Skip to contentSkip to conversation

Is make relabel suposed to be run from policy or or setfiles?

DISCUSSION JW 3 participants 7 messages Jul 9, 2002 SELinux security module

lore
Share & tools
lore

JW

author
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

As per the instructions on http://www.nsa.gov/selinux/doc/readme.html section 16, I rebooted into the selinux kernel, loged in as jw (who is the sysadmin, sysadm_r:sysadm_t) su'd to root (who,a ccording to the default selinux setup [which I did not change] is a 'common user', cd'd to /usr/src/selinux/policy and ran 'make relabel' with the following results:

ccs001:/usr/src/selinux/policy # make relabel
/usr/local/selinux/bin/setfiles file_contexts/file_contexts mount | awk '/(ext[23]|reiserfs)/{print $3}'

/usr/local/selinux/bin/setfiles:  Running on a SELinux kernel, using new system calls
/usr/local/selinux/bin/setfiles:  read 665 specifications
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:inetd_var_log_t on line number 625
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:inetd_var_log_t on line number 626
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:inetd_var_log_t on line number 637
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:inetd_var_log_t on line number 638
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:initrc_runlevel_t on line number 654
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:initrc_runlevel_t on line number 655
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:initrc_runlevel_t on line number 668
/usr/local/selinux/bin/setfiles:  invalid context system_u:object_r:initrc_runlevel_t on line number 669

make: *** [relabel] Error 1
ccs001:/usr/src/selinux/policy #

I did notice the following in /var/log/warn:

Jul  8 19:48:18 ccs001 kernel:
Jul  8 19:48:18 ccs001 kernel: avc:  denied  { write } for  pid=759 exe=/bin/su path=/dev/log dev=08:03 ino=26755 scontext=jw:sysadm_r:sysadm_su_t tcontext=system_u:object_r:device_t tclass=sock_file
Jul  8 19:48:18 ccs001 kernel:
Jul  8 19:48:18 ccs001 kernel: avc:  denied  { sendto } for  pid=759 exe=/bin/su path=/dev/log scontext=jw:sysadm_r:sysadm_su_t tcontext=system_u:system_r:initrc_t tclass=unix_dgram_socket

I noticed a post from Russel suggested that make relabel should be run from selinux/setfiles/ not selinux/policy, but I'm not sure if that's correct or not.

ccs001:/usr/src/selinux/setfiles # make relabel
chcon system_u:object_r:setfiles_exec_t /usr/local/selinux/bin/setfiles ccs001:/usr/src/selinux/setfiles #

Is that correct? Based on some discussion I had on IRC, I think it is NOT correct.
Perhaps someone could update the web page if it is correct.
I'll also point out that step 17 (PATH changes) have to occur before you can run make relabel, because use is made of /usr/local/selinux/chcon

Just out of curiosity, why do you have to be root to do that? I have no doubt that I've much to lera here :-) but considering that 'jw' is sysadm_* and 'root' is just user_*, I would think that jw would be the proper account to run make relabel under.

- --

- ---------------------------------------------------- Jonathan Wilson
System Administrator
Cedar Creek Software http://www.cedarcreeksoftware.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9Kjl0Q5u80xXOLBcRAv2EAJ431gypUeAcKK8KZJS9JGutL+wFRACcCrgo slqOJh1GOr5CDofyUUQJb84=
=4n1v
-----END PGP SIGNATURE-----

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#1 lore raw

lsm3 notes

Hello,

Couple of things I noted about the new lsm3

I keep seeing /dev/xconsole avc's.

This is from startup
allow initrc_t device_t:fifo_file { setattr };
#EXE=/bin/chmod PATH=/dev/xconsole : setattr

startup as well
allow initrc_t resolv_conf_t:file { setattr };
#EXE=/bin/chmod PATH=/etc/resolv.conf : setattr

when I ssh into the box
allow sshd_t sysadm_home_t:dir { search };
#EXE=/usr/sbin/sshd PATH=/root : search

when sysklogd starts at boot
allow syslogd_t device_t:fifo_file { read write };
#EXE=/sbin/syslogd PATH=/dev/xconsole : read write

when I tried to tail syslog as user_r
allow user_t var_log_t:file { getattr read };
#EXE=/bin/bash PATH=/var/log/syslog : getattr
#EXE=/usr/bin/tail PATH=/var/log/syslog : read

Most notably problems with sysklogd, and it's not writing events to /var/log/syslog

Ed

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#2 lore raw

Re: lsm3 notes

Quoted 4 lines · Ed Street

I keep seeing /dev/xconsole avc's.
This is from startup
allow initrc_t device_t:fifo_file { setattr };
#EXE=/bin/chmod PATH=/dev/xconsole : setattr

/dev/xconsole doesn't exist on my systems. Feel free to define an appropriate type and submit a patch to types/device.te and file_contexts/type.fc, along with a patch to whatever domains require access. What creates this FIFO?

