Skip to contentSkip to conversation

minor bug in emu10k1 + toslink

DISCUSSION Peter Surda 2 participants 2 messages Mar 11, 2002

lore
Share & tools
lore
#0 lore raw

Hi!

with driver0.9pre10 and 12, the toslink output (alsamixer calls it IEC958 Optical Raw) on my sblive! has reversed mixer settings. I.e. when I set it to mute, it sends music and when I unmute it, it is silenced. Nothing fatal but should be imho fixed in long term.

Bye,

Peter Surda (Shurdeek) <[email protected]>, ICQ 10236103, +436505122023

--
Actually, Microsoft is sort of a mixture between the Borg and the Ferengi.

#1 lore raw
Quoted 6 lines · Peter Surda

Hi!

with driver0.9pre10 and 12, the toslink output (alsamixer calls it IEC958 Optical Raw) on my sblive! has reversed mixer settings. I.e. when I set it to mute, it sends music and when I unmute it, it is silenced. Nothing fatal but should be imho fixed in long term.

It's ok. If you unmute 'RAW' switch, then you can feed raw S/PDIF stream to hw:0,3 device. It's used for AC3 stream forwarding for DVD audio. Use 'IEC958 Optical' bar to control S/PDIF out.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel