i810 TCO ?!
Hi,
I would like to use i810 watchdog module (i810-tco).
Upon modprobing I get ->
kernel: i810 TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
what should I do now ?
- add some options to insmod ?
- change some option in BIOS (I can't pinpoint any)
- change some jumper onboard ?
- apply some patch ?
driver is 0.03 posted on this list in Oct last year. Kernel is latest 2.4.x (currently 18-pre4).
lspci ->
# lspci 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801BAM PCI (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (ICH2) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 02) 00:1f.2 USB Controller: Intel Corporation 82801BA(M) USB (Hub A) (rev 02) 00:1f.3 SMBus: Intel Corporation 82801BA(M) SMBus (rev 02) 00:1f.4 USB Controller: Intel Corporation 82801BA(M) USB (Hub B) (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA(M) AC'97 Audio (rev 02) 01:08.0 Ethernet controller: Intel Corporation 82801BA(M) Ethernet (rev 01)
any other information available on request,
TIA,
Signature · 3 lines
Mario Mikočević (Mozgy) mozgy at hinet dot hr My favourite FUBAR ...
Quoted 7 lines · Mario Mikocevic
Hi,
I would like to use i810 watchdog module (i810-tco).
Upon modprobing I get ->
kernel: i810 TCO timer: failed to reset
NO_REBOOTflag, reboot disabled by hardware
Your motherboard is crap (sorry), it is has some magic ICH pin wired to ground and so TCO timer is disabled.
Quoted 5 lines
what should I do now ?
- add some options to insmod ?
- change some option in BIOS (I can't pinpoint any)
No.
Quoted 1 line
- change some jumper onboard ?
It is theoreticaly possible.
Quoted 1 line
- apply some patch ?
You can only patch your motherboard ;)
Quoted 24 lines
driver is 0.03 posted on this list in Oct last year. Kernel is latest 2.4.x (currently 18-pre4).
lspci ->
# lspci 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801BAM PCI (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (ICH2) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 02) 00:1f.2 USB Controller: Intel Corporation 82801BA(M) USB (Hub A) (rev 02) 00:1f.3 SMBus: Intel Corporation 82801BA(M) SMBus (rev 02) 00:1f.4 USB Controller: Intel Corporation 82801BA(M) USB (Hub B) (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA(M) AC'97 Audio (rev 02) 01:08.0 Ethernet controller: Intel Corporation 82801BA(M) Ethernet (rev 01)any other information available on request,
TIA,
Signature · 2 lines
Andrey Panin | Embedded systems software engineer [email protected] | PGP key: wwwkeys.eu.pgp.net