Skip to contentSkip to conversation

disk write cache and poweroff

DISCUSSION Miquel van Smoorenburg 2 participants 2 messages Nov 12, 2001

lore
Share & tools
lore
#0 lore raw

Hello Andre,

A few users of the debian sysvinit package have complained that on their laptop, shutdown + poweroff is too fast. The disk is turned off before the write-cache on the disk is completely written, resulting in some filesystem corruption.

After some experimentation with turning off the write cache before shutdown etc, I found out that a side-effect of putting the IDE disk in standby mode is that the write cache is flushed. So now halt(8) has an extra option to put all IDE disks it can find (through /proc/ide/hd*) in standby mode just before it calls reboot(LINUX_REBOOT_CMD_POWER_OFF). Thus flag is used in the /etc/rc0.d/S90halt script, and appears to fix the problem. I think windows does the same :|

Anyway this should probably be done in the kernel. Perhaps the IDE driver should register a reboot notifier with register_reboot_notifier() that puts all IDE disks on the system in standby mode on SYS_HALT and SYS_POWER_OFF ?

Many other drivers do this too, grep for SYS_HALT in linux/drivers/*/*.c

Hmm I just noticed that a lot of driver check for SYS_DOWN (which is the same as SYS_RESTART: reboot) and SYS_HALT but not for SYS_POWEROFF, which is a bug in those drivers. Ugh.

Mike.

Signature · 2 lines
"Only two things are infinite, the universe and human stupidity,
 and I'm not sure about the former" -- Albert Einstein.
#1 lore raw

Miquel,

Please use the latest patches found at www.linuxdiskcert.org.

Cheers,

Andre Hedrick
CEO/President, LAD Storage Consulting Group
Linux ATA Development
Linux Disk Certification Project

Quoted 32 lines · Miquel van Smoorenburg

Hello Andre,

A few users of the debian sysvinit package have complained that on their laptop, shutdown + poweroff is too fast. The disk is turned off before the write-cache on the disk is completely written, resulting in some filesystem corruption.

After some experimentation with turning off the write cache before shutdown etc, I found out that a side-effect of putting the IDE disk in standby mode is that the write cache is flushed. So now halt(8) has an extra option to put all IDE disks it can find (through /proc/ide/hd*) in standby mode just before it calls reboot(LINUX_REBOOT_CMD_POWER_OFF). Thus flag is used in the /etc/rc0.d/S90halt script, and appears to fix the problem. I think windows does the same :|

Anyway this should probably be done in the kernel. Perhaps the IDE driver should register a reboot notifier with register_reboot_notifier() that puts all IDE disks on the system in standby mode on SYS_HALT and SYS_POWER_OFF ?

Many other drivers do this too, grep for SYS_HALT in linux/drivers/*/*.c

Hmm I just noticed that a lot of driver check for SYS_DOWN (which is the same as SYS_RESTART: reboot) and SYS_HALT but not for SYS_POWEROFF, which is a bug in those drivers. Ugh.

Mike.

Signature · 2 lines
"Only two things are infinite, the universe and human stupidity,
 and I'm not sure about the former" -- Albert Einstein.