Skip to contentSkip to conversation

built-in USB /proc bug

DISCUSSION Daniel I. Applebaum 2 participants 2 messages Nov 20, 2001

lore
Share & tools
lore
#0 lore raw

I tried building a 2.4.13 kernel with USB support as built-in, instead of modules. The system worked, and USB devices worked, but there were no entries in /proc/bus/usb Yes, I had enabled both /proc filesystem and USB /proc filesystem support. When the same kernel was built but with USB support as modules, the /proc/bus/usb entries appear.

Although no expert in these matters, I suspect that when the USB subsystem is built-in, it is initialized before /proc is mounted, and the USB /proc filesystem support either turns itself off or puts the "files" elsewhere.

A viable solution might be to have make menuconfig warn against this combination.

Dan.

#1 lore raw
Quoted 7 lines · Daniel I. Applebaum

I tried building a 2.4.13 kernel with USB support as built-in, instead of modules. The system worked, and USB devices worked, but there were no entries in /proc/bus/usb Yes, I had enabled both /proc filesystem and USB /proc filesystem support. When the same kernel was built but with USB support as modules, the /proc/bus/usb entries appear.

Quoted 7 lines

Although no expert in these matters, I suspect that when the USB subsystem is built-in, it is initialized before /proc is mounted, and the USB /proc filesystem support either turns itself off or puts the "files" elsewhere.

A viable solution might be to have make menuconfig warn against this combination.

The problem is likely that it's a filesystem and you need to mount it after loading the module.

Try running:

mount /proc/bus/usb

JE