Skip to contentSkip to conversation

opl3sa2 sound driver and mixers

DISCUSSION Alex Deucher 6 participants 9 messages Oct 29, 2001 – Oct 30, 2001

lore
Share & tools
lore
#0 lore raw

I have a toshiba portege 3020ct and a libretto 50ct with a opl3sa2 sound chips. The modules load ok and sound works, but an extra mixer seems to always load. I always suspected t was because of code sharing or somthing, but I thought I'd ask here to see if it was a bug or just a quirk of the driver. I don't have the notebook on hand right, now do these are from memory. When I load sound, several modules get loaded, opl3sa2 and AD18?? (can't remember the number off hand). What's strange is that 2 mixers seem to get loaded. The first is for a CS4??? (can't recall the exact numbers) and the second is for the opl3sa2. The problem is that most sound applications like gmix for example, seem to enumerate the CS4??? mixer (which does nothing) as the first mixer and the opl3sa2 mixer (which works) as the second mixer. Why is that? Is there a way to get rid of the CS4??? mixer or have it be enumerated as the second mixer device?

Just curious,

Alex

__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com

#1 lore raw
Quoted 7 lines

sound works, but an extra mixer seems to always load. I always suspected t was because of code sharing or somthing, but I thought I'd ask here to see if it was a bug or just a quirk of the driver. I don't have the notebook on hand right, now do these are from memory. When I load sound, several modules get loaded, opl3sa2 and AD18?? (can't remember the number off hand).

AD1848 - this is correct. The opl3sa2 is an AD1848 compatible device and an MPU401 compatible device (and some other oddments).

Quoted 2 lines

What's strange is that 2 mixers seem to get loaded. The first is for a CS4??? (can't recall the exact

CS4232 - that mixer shouldnt be getting created. That is a bug. I'll take a look at it

#2 lore raw

BTW, this is with kernel 2.4.9, but it has been happening with every 2.4 kernel I've tried on these notebooks. I haven't tried 2.2 kernels in so long I can't remember if they acted the same or not.

Alex

Quoted 19 lines · --- Alan Cox
Quoted 1 line

sound works, but an extra mixer seems to always

load.

Quoted 1 line

I always suspected t was because of code sharing

or

Quoted 1 line

somthing, but I thought I'd ask here to see if it

was

Quoted 1 line

a bug or just a quirk of the driver. I don't have

the

Quoted 1 line

notebook on hand right, now do these are from

memory.

Quoted 1 line

When I load sound, several modules get loaded,

opl3sa2

Quoted 1 line

and AD18?? (can't remember the number off hand).

AD1848 - this is correct. The opl3sa2 is an AD1848 compatible device
and an MPU401 compatible device (and some other oddments).

Quoted 7 lines
Quoted 1 line

What's strange is that 2 mixers seem to get

loaded.

Quoted 1 line

The first is for a CS4??? (can't recall the exact

CS4232 - that mixer shouldnt be getting created.
That is a bug. I'll take
a look at it

__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com

#3 lore raw
In reply to Alan Cox
Quoted 5 lines · Alan Cox
Quoted 2 lines

What's strange is that 2 mixers seem to get loaded. The first is for a CS4??? (can't recall the exact

CS4232 - that mixer shouldnt be getting created. That is a bug. I'll take a look at it

Please read Documentation/sound/OPL3-SA2 (the two mixers are intentional, some channels are available only on the MSS mixer, others only on the OPL3-SA2), and don't break the driver! Since the latest DMA fix finally everything works fine on my Portege 3010 (which is exactly the same as the 3020 except for a slower CPU and smaller disk).

--
Dani
...and Linux for all.

#4 lore raw
Quoted 5 lines

Please read Documentation/sound/OPL3-SA2 (the two mixers are intentional, some channels are available only on the MSS mixer, others only on the OPL3-SA2), and don't break the driver! Since the latest DMA fix finally everything works fine on my Portege 3010 (which is exactly the same as the 3020 except for a slower CPU and smaller disk).

Thanks for warning me and saving me the effort of decoding it all

#5 lore raw
Quoted 7 lines · Alan Cox
Quoted 5 lines

Please read Documentation/sound/OPL3-SA2 (the two mixers are intentional, some channels are available only on the MSS mixer, others only on the OPL3-SA2), and don't break the driver! Since the latest DMA fix finally everything works fine on my Portege 3010 (which is exactly the same as the 3020 except for a slower CPU and smaller disk).

Thanks for warning me and saving me the effort of decoding it all

I've found myself too busy at work over the last while to really look into any issues with this driver. Anyone keen on taking over as maintainer?

Scott

Signature · 4 lines
Scott Murray
SOMA Networks, Inc.
Toronto, Ontario
e-mail: [email protected]
#6 lore raw
Quoted 9 lines · Scott Murray
Quoted 6 lines · Alan Cox
Quoted 5 lines

Please read Documentation/sound/OPL3-SA2 (the two mixers are intentional, some channels are available only on the MSS mixer, others only on the OPL3-SA2), and don't break the driver! Since the latest DMA fix finally everything works fine on my Portege 3010 (which is exactly the same as the 3020 except for a slower CPU and smaller disk).

Quoted 5 lines
Quoted 1 line

Thanks for warning me and saving me the effort of decoding it all

I've found myself too busy at work over the last while to really look into any issues with this driver. Anyone keen on taking over as maintainer?

Some times ago I wanted to change the mixer part and get back to the "original" one, with a single mixer ... but as it was intentional, I left it like this.

However I think it would be a good thing to present, to the user, a single mixer. You have 1 or more soundcards and each soundcard have a single mixer that control all the volume available with this card, no ?

If Alan has not yet released a patch that changes this ... I could try to put all the controls back together ... and it will be the occasion to learn a little bit more of that "mighty and scaring kernel" :)

--

#7 lore raw
Quoted 11 lines · Jerome AUGE
Quoted 2 lines · Scott Murray

I've found myself too busy at work over the last while to really look into any issues with this driver. Anyone keen on taking over as maintainer?

Some times ago I wanted to change the mixer part and get back to the "original" one, with a single mixer ... but as it was intentional, I left it like this.

However I think it would be a good thing to present, to the user, a single mixer. You have 1 or more soundcards and each soundcard have a single mixer that control all the volume available with this card, no ?

I gave up on the idea because it seemed dumb to me to basically duplicate the MSS mixer handling that's already implemented in ad1848.c, but feel free to change it. The mixer code from opl3sa2.c in the 2.2 kernels is probably a good place to start. Remember that you have to worry about extra mixer channels on the SA3 versus the SA2.

Quoted 3 lines

If Alan has not yet released a patch that changes this ... I could try to put all the controls back together ... and it will be the occasion to learn a little bit more of that "mighty and scaring kernel" :)

Give it a shot.

Scott

Signature · 4 lines
Scott Murray
SOMA Networks, Inc.
Toronto, Ontario
e-mail: [email protected]
#8 lore raw
In reply to Alex Deucher
Quoted 3 lines · Alex Deucher

I have a toshiba portege 3020ct and a libretto 50ct with a opl3sa2 sound chips. The modules load ok and sound works, but an extra mixer seems to always load.

Yeah, I see this too, "MS Sound System (CS4231)". Toshiba Tecra
8000. 2.4.10-ac10. I will say that this is still an improvement over the "opl3sa2 doesn't work in 2.4" bit.

Joel

Signature · 7 lines
Life's Little Instruction Book #94

	"Make it a habit to do nice things for people who 
	 will never find out."

			http://www.jlbec.org/
			[email protected]