Skip to contentSkip to conversation

AIC7850 panic (post 2.4.14)

DISCUSSION J.P. Morris 1 participant 1 message Dec 15, 2001

lore
Share & tools
lore
#0 lore raw

Here's a more blatant problem with SCSI in 2.4.16 that still exists in 17-rc1. As an RC it is probably too late to fix for '17, but whatever.

(This may have been introduced in 2.4.15, I haven't yet checked)

This problem is that th kernel panics on boot as soon as it reaches the AIC7xxx module, which is loaded at the end (i.e. not built in).

This only happens from cold; when the machine is rebooted it will initialise the SCSI card successfully.. just never on the first attempt. The aic7xxx_old driver works.

Barring transcription errors, here are the details:

SCSI 0:1:0 attempting to queue an abort message scsi0 dumping card state in data_out phase at SEQADDR 0x0 ACCUM = 0x0 SINDEX=0x0 DINDEX=0x0 ARG_2=0x0 HCNT = 0x0 SCSISEQ=0x0 SBLKCTL=0xc0
DFCNTRL = 0x0 SCSISIGI = 0x0 SXFRCTL0=0x0 SSTAT0 = 0x0 SSTAT1 = 0x8
STACK = 0x0 0x0 0x0 0x0
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 0
QINFIFO entries: 3 2
waiting queue entries = 0:255 1:255 2:255 disconnected queue entries = 0:255 1:255 2:255 QOUTFIFO entries:
sequencer free SCB list: 0 1 2
Pending list: 2
Kernel Free SCB list: 1 2
Untagged Q(1): 2
Dev Q(0:1:0) 0 waiting
qinpos = 0, SCB index = 3
Kernel Panic: Loop 1

Signature · 5 lines
JP Morris - aka DOUG the Eagle (Dragon) -=UDIC=-  [email protected]
Fun things to do with the Ultima games            http://www.it-he.org
Developing a U6/U7 clone                          http://ire.it-he.org
d+++ e+ N+ T++ Om U1234!56!7'!S'!8!9!KA u++ uC+++ uF+++ uG---- uLB----
uA--- nC+ nR---- nH+++ nP++ nI nPT nS nT wM- wC- y a(YEAR - 1976)