Skip to contentSkip to conversation

IDE DMA hard lock at boot time (KT266A chpiset)

DISCUSSION Wolly 2 participants 2 messages Feb 23, 2002

lore
Share & tools
lore

Wolly

author
#0 lore raw

Hi all,

I'm using an elitegroup mobo (K7VTA3 / KT266A chipset; Athlon XP) and I'm experiencing a hard lock at boot time when configuring the kernel using `via82cxx support'. (No ctrl-alt-del, no sysrq, only hw reset)

[Without that I can boot without problems but I don't have DMA and thus disk throughput is at less than 3 Mb/sec.]

The hard lock seems to happen during the first hd access and the hd light stays on when the system is crashing.

Is that
- a known issue (hopefully not),
- a Linux kernel problem or
- do I have to blame the board (this is not completely unlikely as I also have problems with two network cards which work without problems in other boards and same kernel)

Is the KT266A chipset's DMA supported at all? (The vt82cxx driver source code lists several chipsets including KT266 but not KT266A.)

--------<Boot screen>--------
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 0:11.1. Please try using pci=biosirq
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1

    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdb:pio

hda: IBM-DTLA-xyz, ATA DISK drive
hdc: CD-xyz, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: xx sectors (30000 MB) [...], UDMA(100)
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda:_
---------------------
(hardlock occurs; cursor at `_')

Regards,
Wolly

#1 lore raw
Quoted 7 lines · Wolly

Hi all,

I'm using an elitegroup mobo (K7VTA3 / KT266A chipset; Athlon XP) and I'm experiencing a hard lock at boot time when configuring the kernel using `via82cxx support'. (No ctrl-alt-del, no sysrq, only hw reset) [...]

I have a similar hardware setup here (Soltek SL-75DRV2 with KT266A chipset + Athlon XP 1700+), and although the box boots and runs fine (even with Athlon optimizations and VIA82CXXX compiled in), from time to time the machine locks solid (no kind of response from the box, HDD light keeps on, power cicle needed).

K7 optimizations and VIA chipsets seem to be quite problematic pieces of hardware, but in my case you have to add to this a GeForce2 MX video card, with NO closed-binary nVidia drivers.

Machine freezes seems to follow the following pattern: working on X environment, watching TV (PCI TV capture card), listening to digital audio music (aka MP3 :) and some sort of disk access. A high number of freezes seem to happen when opening a medium sized mailbox in Maildir format (aproximately 800 messages/files inside). As the box has 256 MB of RAM, and the mailbox has been read before, the whole directory is maybe cached, except for newly arrived messages.

"mutt" starts reading the mailbox, and after some hundreds of messages, the box locks solid. Digital audio stops, overlaid TV capture stops, SysRq does nothing, network unresponsive. Looking at the logs shows nothing, even after having tried SysRq+everything after the lock.

The cause of all this ?. Maybe Athlon optimizations, maybe a severe flaw in the chipset and/or motherboard BIOS, maybe ALSA sound (VIA8233 sound doesn't work with OSS modules) not fine, maybe crappy nVidia-based video card....who knows. No overclocking of any kind by the way, and temperature seems to be under control.

I'll try setting AGP speed to x2 instead of x4, adding Option "NvAgp" "0" to my X 4.x configuration, disabling DRI and any kind of 3D acceleration, etc... and whatever I devise to get again a box I can trust. Damn, I should not have asked for a VIA-based board...

--
José Luis Domingo López
Linux Registered User #189436 Debian Linux Woody (P166 64 MB RAM)

jdomingo AT internautas DOT org => Spam at your own risk