Skip to contentSkip to conversation

Seagate IDE tape problems

DISCUSSION Mikael Pettersson 1 participant 1 message Feb 21, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 8 lines · Magnus Stenman

I'm having trouble with a Seagate IDE tape drive that previously worked with 2.2.x kernels. (tape is a STT8000A travan drive)

The box has an ABIT m/b with intel 815 chipset.

On 2.2 I used the ide tape modules which let me access the drive on ht0, but that did not work at all on 2.4.x.

Quoted 6 lines

I'm now using scsi_mod, ide-scsi and st and it seems to mostly work. However, sometimes backups fail, and I always get a couple of error messages every backup.

Linux version 2.4.9-21 ([email protected]) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.\

i.e., a RH7.2 update kernel, not a standard kernel

Quoted 8 lines

96-98)) #1 Thu Jan 17 14:16:30 EST 2002
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 17
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA

Quoted 8 lines

hda: SAMSUNG SV2042H, ATA DISK drive
hdc: SAMSUNG SV3063H, ATA DISK drive
hdd: Seagate STT8000A, ATAPI TAPE drive
...
hdd: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
hdd: status error: error=0x7f
hdd: DMA disabled

FWIW, I have an identical unit (STT8000A) and it has worked perfectly for me up to 2.4.18-pre, on 440BX and 850 chipset boxes. I don't use scsi emulation for it, just the regular ide-tape driver, and I don't have a hard drive on the same channel (it's hdd with hdc being a HP CD-writer).

/Mikael