No recording on maestro3 (hp omnibook xe3)
Hi!
When I do cat /dev/dsp, I get no data, and
Nov 24 00:31:55 amd kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 0 swptr 0 Nov 24 00:31:58 amd last message repeated 3 times
in the log. Is there way to help me? linux 2.4.14
Pavel
Signature · 1 line
<sig in construction>
Quoted 6 lines · Pavel Machek
When I do cat
/dev/dsp, I get no data, andNov 24 00:31:55 amd kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 0 swptr 0 Nov 24 00:31:58 amd last message repeated 3 timesin the log. Is there way to help me? linux 2.4.14
Well my maestro3 works fine recording; cat /dev/dsp gives lots of rubbish. I have however noticed that on odd occasion it just stops working (no playing or nothing.. totally dead) and a reboot is required to get functionality back. Anyone had this problem before?
This is the maestro3 from the Inspiron 8100. Here is the relevant data:
maestro3: version 1.22 built at 20:12:16 Nov 13 2001
PCI: Found IRQ 5 for device 02:03.0
maestro3: Configuring ESS Maestro3(i) found at IO 0xEC00 IRQ 5
maestro3: subvendor id: 0x00e61028
Sep 30 23:32:31 jaded kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 19808 swptr 19808 Sep 30 23:32:32 jaded kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 19808 swptr 19808
Cheers,
Patrick
Quoted 7 lines · Patrick Cole
Well my maestro3 works fine recording; cat
/dev/dspgives lots of rubbish. I have however noticed that on odd occasion it just stops working (no playing or nothing.. totally dead) and a reboot is required to get functionality back. Anyone had this problem before?This is the maestro3 from the Inspiron 8100. Here is the relevant data:
Quoted 7 lines
maestro3: version 1.22 built at 20:12:16 Nov 13 2001
PCI: Found IRQ 5 for device 02:03.0
maestro3: Configuring ESS Maestro3(i) found at IO0xEC00IRQ 5
maestro3: subvendor id:0x00e61028Sep 30 23:32:31 jaded kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 19808 swptr 19808 Sep 30 23:32:32 jaded kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 19808 swptr 19808
I've just been given a 8100 by my employers, it works well with 2.4.15-pre9. I compile the maestro3 driver as a module so if there's a problem I can rmmod it and insmod it. So, far apart from the broken ACPI stuff, it all seems to work well.
Signature · 3 lines
Broken hearted, but not down. http://www.tahallah.demon.co.uk
Hi!
Quoted 11 lines
Quoted 6 lines
When I do cat
/dev/dsp, I get no data, andNov 24 00:31:55 amd kernel: read: chip lockup? dmasz 65536 fragsz 64 count 0 hwptr 0 swptr 0 Nov 24 00:31:58 amd last message repeated 3 timesin the log. Is there way to help me? linux 2.4.14
Well my maestro3 works fine recording; cat
/dev/dspgives lots of rubbish. I have however noticed that on odd occasion it just stops working (no playing or nothing.. totally dead) and a reboot is required to get functionality back. Anyone had this problem before?
Yes, After few tries even recording stopped for me :-(. Reboot and all okay
Pavel
Signature · 2 lines
Casualities in World Trade Center: 6453 dead inside the building, cryptography in U.S.A. and free speech in Czech Republic.