two minor c3k bugs
A message that is not in the archive (sent off-list or not yet received): [email protected]
Forwarded to the list, since it may be of interest for others too:
Quoted 1 line · Grant Grundler
Hi helge!
Hi Grant,
Quoted 7 lines
It's totally cool that I can shutdown the c3k with just power button! playing with 2.4.16-pa5 today I noticed to really minor bugs.
1) LCD shows "Linux 2.4.1-pa5" in the top line.UTS_RELEASEis definitely 2.4.16 since uname -a prints that too. It wasn't obvious to me where the "6" was getting lost. I only looked atled.cfor a bit - just enough to understand thatUTS_RELEASEwas used to generate the string.
Hmm, I still have 2.4.16-pa4 here and it definately shows "2.4.16-pa4" for me. Maybe a SMP problem ?
You could try to double the size of the udelay() parameter in lcd_print to see if it cures your problem.
Quoted 4 lines
2) When powering off with poweroff button, the last msg is "Restarting ...". Are we running the wrong event chain? I haven't had a chance to look at this yet. (reviewing code for bame and dug up the DIAG register access code.)
Currently I use "kill_proc(1, SIGINT, 0);" to kill the init-process - which is normally a reboot-command and gives the above messages. That's AFAICS not the right solution, but nfortunately I don't know how to do it correct right now.
The other thing is, that this call will not work if the init-process doesn't has PID 1 - this happened to me after a kernel crash, where init needed to fsck.
Quoted 2 lines
thanks!
grant
Greetings,
Helge