Skip to contentSkip to conversation

2.4.19-rc1: NETDEV WATCHDOG: eth0: transmit timed out

DISCUSSION Christian Bornträger 2 participants 2 messages Jul 6, 2002 – Jul 9, 2002

lore
Share & tools
lore
#0 lore raw

Hello list,

I found some of these messages in the archive, but nothing really helped me. I have to remove the 3c59x driver , because network restart is not enough to bring back life to my network connection.

I never saw this message with older kernels (<=2.4.18), but I moved to another place with another network, so I am not sure if it is related to some hardware problems or driver trouble.

The 3com shares the interrupt with some other cards on an KT133A-chipset. This happens unfrequent but mostly when I have high traffic.

Thanks in advance

Christian

dmesg:
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0ed8 media 88a0 dma 000000a0. Flags; bus-master 1, dirty 57811(3) current 57827(3) Transmit list 1cb202c0 vs. dcb202c0.

  0: @dcb20200  length 8000002a status 0000002a
  1: @dcb20240  length 8000002a status 8000002a
  2: @dcb20280  length 8000002a status 8000002a
  3: @dcb202c0  length 8000002a status 0000002a
  4: @dcb20300  length 8000002a status 0000002a
  5: @dcb20340  length 8000002a status 0000002a
  6: @dcb20380  length 8000002a status 0000002a
  7: @dcb203c0  length 8000002a status 0000002a
  8: @dcb20400  length 8000002a status 0000002a
  9: @dcb20440  length 8000002a status 0000002a
  10: @dcb20480  length 8000002a status 0000002a
  11: @dcb204c0  length 8000002a status 0000002a
  12: @dcb20500  length 8000002a status 0000002a
  13: @dcb20540  length 8000002a status 0000002a
  14: @dcb20580  length 8000002a status 0000002a
  15: @dcb205c0  length 8000002a status 0000002a

eth0: Resetting the Tx ring pointer.

lspci:
[root@dyn295 borni]# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Subsystem: Asustek Computer, Inc. A7V133/A7V133-C Mainboard
Flags: bus master, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d5000000-d66fffff
Prefetchable memory behind bridge: d7f00000-dfffffff
Capabilities: [80] Power Management version 2

00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
40)
Subsystem: Asustek Computer, Inc. A7V133/A7V133-C Mainboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2

00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2

00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2

00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: Asustek Computer, Inc. A7V133/A7V133-C Mainboard
Flags: medium devsel, IRQ 9
Capabilities: [68] Power Management version 2

00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
Subsystem: Askey Computer Corp.: Unknown device 3002
Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at d7000000 (32-bit, prefetchable) [size=4K]

00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
02)
Subsystem: Askey Computer Corp.: Unknown device 3002
Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at d6800000 (32-bit, prefetchable) [size=4K]

00:0a.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
Subsystem: Unknown device 4942:4c4c
Flags: bus master, slow devsel, latency 32, IRQ 5 I/O ports at a400 [size=64]

00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at a000 [size=128]
Memory at d4800000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1

00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev
02)

        Subsystem: Promise Technology, Inc. Ultra100
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at 9800 [size=8]
        I/O ports at 9400 [size=4]
        I/O ports at 9000 [size=8]
        I/O ports at 8800 [size=4]
        I/O ports at 8400 [size=64]
        Memory at d4000000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [58] Power Management version 1

01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX] (rev a1) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc. AGP-V7100 Pro
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11 Memory at d5000000 (32-bit, non-prefetchable) [size=16M] Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at d7ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0

lsmod:

Module Size Used by Not tainted

3c59x                  27184   1
es1370                 25708   1
soundcore               4036   4  [es1370]
af_packet              13416   1  (autoclean)
iptable_mangle          2168   0  (autoclean) (unused)
iptable_nat            14424   0  (autoclean) (unused)
ipt_LOG                 3416   2  (autoclean)
ipt_limit                888   2  (autoclean)
iptable_filter          1740   1  (autoclean)
ip_tables              11704   7  [iptable_mangle iptable_nat ipt_LOG 
ipt_limit iptable_filter]
usb-uhci               22860   0  (unused)
nls_iso8859-1           2876   3  (autoclean)
isofs                  26548   3  (autoclean)
inflate_fs             17892   0  (autoclean) [isofs]
loop                    9496   9  (autoclean)
nls_iso8859-15          3388   1  (autoclean)
nls_cp437               4380   1  (autoclean)
vfat                   10332   1  (autoclean)
fat                    32984   0  (autoclean) [vfat]
sr_mod                 15480   0  (autoclean)
cdrom                  28544   0  (autoclean) [sr_mod]
w83781d                19344   0  (unused)
i2c-proc                7152   0  [w83781d]
i2c-viapro              3920   0  (unused)
i2c-core               13540   0  [w83781d i2c-proc i2c-viapro]
ide-scsi                8784   0
scsi_mod               55316   2  [sr_mod ide-scsi]
keybdev                 2080   0  (unused)
mousedev                4244   1
hid                    15012   0  (unused)
usbmouse                2260   0  (unused)
usbcore                60576   1  [usb-uhci hid usbmouse]
input                   3584   0  [keybdev mousedev usbmouse]
ip_conntrack_ftp        3680   0  (unused)
ip_conntrack           14972   2  [iptable_nat ip_conntrack_ftp]
rtc                     6940   0  (autoclean)
#1 lore raw
Quoted 10 lines · On Sat, 6 Jul 2002, Christian [iso-8859-15] Bornträger wrote:

I found some of these messages in the archive, but nothing really helped me. I have to remove the 3c59x driver , because network restart is not enough to bring back life to my network connection.

I never saw this message with older kernels (<=2.4.18), but I moved to another place with another network, so I am not sure if it is related to some hardware problems or driver trouble.

The 3com shares the interrupt with some other cards on an KT133A-chipset. This happens unfrequent but mostly when I have high traffic.

I have seen interrupt problems with that chipset when sharing interrupts with the onboard stuff. I had to disable the 2nd serial port to get a NIC working, and I still see spurrious INT from the parallel port, which I need. Even when not in use it babbles.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.