting Academisch Rekencentrum Amsterdam
High Performance Computing  Tel. +31 20 592 8008    Fax. +31 20 668 3167

"I really didn't foresee the Internet. But then, neither did the computer
industry. Not that that tells us very much of course - the computer industry
didn't even foresee that the century was going to end." -- Douglas Adams
#2 lore raw
Quoted 3 lines · Remco Post

Having said this, unnumbered interfaces are quite rare in ip networks, most backbones use ip addresses on all of the interfaces of their routers. (do a traceroute to anywhere, you'll find very few hops that show no ip address).

unnumbered interfaces are more common than you think -- most dialup ppp servers use them. iirc the linux pppd supports them too.

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
#3 lore raw
In reply to Remco Post
Quoted 3 lines · In article <[email protected]> you wrote:
Quoted 3 lines

I'm trying to understand unnumbered interfaces. From searching the web, they seem to be point-to-point links that do not have IP numbers (hence the name).

It is Cisco Speak. In Linux you simply give the Interface an IP Address of an exisiting Interface, and then you have an "unnumbered" interface. It simply means it does not add an additional address.

Routing in modern operating systems is so easy and natural with interface and host routes, dont worry about cisco legacy.

Greetings
Bernd

#4 lore raw

Re: unnumbered interfaces? - OT

Quoted 5 lines · Bernd Eckenfels
Quoted 3 lines · In article <[email protected]> you wrote:
Quoted 3 lines

I'm trying to understand unnumbered interfaces. From searching the web, they seem to be point-to-point links that do not have IP numbers (hence the name).

They are in fact, used for point-to-point links. It allows someone to build a kind of distributed router; Kind of like the old IBM remote bridge arrangemets. Those had either a token ring or ethernet card and a WAN card of some kind (usually SDLC or X.25) connecting them together. Kind of cool in a weird, expensive sort of way.

Quoted 14 lines

It is Cisco Speak. In Linux you simply give the Interface an IP Address of an exisiting Interface, and then you have an "unnumbered" interface. It simply means it does not add an additional address.

Routing in modern operating systems is so easy and natural with interface and host routes, dont worry about cisco legacy.

Greetings
Bernd
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/