floppy in 2.4.17
Hi.
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -t ext2 /dev/fd0 just hangs forever.
mkfs -v -t ext2 /dev/fd0 gives:
mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count - /dev/fd0
Hardware:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97.sv
???
TIA
Signature · 4 lines
J.A. Magallon # Let the source be with you... mailto:[email protected] Mandrake Linux release 8.2 (Cooker) for i586 Linux werewolf 2.4.17 #2 SMP Sat Feb 23 15:08:17 CET 2002 i686
Hello J.A. , Nice name . I have verified that the floppy drive under 2.4.18-pre3 is in the same shape . Hth , JimL
# fdformat /dev/fd0u1440 , Hmmm , Move little tab . /dev/fd0u1440: Read-only file system # fdformat /dev/fd0u1440 , Hmmm ...... /dev/fd0u1440: Read-only file system # tar -ztvf /dev/fd0 , Hmmm , J.A.'s right . (hang ..wait several minutes..)^C tar (grandchild): Read error on /dev/fd0: Input/output error tar (grandchild): At beginning of tape, quitting now tar (grandchild): Error is not recoverable: exiting now
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error exit delayed from previous errors
Quoted 21 lines · J.A. Magallon
Hi.
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -t ext2
/dev/fd0just hangs forever.mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0Hardware:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97.sv???
Quoted 7 lines
TIA
--
J.A. Magallon # Let the source be with you...
mailto:[email protected]
Mandrake Linux release 8.2 (Cooker) for i586
Linux werewolf 2.4.17 #2 SMP Sat Feb 23 15:08:17 CET 2002 i686
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | P.O. Box 854 | Give me Linux |
| [email protected] | Coudersport PA 16915 | only on AXP |
+------------------------------------------------------------------+Hello All , More info ... Hth , JimL
Quoted 13 lines · Mr. James W. Laferriere
Hello J.A. , Nice name . I have verified that the floppy drive under 2.4.18-pre3 is in the same shape . Hth , JimL
# fdformat /dev/fd0u1440 , Hmmm , Move little tab . /dev/fd0u1440: Read-only file system # fdformat /dev/fd0u1440 , Hmmm ...... /dev/fd0u1440: Read-only file system # tar -ztvf /dev/fd0 , Hmmm , J.A.'s right . (hang ..wait several minutes..)^C tar (grandchild): Read error on /dev/fd0: Input/output error tar (grandchild): At beginning of tape, quitting now tar (grandchild): Error is not recoverable: exiting now
Quoted 3 lines
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error exit delayed from previous errors
VFS: Disk change detected on device fd(2,28)
VFS: Disk change detected on device fd(2,28)
VFS: Disk change detected on device fd(2,28)
VFS: Disk change detected on device fd(2,28)
VFS: Disk change detected on device fd(2,0)end_request: I/O error, dev 02:00 (floppy), sector 0end_request: I/O error, dev 02:00 (floppy), sector 0end_request: I/O error, dev 02:00 (floppy), sector 2end_request: I/O error, dev 02:00 (floppy), sector 4end_request: I/O error, dev 02:00 (floppy), sector 6
Quoted 17 lines · J.A. Magallon
Quoted 16 lines
Hi.
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -t ext2
/dev/fd0just hangs forever.mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0Hardware:
Quoted 7 lines
Quoted 7 lines
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97.sv???
TIA
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | P.O. Box 854 | Give me Linux |
| [email protected] | Coudersport PA 16915 | only on AXP |
+------------------------------------------------------------------+Have you tried booting with "pnpbios=no-res" ?
Quoted 23 lines · Mr. James W. Laferriere
Hello All , More info ... Hth , JimL
Quoted 14 lines · Mr. James W. Laferriere
Hello J.A. , Nice name . I have verified that the floppy drive under 2.4.18-pre3 is in the same shape . Hth , JimL
# fdformat /dev/fd0u1440 , Hmmm , Move little tab . /dev/fd0u1440: Read-only file system # fdformat /dev/fd0u1440 , Hmmm ...... /dev/fd0u1440: Read-only file system # tar -ztvf /dev/fd0 , Hmmm , J.A.'s right . (hang ..wait several minutes..)^C tar (grandchild): Read error on /dev/fd0: Input/output error tar (grandchild): At beginning of tape, quitting now tar (grandchild): Error is not recoverable: exiting nowQuoted 4 lines
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error exit delayed from previous errors
Quoted 39 lines
VFS: Disk change detected on device
fd(2,28)
VFS: Disk change detected on devicefd(2,28)
VFS: Disk change detected on devicefd(2,28)
VFS: Disk change detected on devicefd(2,28)
VFS: Disk change detected on devicefd(2,0)end_request: I/O error, dev 02:00 (floppy), sector 0end_request: I/O error, dev 02:00 (floppy), sector 0end_request: I/O error, dev 02:00 (floppy), sector 2end_request: I/O error, dev 02:00 (floppy), sector 4end_request: I/O error, dev 02:00 (floppy), sector 6Quoted 26 lines · J.A. Magallon
Quoted 25 lines
Hi.
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -t ext2
/dev/fd0just hangs forever.mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0Hardware:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97.sv???
TIA
Pierre
Signature · 3 lines
------------------------------------------------ Pierre Rousselet <[email protected]> ------------------------------------------------
Hello Pierre , pnp is completely disabled in my kernel .
Hth , JimL
# grep -i pnp /usr/src/linux/.config
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
# CONFIG_IP_PNP is not set
# CONFIG_BLK_DEV_ISAPNP is not set
Quoted 70 lines · Pierre Rousselet
Have you tried booting with "pnpbios=no-res" ?