Quoted 3 lines

startup as well
allow initrc_t resolv_conf_t:file { setattr };
#EXE=/bin/chmod PATH=/etc/resolv.conf : setattr

Why are your rc scripts changing the mode on /etc/resolv.conf? In any event, this is probably harmless.

Quoted 3 lines

when I ssh into the box
allow sshd_t sysadm_home_t:dir { search };
#EXE=/usr/sbin/sshd PATH=/root : search

Do you really need to login directly as root?

Quoted 4 lines

when I tried to tail syslog as user_r
allow user_t var_log_t:file { getattr read };
#EXE=/bin/bash PATH=/var/log/syslog : getattr
#EXE=/usr/bin/tail PATH=/var/log/syslog : read

Do you really want to permit ordinary users to read your logs?

Quoted 2 lines

Most notably problems with sysklogd, and it's not writing events to /var/log/syslog

Are klogd and syslogd running in the right domains?

--
Stephen D. Smalley, NAI Labs
[email protected]

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#3 lore raw

RE: lsm3 notes

Hello,

=> > I keep seeing /dev/xconsole avc's.
=> > This is from startup
=> > allow initrc_t device_t:fifo_file { setattr };
=> > #EXE=/bin/chmod PATH=/dev/xconsole : setattr
=>
=> /dev/xconsole doesn't exist on my systems. Feel free to define an => appropriate type and submit a patch to types/device.te and => file_contexts/type.fc, along with a patch to whatever domains require => access. What creates this FIFO?

I'm not 100% sure why it's doing the file_fifo or the xconsole. It does warrant further investigation.

=>
=> > startup as well
=> > allow initrc_t resolv_conf_t:file { setattr };
=> > #EXE=/bin/chmod PATH=/etc/resolv.conf : setattr
=>
=> Why are your rc scripts changing the mode on /etc/resolv.conf? => In any event, this is probably harmless.

I think at load of services it's looking at /etc/resolv.conf for dns issues but it eludes me as to why setattr is being issued. Another good reason for Selinux, is to see what linux is REALLY doing behind our backs with out our knowing.

=>
=> > when I ssh into the box
=> > allow sshd_t sysadm_home_t:dir { search };
=> > #EXE=/usr/sbin/sshd PATH=/root : search
=>
=> Do you really need to login directly as root?

No I normally ssh in as a user and su to root. I also noted that the path is not being set correctly either.

=>
=> > when I tried to tail syslog as user_r
=> > allow user_t var_log_t:file { getattr read };
=> > #EXE=/bin/bash PATH=/var/log/syslog : getattr
=> > #EXE=/usr/bin/tail PATH=/var/log/syslog : read
=>
=> Do you really want to permit ordinary users to read your logs?

No, this can be ignored and I should have left it out. Figured I would see what it gave in this case.

=>
=> > Most notably problems with sysklogd, and it's not writing events to => > /var/log/syslog
=>
=> Are klogd and syslogd running in the right domains?

Yes klogd and syslogd is running correctly. Seems that Selinux is denying access to both on a restart. I am in agreement they may not have the correct label (same issue as raid devices )

IN any case this is definitely turning out to be a very fun project to be working on. It's proving some rather insightful views into linux.

Ed

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#4 lore raw

RE: lsm3 notes

Quoted 2 lines · Ed Street

No I normally ssh in as a user and su to root. I also noted that the path is not being set correctly either.

If you ssh in as a user, run newrole -r sysadm_r, and then su, you should be fine.

The errors when directly logging in as root are a consequence of removing direct transitions from sshd_t to sysadm_t and changing the default login context for root to user_r. sshd_t no longer has search access to sysadm_home_t, so you'll see that denial, and the root shell will start in user_r:user_t, so accesses to any of the /root files by the shell will also be denied (including reading the root dotfiles, but these audit messages are suppressed via dontaudit rules). If you then use newrole -r sysadm_r, you can work normally as root. Hence, it is possible to directly login as root if necessary, but you'll run through some nonfatal denials.

