Skip to contentSkip to conversation

APIC and "ISA" interrupts.

DISCUSSION Rogier Wolff 1 participant 1 message Oct 25, 2001

lore
Share & tools
lore
#0 lore raw

After upgrading our fileserver to 2.4, I can't seem to get the ISDN card to work. I think that's because the kernel is using the APIC to route interrupts, such that my BIOS configuration "used-by-Legacy-ISA" is no longer in effect.

I tried disabling the APIC with the following results:

Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz disableapic

as far as I can see, the code to print "local apci disabled by bios" is not called if "disableapic" is on the commandline.

This is linux-2.4.10 that I got with SuSE 7.3

Roger.

Signature · 4 lines
** [email protected] ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots. 
* There are also old, bald pilots.