ide-scsi (or ide-via?) with 2.4.20-pre*-ac*

I have some weird problems when trying to write a CD under a 2.4.20-pre*-ac* kernel [everything works fine on the same computer with a 2.4.19-rc-ac1]. The CD writer is an LG-8080B connected as slave to the secondary channel of a VIA vt82c586b (rev. 47) controller.

Cdrecord, when I try to write an image at full speed (that is, speed=8), aborts after the first 4 Mb with the following error:

cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 08 99 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid)

The weird thing is that, according to the "current writing speed indication" (I have tried several versions of cdrecord as well, and right now I'm doing my tests with 1.11a30 which should print the actual transfer rate --- it was just the same error with 1.10, though), the computer claims it
was recording at "20.3x" at the time of the failure: something seems to be very wrong indeed.
If I re-run cdrecord forcing the speed to be "4x", then it succeeds, even if the actual reported (and timed) speed is "7.5x".

Further information:
dma is turned off for the drive and toggling unmask-irq does not seem to change anything. The host adapter emulation is seen as the second SCSI controller, the first being an aic7850.

Is there any further test I can do?

kind regards,
lg

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/