Quoted 3 lines

Yes klogd and syslogd is running correctly. Seems that Selinux is denying access to both on a restart. I am in agreement they may not have the correct label (same issue as raid devices )

If you mean restarting them from an administrator shell, you need to use run_init to do that. Otherwise, they'll end up with the wrong contexts.

--
Stephen D. Smalley, NAI Labs
[email protected]

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#5 lore raw
In reply to JW
Quoted 2 lines · JW

/usr/local/selinux/bin/setfiles: invalid context system_u:object_r:inetd_var_log_t on line number 625 /usr/local/selinux/bin/setfiles: invalid context system_u:object_r:initrc_runlevel_t on line number 669

The types listed above are not defined in the upstream .te files nor are they used in the upstream .fc files. So I'll assume that you are using a customized policy other than the example policy. It would be helpful to explicitly identify what policy you are using. In any event, the error is quite simple: you are using types in your .fc files that are not defined in your .te files.

Quoted 2 lines

I noticed a post from Russel suggested that make relabel should be run from selinux/setfiles/ not selinux/policy, but I'm not sure if that's correct or not.

That changed in the May 2nd release. Prior to that release, the file contexts configuration lived in the setfiles directory separately from the policy and you ran 'make relabel' in the setfiles directory. Since that release, the file contexts configuration has lived under the policy directory and you perform the 'make relabel' in the policy directory.

Quoted 3 lines

ccs001:/usr/src/selinux/setfiles # make relabel
chcon system_u:object_r:setfiles_exec_t /usr/local/selinux/bin/setfiles ccs001:/usr/src/selinux/setfiles #

This is not the 'make relabel' that you want. The 'relabel' targets in the setfiles, selopt, and utils Makefiles are selective relabels of specific programs installed by those Makefiles, as opposed to a full relabeling of the entire filesystem. These targets are a convenience when installing new versions of these particular programs on an existing SELinux system so that you can do a 'make install relabel' of these programs and end up with a newly installed program with the right security context. They are separate from the base 'install' target since they will not work on a non-SELinux kernel for an initial install of SELinux.

Quoted 2 lines

I'll also point out that step 17 (PATH changes) have to occur before you can run make relabel, because use is made of /usr/local/selinux/chcon

Not a problem. The 'make relabel' that you want doesn't use chcon.

Quoted 2 lines

Just out of curiosity, why do you have to be root to do that? I have no doubt that I've much to lera here :-) but considering that 'jw' is sysadm_* and 'root' is just user_*, I would think that jw would be the proper account to run make relabel under.

You need to be root to create and/or update the persistent label mappings (if running on a non-SELinux kernel) and to traverse the entire filesystem (whether running on a non-SELinux kernel or a SELinux kernel). You can login as a normal user initially, but you need to su to root. When running on a SELinux kernel, you also need to be in sysadm_r.

Keep in mind that the SELinux access controls are orthogonal to the Linux access controls, and that both access controls must authorize an operation in order for it to be performed.

--
Stephen D. Smalley, NAI Labs
[email protected]

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

author
#6 lore raw
Quoted 9 lines · you
Quoted 4 lines · JW

/usr/local/selinux/bin/setfiles: invalid context system_u:object_r:inetd_var_log_t on line number 625 /usr/local/selinux/bin/setfiles: invalid context system_u:object_r:initrc_runlevel_t on line number 669

The types listed above are not defined in the upstream .te files nor are they used in the upstream .fc files. So I'll assume that you are using a customized policy other than the example policy.

Actually, no, at the time I was reciving those error messages, I was indeed using the default ploicy files, policy11. I am running on SuSE 8.0 Most of those errors whent away when I added Carstens's additional policy files for SuSE.

Quoted 3 lines

In any event, the error is
quite simple: you are using types in your .fc files that are not defined in your .te files.

Ok, that is the information I was looking for.

Quoted 4 lines
Quoted 1 line

Just out of curiosity, why do you have to be root to do that?

You can login as a normal user initially, but you need to su to root. When running on a SELinux kernel, you also need to be in sysadm_r.

Presumeably you mean su and newrole. I haven't tried it yet, I will later.

Quoted 3 lines

Keep in mind that the SELinux access controls are orthogonal to the Linux access controls, and that both access controls must authorize an operation in order for it to be performed.

Ok. I was under the impression (from things I read and heard), that root was pretty much reduced to a normal user, and the sysadm_* user became, in effect, root. But I'm still reading on the subject, hopefully there's something written about this in the documentation.

Thank you.

JW

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.