Skip to contentSkip to conversation

suspend-to-ram on A7V333

DISCUSSION Major A 2 participants 2 messages Nov 2, 2001 – Aug 17, 2002 1 message not in the archive ACPI

lore
Share & tools
lore
#2 lore raw
In reply to a message not in the archive

Hi!

Quoted 2 lines

3. I can get use the S0/1/4/5 states by piping the corresponding number into /proc/acpi/sleep, and even S3 seems to work -- it

You need 2.5.X for ACPI/S3.
Pavel

Signature · 9 lines
Philips Velo 1: 1"x4"x8", 300gram, 60, 12MB, 40bogomips, linux, mutt,
details at http://atrey.karlin.mff.cuni.cz/~pavel/velo/index.html.



-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone?  Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390

Major A

author
#0 lore raw

Hi,

I'm a total newcomer to ACPI, I tried it today because I want to get the suspend-to-ram feature of my mainboard working. This is what I've found out:

1. Using a plain linux kernel 2.4.19, the ospm-* drivers cannot be used as modules -- they create unresolved symbols. (This is not the case with 2.4.18.) Compiling them as static drivers works, and I get the relevant files in /proc/acpi, everything seems to work fine.

2. Pressing the power button creates an event which is dealt with by acpid, seems to work OK.

3. I can get use the S0/1/4/5 states by piping the corresponding number into /proc/acpi/sleep, and even S3 seems to work -- it prints a line saying something like "entering S3" (I couldn't read it because it was only a short time before the machine shut down). I suspect this is the S3 mode, with the power light flashing, but I cannot get the machine back out of suspend! If I press the power button or ctrl-esc (which I have set up as the keyboard-on combination) or even the "green button", it boots as if it hadn't suspended. Other keys or the (USB) mouse do nothing. Using the PS/2 mouse power-on feature doesn't help either.

4. If I disable the "suspend-to-ram" feature in the BIOS, the S3 option disappears from /proc/acpi/sleep, as expected. The "fast resume" BIOS option doesn't seem to make any difference.

Anyway, does anyone have any experience with this? I can't try all this under Windows (thank God), it seems that the computer just forgets that it is supposed to be suspended only, whether that be a BIOS or Linux problem.

One more thing -- I have a SCSI card with a BIOS in the computer, maybe that makes a difference?

Hardware information: Asus A7V333 board with Athlon XP, Enermax power supply (plenty of juice on +5VSB), PS/2 keyboard.

Thanks,

Andras

===========================================================================
Major Andras
e-mail: [email protected]
www: http://andras.webhop.org/
===========================================================================

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390