Skip to contentSkip to conversation

Kernelpatch: multi line string problem in 2.5.14 with gcc3.x

PATCH J. Albers 2 participants 2 messages May 8, 2002

lore
Share & tools
lore

J. Albers

author
#0 lore raw

Hi,

this patches fix problems with multi line stings in 2.5.14 /w gcc 3.x

Best regards,
Jens Albers

========== Begin #1 ==========

aic7xxx_linux.c Wed May 8 08:01:24 2002 renamed from aic7xxx_linux.c_2.5.14 Wed May 8 08:00:27 2002 +0 -6
@@ -398,26 +398,26 @@
 MODULE_LICENSE("Dual BSD/GPL");
 #endif
 MODULE_PARM(aic7xxx, "s");
-MODULE_PARM_DESC(aic7xxx, "period delimited, options string.
-       verbose                 Enable verbose/diagnostic logging
-       no_probe                Disable EISA/VLB controller probing
-       no_reset                Supress initial bus resets
-       extended                Enable extended geometry on all controllers
-       periodic_otag           Send an ordered tagged transaction

periodically
- to prevent tag starvation. This may be
- required by some older disk drives/RAID
arrays.

-       reverse_scan            Sort PCI devices highest Bus/Slot to lowest
-       tag_info:<tag_str>      Set per-target tag depth
-       seltime:<int>           Selection 
Timeout(0/256ms,1/128ms,2/64ms,3/32ms)
-
-       Sample /etc/modules.conf line:
-               Enable verbose logging
-               Disable EISA/VLB probing
-               Set tag depth on Controller 2/Target 2 to 10 tags
-               Shorten the selection timeout to 128ms from its default of 256

-
- options
aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"' -");
+MODULE_PARM_DESC(aic7xxx, "period delimited, options string."

+"      verbose                 Enable verbose/diagnostic logging"
+"      no_probe                Disable EISA/VLB controller probing"
+"      no_reset                Supress initial bus resets"
+"      extended                Enable extended geometry on all controllers"
+"      periodic_otag           Send an ordered tagged transaction

periodically"
+" to prevent tag starvation. This may be"
+" required by some older disk drives/RAID
arrays."

+"      reverse_scan            Sort PCI devices highest Bus/Slot to lowest"
+"      tag_info:<tag_str>      Set per-target tag depth"
+"      seltime:<int>           Selection 
Timeout(0/256ms,1/128ms,2/64ms,3/32ms)"
+""
+"      Sample /etc/modules.conf line:"
+"              Enable verbose logging"
+"              Disable EISA/VLB probing"
+"              Set tag depth on Controller 2/Target 2 to 10 tags"
+"              Shorten the selection timeout to 128ms from its default of

256"
+""
+" options
aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"'" +);
#endif

static void ahc_linux_handle_scsi_status(struct ahc_softc *,
========== End #1 ==========

========== Begin #2 ==========

i2c-core.c Wed May 8 08:32:43 2002 renamed from i2c-core.c_2.5.14 Wed May 8 08:31:40 2002 +2 -4
@@ -381,10 +381,10 @@
                                                printk("i2c-core.o: while "
                                                       "unregistering driver "
                                                       "`%s', the client at "
-                                                      "address %02x of
-                                                      adapter `%s' could not
-                                                      be detached; driver
-                                                      not unloaded!",
+                                                      "address %02x of "
+                                                      "adapter `%s' could not

"
+ "be detached; driver "
+ "not unloaded!",

                                                       driver->name,
                                                       client->addr,
                                                       adap->name);

========== Begin #2 ==========