Skip to contentSkip to conversation

2.4.16 with es1370 pci

DISCUSSION Wakko Warner 1 participant 1 message Dec 31, 2001

lore
Share & tools
lore
#0 lore raw

Wrong address I sent this too.

----- Forwarded message from Wakko Warner <wakko> -----

Date: Mon, 31 Dec 2001 12:24:40 -0500
From: Wakko Warner <wakko>
To: Pierre Rousselet <[email protected]>,
[email protected]
Cc: [email protected]
Subject: Re: 2.4.16 with es1370 pci
Message-ID: <[email protected]>
In-Reply-To: <[email protected]> <[email protected]>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.95.3i
In-Reply-To: <[email protected]>; from Pierre Rousselet on Mon, Dec 31, 2001 at 02:19:10PM +0100
Status: RO
Content-Length: 1634
Lines: 50

Quoted 4 lines · Pierre Rousselet
Quoted 2 lines · Wakko Warner

Here's part of an strace:

Quoted 8 lines
Quoted 6 lines

open("/dev/dsp", O_WRONLY) = 4
ioctl(4, SNDCTL_DSP_GETBLKSIZE, 0x806ae1c) = 0
ioctl(4, SNDCTL_DSP_RESET, 0) = 0
ioctl(4, SOUND_PCM_READ_BITS, 0xbffff880) = 0
ioctl(4, SNDCTL_DSP_STEREO, 0xbffff87c) = 0
ioctl(4, SOUND_PCM_READ_RATE, 0xbffff878) = 0

Which sound player are you stracing? vplay?

This was mpg123 v0.59q. However, no player works (xmms, sound under wine, bplay...)

Quoted 4 lines
Quoted 1 line

The only thing I can see is the fact it's on IRQ 15 with the usb

controller.

It is correct. Is local APIC enabled ? What is plugged in the usb port ?

I assume so since this is a dual CPU machine. Alan mentioned something about unloading the usb modules, I don't even use them and haven't since this machine was booted.

Quoted 5 lines
Quoted 1 line

I honestly don't know why I'm doing this, as no message I ever post

gets answered.

Your sound card is dead, change it. Or give us more info about your sound sofware.

Soundcard is fine, reboot takes care of it (no reset, no power off, just reboot) I didn't notice this with 2.2.19 or 2.2.13 (I had 2.2.13 up for 423 days w/o problems on this machine with this card.)

System:
tyan s1832dl board
2 pII 450 cpus
4 128mb pc100 sticks (EEPROM /w SPD)
Matrox g400max dual (was a g200 before when I used 2.2.20) 3com 3c905a
Adaptec aha-2940U/UW dual channel
Soundblaster PCI 64 (ES1370 which is having the problem) Zoom 28.8k ISA modem (IRQ 9 IO 0x02E8) Soundblaster 16 ISA (IRQ 7 IO 0x0220)

Signature · 5 lines
 Lab tests show that use of micro$oft causes cancer in lab animals

----- End forwarded message -----
-- 
 Lab tests show that use of micro$oft causes cancer in lab animals