typo in i386 machine check code

Our old PIII Xeons are dying, as shown by more frequent panics due to bad hardware:

    kernel: CPU 3: Machine Check Exception: 0000000000000007 
    kernel: Bank 0: b678600022000800 at 3678600022000800 

The part after the "at" is supposed to be the memory address which was being accessed when the fault was detected. Instead the code prints out the status field again (with the high bit removed for no apparent reason).

Patch is against 2.5.2.

		-- Pete

@@ -40,21 +40,21 @@ static void intel_machine_check(struct p
 			high&=~(1<<31);
 			if(high&(1<<27))
 			{
 				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
 				printk("[%08x%08x]", alow, ahigh);
 			}
 			if(high&(1<<26))
 			{
 				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
 				printk(" at %08x%08x", 
-					high, low);
+					ahigh, alow);
 			}
 			printk("\n");
 			/* Clear it */
 			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
 			/* Serialize */
 			wmb();
 		}
 	}
 	
 	if(recover&2)

Patch is correct. I pushed the same fix to Marcelo & Linus about a month back. Alan, 2.2 also needs this. (Can't remember if I told you, or you told me 8-)

| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs

You know where to send the diff

It was previous message in this thread 8-)
Bounced it your way again just in case..

| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs