OOPS: Multipath routing 2.4.17
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · Kain
I am running a mailserver on linux 2.4.17 with equal-cost multi-path routing to 2 local routers, and I am able to OOPS the machine under moderate load with the multipath route installed. Attached is a decoded OOPS log as well as my .config.
These are my log messages immediately before the OOPS:
impossible 888
divide error: 0000
They should be after, not before the oops.
What compiler are you using?
-Andi
Quoted 7 lines · Andi Kleen
Quoted 5 lines · Kain
I am running a mailserver on linux 2.4.17 with equal-cost multi-path routing to 2 local routers, and I am able to OOPS the machine under moderate load with the multipath route installed. Attached is a decoded OOPS log as well as my .config.
Quoted 8 lines
Quoted 4 lines
These are my log messages immediately before the OOPS:
impossible 888
divide error: 0000They should be after, not before the oops.
What compiler are you using?
I am compiling with debian sid gcc:
Reading specs from /usr/lib/gcc-lib/i386-linux/2.95.4/specs gcc version 2.95.4 20011006 (Debian prerelease)
Signature · 5 lines
Assassins do it from behind. ** Professional Bryon Roche, Kain <[email protected]> <[email protected]>