Q: use of new modules in old kernel
Hi,
how is it possible to use modules of newer kernels in an old kernel system?
To use new drivers, we want not recompile the kernel.
I tried to load the module 8139too from 2.4.17 into a 2.4.9 kernel with modprobe, but there are many unresolved symbols.
The flag "Set version information on all module symbols" is set.
TIA for all information, hyperlinks are welcome too,
Tobias
Signature · 4 lines
Tobias Wollgam * Softwaredevelopment * Business Unit Information MATERNA GmbH Information & Communications Vosskuhle 37 * 44141 Dortmund http://www.materna.de
Quoted 7 lines · Tobias Wollgam
Hi,
how is it possible to use modules of newer kernels in an old kernel system?
To use new drivers, we want not recompile the kernel.
Quoted 9 lines
I tried to load the module 8139too from 2.4.17 into a 2.4.9 kernel with modprobe, but there are many unresolved symbols.
The flag "Set version information on all module symbols" is set.
TIA for all information, hyperlinks are welcome too,
Tobias
<short version>
What worked for me (see later), is moving the newer module and appropriate includes across to the older kernel and performing a make modules && make modules_install.
<long version>
This worked for me when using a patched nm256_audio and ac97 module to get my sound working. I couldn't get the patch to apply properly to the whole kernel, so I nicked those files I knew were needed and moved them over to a clean kernel. hope this helps, and yeh, I've got no idea if this will work for you. I would first try copying the 8139too.c from drivers/net to the 2.4.9 kernel, and if you've already setup your config you should just be able to make modules and then insmod (with luck).
Quoted 10 lines
Signature · 9 lines
Tobias Wollgam * Softwaredevelopment * Business Unit Information MATERNA GmbH Information & Communications Vosskuhle 37 * 44141 Dortmund http://www.materna.de - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
NyQuist | Matthew Hall -- NyQuist at ntlworld dot com Sig: Microsoft sells you Windows. Linux gives you the whole house.
Quoted 9 lines · Tobias Wollgam
how is it possible to use modules of newer kernels in an old kernel system?
To use new drivers, we want not recompile the kernel.
I tried to load the module 8139too from 2.4.17 into a 2.4.9 kernel with modprobe, but there are many unresolved symbols.
The flag "Set version information on all module symbols" is set.
Note that you will basically never be able to just move the compiled module from one kernel version to another and expect it to work. At the very minimum you should copy the needed files from the new kernel source into the old kernel source and recompile. Practically, this may also not work (depending on the driver and the kernel) because while there is often backwards compatibility in newer kernels, the newer driver code may not compile (properly) with the older kernel (it depends on what part of the kernel the driver is in, though).
Cheers, Andreas
--
Andreas Dilger
http://sourceforge.net/projects/ext2resize/
http://www-mddsp.enel.ucalgary.ca/People/adilger/