2.5.7 Documentation/scsi
Subsystems (7)
PATCH 1/1 2.5.7 Documentation/scsi
This skript'n'patch creates Documentation/scsi and moves the scsi-related documentation into. The docs are collected from Documentation/ and drivers/scsi/*.
It also does:
-kill Changelog.serverraid. It's an older copy of Changelog.ids, -fixes the references to the docs in drivers and Config.help, -renames the files from README.* to *.txt to look the same way like the other Documentation directories.
-makes some minor changes (all but one cosmetic) to the docs. The one not cosmetic is the patch to cpqfc.txt, which kills 2 lines describing how to include the driver into the kernel.
Depends on my patch to Documentation/00-INDEX!
Eike
Here comes the script:
---------------------
#!/bin/bash
mkdir Documentation/scsi
mv drivers/scsi/README.* Documentation/scsi/
rm drivers/scsi/ChangeLog.serverraid
mv drivers/scsi/ChangeLog.* Documentation/scsi/
mv drivers/scsi/LICENSE.FlashPoint Documentation/scsi/
mv drivers/scsi/aic7xxx_old/README.aic7xxx Documentation/scsi/README.aic7xxx_old mv drivers/scsi/sym53c8xx_2/ChangeLog.txt Documentation/scsi/ChangeLog.sym53c8xx_2 mv drivers/scsi/sym53c8xx_2/Documentation.txt Documentation/scsi/README.sym53c8xx_2 mv drivers/scsi/cpqfc.Readme Documentation/scsi/cpqfc.txt
mv Documentation/scsi.txt Documentation/scsi/
mv Documentation/scsi-generic.txt Documentation/scsi/
mv Documentation/README.nsp_cs.eng Documentation/scsi/NinjaSCSI.txt
cd Documentation/scsi
for i in README.*; do
mv $i echo $i| sed 's/README\.//'.txt
done
cd ../..
---------------------
Documentation/00-INDEX +2 -6
@@ -34,8 +34,6 @@ - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux README.moxa - release notes for Moxa mutiport serial card. -README.nsp_cs.eng - - info on WorkBiT NinjaSCSI-3/32Bi driver. SAK.txt - info on Secure Attention Keys. SubmittingDrivers
@@ -188,10 +186,8 @@ - directory with info on using Linux on the IBM S390. sh/ - directory with info on porting Linux to a new architecture. -scsi-generic.txt - - info on the sg driver for generic (non-disk/CD/tape) SCSI devices. -scsi.txt - - short blurb on using SCSI support as a module. +scsi/ + - directory with info on Linux scsi support. serial-console.txt - how to set up Linux with a serial line console as the default. sgi-visws.txt
Documentation/scsi/00-INDEX +66 -0
66 lines not on this page · raw message
Documentation/scsi/ChangeLog.ips +0 -1
@@ -86,4 +86,3 @@ - Fixed read/write errors when the adapter is using an 8K stripe size. -
Documentation/scsi/ChangeLog.sym53c8xx_2 +0 -4
@@ -142,7 +142,3 @@ consistent with what archs are expecting. - Use MMIO per default for Power PC instead of some fake normal IO, as Paul Mackerras stated that MMIO works fine now on this arch. - - - -
Documentation/scsi/FlashPoint.txt +1 -1
@@ -60,7 +60,7 @@ Mylex Corp. 510/796-6100 [email protected] - + ANNOUNCEMENT BusLogic FlashPoint LT/BT-948 Upgrade Program 1 February 1996
Documentation/scsi/cpqfc.txt +0 -2
@@ -91,8 +91,6 @@ using "qa_test" (esp. io_test script) suite modified from Unix tests. Installation: -copy file cpqfcTS.patch to /usr/src/linux -patch -p1 < cpqfcTS.patch make menuconfig (select SCSI low-level, Compaq FC HBA) make dep
Documentation/scsi/dtc3x80.txt +0 -2
@@ -41,5 +41,3 @@ nowhere, I give up. So.....This driver does NOT use interrupts, even if you have the card jumpered to an IRQ. Probably nobody will ever care. - -
drivers/scsi/Config.help +43 -42
252 lines not on this page · raw message
drivers/scsi/FlashPoint.c +2 -1
@@ -11,7 +11,8 @@Copyright 1995-1996 by Mylex Corporation. All Rights Reserved This file is available under both the GNU General Public License -and a BSD-style copyright; see LICENSE.FlashPoint for details. +and a BSD-style copyright; see Documentation/scsi/LICENSE.FlashPoint for +details. */
drivers/scsi/aha152x.c +2 -2
@@ -211,7 +211,7 @@* ************************************************************************** - see README.aha152x for configuration details +see Documentation/scsi/aha152x.txt for configuration details **************************************************************************/
@@ -1834,7 +1834,7 @@"aha152x: unable to verify geometry for disk with >1GB.\n" " Using default translation. Please verify yourself.\n" " Perhaps you need to enable extended translation in the driver.\n" - " See /usr/src/linux/drivers/scsi/README.aha152x for details.\n"); + " See /usr/src/linux/Documentation/scsi/aha152x.txt for details.\n"); } }else { info_array[0 ] = info[0 ];
drivers/scsi/aic7xxx/aic7xxx_linux.c +1 -1
@@ -1076,7 +1076,7 @@aic7xxx_setup (aic7xxx);if (dummy_buffer[0 ] !='P' )printk (KERN_WARNING -"aic7xxx: Please read the file /usr/src/linux/drivers/scsi/README.aic7xxx\n" +"aic7xxx: Please read the file /usr/src/linux/Documentation/scsi/aic7xxx.txt\n" "aic7xxx: to see the proper way to specify options to the aic7xxx module\n" "aic7xxx: Specifically, don't use any commas when passing arguments to\n" "aic7xxx: insmod or else it might trash certain memory areas.\n" );
drivers/scsi/aic7xxx_old.c +2 -2
