Turtle Beach Pinnacle/Fiji alsa driver 0.1.2
hi,
new in this is pcm record and midiin. latency (latency -m32 -M32 -b -r 48000, patched to allow 3 periods) runs with down to 32 frames. amSynth runs well with it on an 400PII. mmap driver for amSynth available from me. not needed, but gives you more voics with the fiji/pinnacle.
works:
PCM: Stereo record / playback mmaped fullduplex
with the alsa-tools aplay, pcm, aplay -M, latency with 3 periods patch, alsaplayer, amSynth
MIXER: Master, Pcm, Line In, Monitor MIDI: in VERSION: 0.9rc2CVS, patch attached OS: tested on Slackware 8.1rc1
not...yet:
PCM: periods / buffer != 3 MIDI: out
SPDIF:
KURZWEIL: start a mpu401 device
the patch archive consists off a diff, which is to be applied to the raw cvs-sources and two directories. after copying the also contained directories into the cvs tree do
cvscompile
make
make install
in alsa-driver as usual.
note: this has only been tested to build modules for a 2.4.18 kernel on an 400MHz PII with a pinnacle in non-pnp mode.
For additional infos concerning the fiji/pinnacle cards search for the pinnacle oss-free driver docus on the web.
there is a how-to install the needed firmware-files also.
cheers, karsten
__________________________________________________________________
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Yahoo! präsentiert als offizieller Sponsor das Fußball-Highlight des
Jahres: - http://www.FIFAworldcup.com
Hi Karsten,
At Wed, 26 Jun 2002 16:31:41 +0200 (CEST),
Quoted 43 lines · karsten wiese
hi,
new in this is pcm record and midiin. latency (latency -m32 -M32 -b -r 48000, patched to allow 3 periods) runs with down to 32 frames. amSynth runs well with it on an 400PII. mmap driver for amSynth available from me. not needed, but gives you more voics with the fiji/pinnacle.
works:
PCM: Stereo record / playback mmaped fullduplex
with the alsa-tools aplay, pcm, aplay -M, latency with 3 periods patch, alsaplayer, amSynthMIXER: Master, Pcm, Line In, Monitor MIDI: in VERSION: 0.9rc2CVS, patch attached OS: tested on Slackware 8.1rc1not...yet:
PCM: periods / buffer != 3 MIDI: outSPDIF:
KURZWEIL: start a mpu401 devicethe patch archive consists off a diff, which is to be applied to the raw cvs-sources and two directories. after copying the also contained directories into the cvs tree do
cvscompile
make
make install
in alsa-driver as usual.note: this has only been tested to build modules for a 2.4.18 kernel on an 400MHz PII with a pinnacle in non-pnp mode.
Quoted 5 lines
For additional infos concerning the fiji/pinnacle cards search for the pinnacle oss-free driver docus on the web.
there is a how-to install the needed firmware-files also.
thanks, we got finally the support for this old good card. i'd like to put this stuff into cvs, but before that, could you check the following things?
- missing rule for tb-classic module.
if there are two card modules, will there a common lowlevel module for them? or will be integrated?
- please remove the codes for old kernels.
the compatibility routines should go to alsa-driver tree, not on alsa-kernel tree.
- is there a workaround for the jiffires warp (32bit overflow)?
- please reformat the codes with a certain indent.
- you can use snd_printd() for debug printk.
- it'd be better to keep the uniformity of module parameters like other alsa modules, i.e. snd_xxx.
- obviously we can clean up msnd_pinnacle_mixer.c more :)
ciao,
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.com/sf
Turtle Beach Pinnacle/Fiji alsa driver 0.1.3
Hi Takashi,
here is a newer version.
it doesn't crash the pc when using oss emulation anymore.
it can do 2 (or 3) periods per buffer now.
Takashi Iwai <[email protected]> schrieb: > Hi Karsten,
Quoted 11 lines
thanks, we got finally the support for this old
card.
i'd like to put this stuff into cvs, but before
that, could you
check the following things?- missing rule for tb-classic module.
there is no classic module in this yet. mainly because i don't have such a card and thus could not test the driver. i left the files, so interested developers can start easier.
(i could do i module later that compiles but would be absolutly untested. you mean that?)
Quoted 4 lines
if there are two card modules, will there a common
lowlevel
module for them? or will be integrated?
made no decision on that...
Quoted 5 lines
- please remove the codes for old kernels.
the compatibility routines should go to
alsa-driver tree, not on
alsa-kernel tree.
done.
