Skip to contentSkip to conversation

Low-level help needed with leds

DISCUSSION [email protected] 2 participants 2 messages Oct 30, 2001

lore
Share & tools
lore
#0 lore raw

Hello all,

I'm writing to this maillinglist as a last resort, since reading books and other peoples code didn't solve my problem, and it is on the vague boundary of userspace/kernel.

I recently got hold of a nice little piece of hardware that must be connected between the computer and the keyboard. You can program this device by sending it bytes trough the keyboard-leds.
More about this device at http://www.andywarne.pwp.blueyonder.co.uk/,
the device is called the I-Pac.

The programming protocol description I got from the maker of this hardware states this sequence.
1. Set any led combination execpt all leds on.
2. Send five times all leds on.
3. The I-Pac will send a key-down code for the 'Y' (ready to program) or 'J' (jumper set to fixed) key.

I don't get this key code back.
I was wondering if I misunderstood the way the Linux kernel sends this LEDs commands. Does it send extra led commands that I don't know about? Maybe it doesn't send twice the same led formation since it would be a logical optimisation? Honestly, I'm completely clueless by now, and digging into the Linux source code is way to complicated for me, I honestly tried but got lost in it (tasklets et all) :-(

I took the liberty of attaching a simplified version of
my programming tool. If some of the more knowledgable people here could please help me out, thanks.

Sincerely,
David Heremans

PS: I'm not subscribed to this list, I just scan the archieves and digests from time to time. So I you reply please put me in CC.
PPS: When compiling the c program I also got redefine warnings in headers, sugestions to solve these are also welcomme, the include list I use is a mix of other example programs, so I'm not sure which are the exact ones to use.

#1 lore raw

Hi david.heremans!

I browsed through linux/drivers/char/pc_keyb.c and linux/drivers/keyboard.c and it doesn't seem like it's caching sets/gets. I quickly browsed through your code, but I didn't really look for errors. Instead, I hacked a quick program for you which does exactly what you want. I don't have an ipac, but I tested it on my PC (just pressed the keys, etc.) and it should work. If it doesn't you should check the datasheet and see whether there shouldn't be any delays between settings the leds.

PS: The program is attached

Quoted 41 lines

I'm writing to this maillinglist as a last resort, since reading books and other peoples code didn't solve my problem, and it is on the vague boundary of userspace/kernel.

I recently got hold of a nice little piece of hardware that must be connected between the computer and the keyboard. You can program this device by sending it bytes trough the keyboard-leds.
More about this device at http://www.andywarne.pwp.blueyonder.co.uk/,
the device is called the I-Pac.

The programming protocol description I got from the maker of this hardware states this sequence.
1. Set any led combination execpt all leds on.
2. Send five times all leds on.
3. The I-Pac will send a key-down code for the 'Y' (ready to program) or 'J' (jumper set to fixed) key.

I don't get this key code back.
I was wondering if I misunderstood the way the Linux kernel sends this LEDs commands. Does it send extra led commands that I don't know about? Maybe it doesn't send twice the same led formation since it would be a logical optimisation? Honestly, I'm completely clueless by now, and digging into the Linux source code is way to complicated for me, I honestly tried but got lost in it (tasklets et all) :-(

I took the liberty of attaching a simplified version of
my programming tool. If some of the more knowledgable people here could please help me out, thanks.

Sincerely,
David Heremans

PS: I'm not subscribed to this list, I just scan the archieves and digests from time to time. So I you reply please put me in CC.
PPS: When compiling the c program I also got redefine warnings in headers, sugestions to solve these are also welcomme, the include list I use is a mix of other example programs, so I'm not sure which are the exact ones to use.

(quoted diff) +0 -2
-rw-r--r-- david/david    3131 2001-10-16 09:47:33 console-lib-program-ipac.inc
-rw------- david/david    3491 2001-10-16 22:28:02 program-ipac.c
Signature · 16 lines
Regards
 Abraham

Work is the crab grass in the lawn of life.
		-- Schulz

__________________________________________________________
 Abraham vd Merwe - 2d3D, Inc.

 Device Driver Development, Outsourcing, Embedded Systems

  Cell: +27 82 565 4451         Snailmail:
   Tel: +27 21 761 7549            Block C, Antree Park
   Fax: +27 21 761 7648            Doncaster Road
 Email: [email protected]         Kenilworth, 7700
  Http: http://www.2d3d.com        South Africa