@@ -9487,8 +9487,8 @@if (aic7xxx)aic7xxx_setup (aic7xxx);if (dummy_buffer[0 ] !='P' ) -printk (KERN_WARNING "aic7xxx: Please read the file /usr/src/linux/drivers" -"/scsi/README.aic7xxx\n" +printk (KERN_WARNING "aic7xxx: Please read the file /usr/src/linux" +"Documentation/scsi/aic7xxx_old.txt\n" "aic7xxx: to see the proper way to specify options to the aic7xxx " "module\n" "aic7xxx: Specifically, don't use any commas when passing arguments to\n"
drivers/scsi/dpt/dpti_ioctl.h +2 -1
@@ -5,7 +5,8 @@copyright : (C) 2001 by Adaptec email : [email protected] -See README.dpti for history, notes, license info, and credits +See Documentation/scsi/dpti.txt for history, notes, license info and +credits ***************************************************************************/ /***************************************************************************
drivers/scsi/dpt_i2o.c +2 -1
@@ -8,7 +8,8 @@July 30, 2001 First version being submitted for inclusion in the kernel. V2.4 -See README.dpti for history, notes, license info, and credits +See Documentation/scsi/dpti.txt for history, notes, license info and +credits ***************************************************************************/ /***************************************************************************
drivers/scsi/dpti.h +2 -1
@@ -5,7 +5,8 @@copyright : (C) 2001 by Adaptec email : [email protected] -See README.dpti for history, notes, license info, and credits +See Documentation/scsi/dpti.txt for history, notes, license info and +credits ***************************************************************************/ /***************************************************************************
drivers/scsi/ibmmca.c +2 -2
@@ -4,8 +4,8 @@Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU General Public License. Written by Martin Kolinek, December 1995. Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang -See the file README.ibmmca for a detailed description of this driver, -the commandline arguments and the history of its development. +See the file Documentation/scsi/ibmmca.txt for a detailed description of +this driver, the commandline arguments and the history of its development. See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest updates, info and ADF-files for adapters supported by this driver. */
drivers/scsi/ibmmca.h +4 -3
@@ -1,8 +1,9 @@/* * Low Level Driver for the IBM Microchannel SCSI Subsystem -* (Headerfile, see README.ibmmca for description of the IBM MCA SCSI-driver -* For use under the GNU General Public License within the Linux-kernel project. -* This include file works only correctly with kernel 2.4.0 or higher!!! */ +* (Headerfile, see Documentation/scsi/ibmmca.txt for description of the +* IBM MCA SCSI-driver For use under the GNU General Public License within +* the Linux-kernel project. This include file works only correctly with +* kernel 2.4.0 or higher!!! */ #ifndef _IBMMCA_H#define _IBMMCA_H
drivers/scsi/ncr53c8xx.c +1 -1
@@ -1625,7 +1625,7 @@** Possible data corruption during Memory Write and Invalidate. ** This work-around resets the addressing logic prior to the ** start of the first MOVE of a DATA IN phase. -** (See README.ncr53c8xx for more information) +** (See Documentation/scsi/ncr53c8xx.txt for more information) */ SCR_JUMPR ^IFFALSE (IF (SCR_DATA_IN )), 20,
drivers/scsi/osst.c +1 -1
@@ -1,6 +1,6 @@/* SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying -file README.st for more information. +file Documentation/scsi/st.txt for more information. History:
drivers/scsi/qla1280.c +2 -2
@@ -776,8 +776,8 @@if (options)qla1280_setup (options,NULL );if (dummy_buffer[0 ] !='P' ) -printk (KERN_WARNING "qla1280: Please read the file /usr/src/linux/drivers" -"/scsi/README.qla1280\n" +printk (KERN_WARNING "qla1280: Please read the file /usr/src/linux" +"/Documentation/scsi/qla1280.txt\n" "qla1280: to see the proper way to specify options to the qla1280 " "module\n" "qla1280: Specifically, don't use any commas when passing arguments to\n"
drivers/scsi/st.c +2 -2
@@ -1,6 +1,6 @@/* SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying -file README.st for more information. +file Documentation/scsi/st.txt for more information. History: Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
@@ -3638,7 +3638,7 @@ }#ifndef MODULE -/* Set the boot options. Syntax is defined in README.st. +/* Set the boot options. Syntax is defined in Documentation/scsi/st.txt. */ static int __init st_setup (char *str) {
drivers/scsi/tmscsim.c +3 -2
@@ -5,7 +5,8 @@* Bus Master Host Adapter * * (C)Copyright 1995-1996 Tekram Technology Co., Ltd. * ***********************************************************************/ -/* (C) Copyright: put under GNU GPL in 10/96 (see README.tmscsim) * +/* (C) Copyright: put under GNU GPL in 10/96 * +* (see Documentation/scsi/tmscsim.txt) * *************************************************************************/ /* $Id: tmscsim.c,v 2.60.2.30 2000/12/20 01:07:12 garloff Exp $ */ /* Enhancements and bugfixes by *
@@ -1523,7 +1524,7 @@DC390_write32 (DMA_ScsiBusCtrl,EN_INT_ON_PCI_ABORT );PDEVSET1 ;PCI_READ_CONFIG_WORD (PDEV ,PCI_STATUS , &pstat);printk ("DC390: Register dump: PCI Status: %04x\n" , pstat); -printk ("DC390: In case of driver trouble read linux/drivers/scsi/README.tmscsim\n" ); +printk ("DC390: In case of driver trouble read linux/Documentation/scsi/tmscsim.txt\n" ); };