Quoted 23 lines · Mr. James W. Laferriere
Hello All , More info ... Hth , JimL
Quoted 14 lines · Mr. James W. Laferriere
Hello J.A. , Nice name . I have verified that the floppy drive under 2.4.18-pre3 is in the same shape . Hth , JimL
# fdformat /dev/fd0u1440 , Hmmm , Move little tab . /dev/fd0u1440: Read-only file system # fdformat /dev/fd0u1440 , Hmmm ...... /dev/fd0u1440: Read-only file system # tar -ztvf /dev/fd0 , Hmmm , J.A.'s right . (hang ..wait several minutes..)^C tar (grandchild): Read error on /dev/fd0: Input/output error tar (grandchild): At beginning of tape, quitting now tar (grandchild): Error is not recoverable: exiting nowQuoted 4 lines
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error exit delayed from previous errorsQuoted 39 lines
VFS: Disk change detected on device
fd(2,28)
VFS: Disk change detected on devicefd(2,28)
VFS: Disk change detected on devicefd(2,28)
VFS: Disk change detected on devicefd(2,28)
VFS: Disk change detected on devicefd(2,0)end_request: I/O error, dev 02:00 (floppy), sector 0end_request: I/O error, dev 02:00 (floppy), sector 0end_request: I/O error, dev 02:00 (floppy), sector 2end_request: I/O error, dev 02:00 (floppy), sector 4end_request: I/O error, dev 02:00 (floppy), sector 6Quoted 26 lines · J.A. Magallon
Quoted 25 lines
Hi.
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -t ext2
/dev/fd0just hangs forever.mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0Hardware:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97.sv???
TIA
Quoted 6 lines
Pierre
--
------------------------------------------------
Pierre Rousselet <[email protected]>
------------------------------------------------
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | P.O. Box 854 | Give me Linux |
| [email protected] | Coudersport PA 16915 | only on AXP |
+------------------------------------------------------------------+Quoted 8 lines · J.A. Magallon
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0
Exactly the same thing here.
Signature · 1 line
# Heinz Diehl, 68259 Mannheim, Germany
Quoted 6 lines · Heinz Diehl
Quoted 3 lines · J.A. Magallon
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
Quoted 6 lines
Quoted 4 lines
mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0Exactly the same thing here.
Yet another meetoo.
I also experience hard lockups when writing to the floppy drive (fdformat, dd etc.) , nothing in my logs though.
... Hmm
Do you happen to have the NVidia kernel module loaded when the hangs occur? More specifically, is the module being used? From limited (fd is too sloooowwww) I can dd, fdformat etc just fine under console, with or without NVidia module loaded. If I startx during fdformat then machine will lock hard. I have to pull the power cord for a few seconds to get the box working again.
FYI:
sh-2.05# lspci
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02) 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
10)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:09.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [Mystique] (rev 03)
00:0b.0 Multimedia audio controller: Platform Technologies, Inc. AGOGO sound chip (aka ESS Maestro 1) (rev 10)
00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) 00:0f.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV15 (Geforce2 GTS) (rev a3)
Xfree86 4.2.0
NVIDIA_kernel-1.0-1251 (I know it's old but it's the only release that will give me GL with xinerama enabled)
Signature · 1 line
Chris Sykes
Quoted 12 lines · Chris Sykes
Quoted 11 lines · Heinz Diehl
Quoted 8 lines · J.A. Magallon
I am getting problems with floppy drive in 2.4.17. All started with floppy not working in 18-rc4, went back to 17 and still does not work. Just plain 2.4.17, no patching.
mkfs -v -t ext2
/dev/fd0gives:mke2fs 1.26 (3-Feb-2002)
mkfs.ext2: bad blocks count -/dev/fd0
Quoted 7 lines
Quoted 1 line
Exactly the same thing here.
Yet another meetoo.
I also experience hard lockups when writing to the floppy drive (fdformat, dd etc.) , nothing in my logs though.
I've seen this a couple times also, but not on the -ac series recently.
I notice this in 2.4.18-pre9-ac1:
o Fix floppy reservation ranges (Anton Altaparmakov)
So, can you guys stress the -ac patch to see if it's fixed there?
Mike
Quoted 1 line · Mike Fedyk
So, can you guys stress the -ac patch to see if it's fixed there?
chiara:~ # mke2fs -t ext2 /dev/fd0 mke2fs 1.24, 30-Aug-2001 for EXT2 FS Lö,
mke2fs: bad blocks count - /dev/fd0
chiara:~ # uname -a
Linux chiara 2.4.18-rc2-ac1 #1 Sun Feb 24 14:20:33 CET 2002 i586 unknown
Signature · 1 line
# Heinz Diehl, 68259 Mannheim, Germany
Quoted 7 lines · Heinz Diehl
Quoted 2 lines · Mike Fedyk
So, can you guys stress the -ac patch to see if it's fixed there?
chiara:~ # mke2fs -t ext2
/dev/fd0
# mke2fs /dev/fd0 might work better
Quoted 7 lines
mke2fs 1.24, 30-Aug-2001 for EXT2 FS Lö,
mke2fs: bad blocks count -/dev/fd0chiara:~ # uname -a
Linux chiara 2.4.18-rc2-ac1 #1 Sun Feb 24 14:20:33 CET 2002 i586 unknown
Signature · 3 lines
------------------------------------------------ Pierre Rousselet <[email protected]> ------------------------------------------------