Quoted 2 lines
- is there a workaround for the jiffires warp
(32bit overflow)?
i only used jiffies in code that was not really used, cause it generated errors in the framework & crackles in the sound.
maybe cause that overflow wasn't handled correctly? no idea. commented that stuff out for now.
Quoted 1 line
- please reformat the codes with a certain indent.
done (correctly?)
Quoted 1 line
- you can use
snd_printd()for debug printk.
done (mostly)
Quoted 3 lines
- it'd be better to keep the uniformity of module
parameters like
other alsa modules, i.e.snd_xxx.
done
Quoted 2 lines
- obviously we can clean up
msnd_pinnacle_mixer.c
more :)
done
Quoted 5 lines
ciao,
Takashi
works:
PCM: Stereo record / playback mmaped fullduplex
with the alsa-tools aplay, pcm, aplay -M, latency, alsaplayer, amSynth, bristol, jack, ardour, artsd, oss-emulation
MIXER: Master, Pcm, Line In, Monitor MIDI: in VERSION: 0.9rc2CVS, patch attached OS: tested on Slackware 8.1rc1
not...yet:
MIDI: out, header
SPDIF:
KURZWEIL: start a mpu401 device
the patch archive consists off a diff, which is to be applied to the raw cvs-sources and two directories. after copying the also contained directories into the cvs tree do
cvscompile
make
make install
in alsa-driver as usual.
note: this has only been tested to build modules for a 2.4.18 kernel on an single 400MHz PII with a pinnacle in non-pnp mode.
regards, karsten
__________________________________________________________________
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Yahoo! präsentiert als offizieller Sponsor das Fußball-Highlight des
Jahres: - http://www.FIFAworldcup.com
Re: Turtle Beach Pinnacle/Fiji alsa driver 0.1.3
Hi Karsten,
At Sat, 6 Jul 2002 15:11:36 +0200 (CEST),
Quoted 5 lines · karsten wiese
here is a newer version.
it doesn't crash the pc when using oss emulation
anymore.
it can do 2 (or 3) periods per buffer now.
thanks for your work.
now it's committed to cvs. please check the cvs tree.
i changed slightly your patch:
- the module is renamed as snd-msnd-classic (with hyphen)
- all stuffs are still on alsa-drivers. will be moved to alsa-kernel and submitted to 2.5 kernel tree later once after it's confirmed to work fine. this is our policy.
regarding to pnp.
is it possible to integrate it using the standard isapnp api? or is it a specific one?
ciao,
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Oh, it's good to be a geek.
http://thinkgeek.com/sf
Re: Turtle Beach Pinnacle/Fiji alsa driver 0.1.3
Hi Takashi,
Takashi Iwai <[email protected]> wrote: > Hi Karsten,
Quoted 4 lines
At Sat, 6 Jul 2002 15:11:36 +0200 (CEST),
Quoted 1 line · karsten wiese
Quoted 8 lines
Quoted 4 lines
here is a newer version.
it doesn't crash the pc when using oss emulation
anymore.
it can do 2 (or 3) periods per buffer now.thanks for your work.
now it's committed to cvs. please check the cvs
tree.
works fine here :-)
Quoted 11 lines
i changed slightly your patch:
- the module is renamed as snd-msnd-classic (with hyphen)
- all stuffs are still on alsa-drivers. will be moved to alsa-kernel
and submitted to 2.5 kernel tree later once after
it's confirmed to
work fine. this is our policy.
Quoted 4 lines
regarding to pnp.
is it possible to integrate it using the standard
isapnp api?
or is it a specific one?
hmmm.., don't know & don't want to test that on this machine, 'cause it is to also run NT4 (:no pnp for stability) for commercial reasons.
Quoted 5 lines
ciao,
Takashi
can we put the firmware-binaries on cvs as well? so far it is necessary to extract them with some extra steps...
best,
Karsten
__________________________________________________________________
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Yahoo! präsentiert als offizieller Sponsor das Fußball-Highlight des
Jahres: - http://www.FIFAworldcup.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Stuff, things, and much much more.
http://thinkgeek.com/sf
Re: Turtle Beach Pinnacle/Fiji alsa driver 0.1.3
At Tue, 9 Jul 2002 15:22:01 +0200 (CEST),
Quoted 4 lines · karsten wiese
can we put the firmware-binaries on cvs as well? so far it is necessary to extract them with some extra steps...
we need the permission from the vendor regarding this. do you have any contact with turtle beach?
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Stuff, things, and much much more.
http://thinkgeek.com/sf