Skip to contentSkip to conversation

st.c SCSI Tape ioctl() bug

DISCUSSION Jeff V. Merkey 3 participants 3 messages Nov 19, 2001 – Nov 21, 2001

lore
Share & tools
lore
#0 lore raw

Kai/Linux,

The ioctl() function to enable/disable code 15 comrpession has some problems. I have a fix to the code, but it does not always seem to work properly, so I think you should do this review.

If you call the ioctl() tape command from kernel space to enable and disable **DEFAULT** compression (not MTCOMPRESSION ioctl, the MT_ST_DEF_COMPRESSION code path) there is a case where the default_compression/compression_changed flags can horribly out of sync.

Please take a look at this code. We have gotten around it by simply calling MTCOMPRESSION everytime we need to use it, however, but the other path seems busted, and it would be nice for it to work properly.

Thanks,

Jeff

#1 lore raw
Quoted 15 lines · Jeff V. Merkey

Kai/Linux,

The ioctl() function to enable/disable code 15 comrpession has some problems. I have a fix to the code, but it does not always seem to work properly, so I think you should do this review.

If you call the ioctl() tape command from kernel space to enable and disable **DEFAULT** compression (not MTCOMPRESSION ioctl, the MT_ST_DEF_COMPRESSION code path) there is a case where the default_compression/compression_changed flags can horribly out of sync.

Quoted 5 lines

Please take a look at this code. We have gotten around it by simply calling MTCOMPRESSION everytime we need to use it, however, but the other path seems busted, and it would be nice for it to work properly.

The default compression is meant to be set only at system startup/module loading. If the user wants to change the compression at any other time, using MTCOMPRESSION is the correct way.

However, I agree that setting the default compression at any other time should also give the expected result. Currently, the compression default will be enforced when a new tape is inserted. It might be better to change the compression immediately after the default has been changed if the drive is ready. This should also synchronize the compression_changed flag. I will think about this a little more and then make the changes.

Kai

#2 lore raw

Thanks Kai. You may want to check the default settings of these flags. We did notice that for whatever reaosn, when theyn get out of sync it's related ot this problem. However, the fix I did to the code appeared to cause breakage of other areas. Clearly a task better left to you.

Jeff

----- Original Message -----
From: "Kai Makisara" <[email protected]>
To: "Jeff V. Merkey" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, November 21, 2001 2:58 PM
Subject: Re: st.c SCSI Tape ioctl() bug

Quoted 35 lines · Jeff V. Merkey
Quoted 16 lines

Kai/Linux,

The ioctl() function to enable/disable code 15 comrpession has some problems. I have a fix to the code, but it does not always seem to work properly, so I think you should do this review.

If you call the ioctl() tape command from kernel space to enable and disable **DEFAULT** compression (not MTCOMPRESSION ioctl, the MT_ST_DEF_COMPRESSION code path) there is a case where the default_compression/compression_changed flags can horribly out of sync.

Quoted 5 lines

Please take a look at this code. We have gotten around it by simply calling MTCOMPRESSION everytime we need to use it, however, but the other path seems busted, and it would be nice for it to work properly.

The default compression is meant to be set only at system startup/module loading. If the user wants to change the compression at any other time, using MTCOMPRESSION is the correct way.

However, I agree that setting the default compression at any other time should also give the expected result. Currently, the compression default will be enforced when a new tape is inserted. It might be better to change the compression immediately after the default has been changed if the drive is ready. This should also synchronize the compression_changed flag. I will think about this a little more and then make the changes.

Kai