Skip to contentSkip to conversation

AC'97 compliant codec - query

DISCUSSION Anandhi Dhanabalan 1 participant 1 message May 8, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

Thanx for U'r response Solomon.
The CS4205 will be paired with a digital controller in x86 based geode processor.
I understand how the busmaster in the controller need to be set up for audio data transfer, But What i need to know is, how to write/read the codec registers ?

I am new to the list as well. Could U pls tell me where i can find the code samples U had mentioned

Thanx & Regards
Anandhi

Quoted 13 lines · Anandhi Dhanabalan
Quoted 1 line

I am a new to Audio driver development. I am currently

developing

Quoted 1 line

a driver for Crystal Audio codec CS4205.

You'll never use the CS4205 directly -- it is just an AC97 codec. You'll also need an AC97 controller, such as the one in the ICHx/southbridge chip in most modern chipsets.

That controller handles all of the details of serializing data and whatnot. You need to set up the controller to pass data in the right slots, and set up the codec's mixer and whatnot.

Quoted 7 lines

The CS4205 is specifically supported by the ac97_codec driver in alsa0.9.0rc1, and more generically supported by earlier versions. You may want to look at the intel8x0 driver code as well, as that is little
more than a thin hardware wrapper around the ac97 codec.

- Pizza

_________________________________________________________
Click below to visit monsterindia.com and review jobs in India or Abroad
http://monsterindia.rediff.com/jobs

_______________________________________________________________

Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]