Skip to contentSkip to conversation

Oops after removing PCMCIA modem with low latency patch

DISCUSSION Diego Biurrun 5 participants 7 messages Aug 30, 2002 – Sep 4, 2002

lore
Share & tools
lore
#0 lore raw

Hello!

I just tried your 2.4.19-low-latency patch on a stock 2.4.19 kernel and my box oopses when I manually remove my PCMCIA modem. I know I should probably use cardctl eject, but I guess the kernel should not oops in any case and other PCMCIA cards do not have that problem.

I spent the whole day trying to debug the oops because minicom and my serial console do not seem to want to get along. I suspect a hardware bug somewhere, I always got garbled output. I managed to capture the output once but was not able to reproduce the correct settings again, so apologies if I cannot provide the correct information.

Back to topic: I figured you might be interested in this, so I am sending you the output of ksymoops. If you need more information I will be more than happy to provide it.
Thanks for your work on the Linux kernel.
Regards

Diego Biurrun

My system:
Toshiba Satellite 320CDT
Pentium MMX 233 96MB RAM

output of cardctl ident:
Socket 0:
product info: "Kingston", "KNE-CB4TX", "", "1.00"
manfid: 0x0186, 0x0101
function: 6 (network)
Socket 1:
product info: "ROCKWELL", "RFI AnyCom-Eco 336 PC Card", "021", "A"
manfid: 0x0175, 0x0000
function: 2 (serial)

output of lspci -v:

00:00.0 Host bridge: Toshiba America Info Systems 601 (rev a0)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 0

00:04.0 VGA compatible controller: Chips and Technologies F65555 HiQVPro (rev c6) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: stepping, medium devsel
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=256K]

00:0b.0 USB Controller: NEC Corporation USB (rev 02) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]

00:11.0 Communication controller: Toshiba America Info Systems FIR Port (rev 21)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 64, IRQ 11
I/O ports at ffe0 [size=32]

00:13.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)

	Subsystem: Toshiba America Info Systems: Unknown device 0001
	Flags: bus master, slow devsel, latency 0, IRQ 11
	Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
	Memory window 0: 10400000-107ff000 (prefetchable)
	Memory window 1: 10800000-10bff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	16-bit legacy interface ports at 0001

00:13.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)

	Subsystem: Toshiba America Info Systems: Unknown device 0001
	Flags: bus master, slow devsel, latency 0, IRQ 11
	Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
	Memory window 0: 10c00000-10fff000 (prefetchable)
	Memory window 1: 11000000-113ff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	16-bit legacy interface ports at 0001

14:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)

	Subsystem: Kingston Technologies: Unknown device 0002
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at 4000 [size=128]
	Memory at 10800000 (32-bit, non-prefetchable) [size=1K]
	Expansion ROM at 10400000 [size=256K]

ksymoops 2.4.5 on i586 2.4.19. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19/ (default)
-m /boot/System.map-2.4.19 (default)

Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.

kernel BUG at sched.c:577!

invalid operand: 0000
CPU:    0
EIP:    0010:[<c0112de9>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00000018 ebx: c024a000 ecx: c3378000 edx: 00000001
esi: 00000000 edi: c3147280 ebp: c024be18 esp: c024bdf4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c024b000)

Stack: c01ed4de c024a000 00000000 c3147280 c11f2ba0 00000001 00000000 c024a000 
       c0164127 c024be20 c0113d15 c35b753c c013272f c3147280 00000000 c0215860 
       c35b753c c0142647 c3147280 c3147280 c0143046 c3147280 c35447a0 c34a1ec0 
Call Trace:    [<c0164127>] [<c0113d15>] [<c013272f>] [<c0142647>] [<c0143046>]
  [<c0165bad>] [<c0140cc3>] [<c01643b0>] [<c01649ba>] [<c0164a0f>] [<c016e1ef>]
  [<c0115aa3>] [<c01159e7>] [<c0181136>] [<c725cd4a>] [<c725cd1c>] [<c011c94f>]
  [<c0119482>] [<c01193b6>] [<c01191ca>] [<c0109b9d>] [<c0106d10>] [<c010bd28>]
  [<c0106d10>] [<c0106d33>] [<c0106d97>] [<c0105000>] [<c0105027>]
Code: 0f 0b 41 02 d6 d4 1e c0 83 c4 04 8b 4d f4 c1 e1 05 81 c1 40 
Quoted 7 lines
Quoted 7 lines

EIP; c0112de9 <schedule+4d/2f4> <=====

ebx; c024a000 <init_task_union+0/2000>
ecx; c3378000 <_end+30e93ac/6f9f3ac>
edi; c3147280 <_end+2eb862c/6f9f3ac>
ebp; c024be18 <init_task_union+1e18/2000>
esp; c024bdf4 <init_task_union+1df4/2000>

Trace; c0164127 <_devfs_walk_path+5f/d4>
Trace; c0113d15 <set_running_and_schedule+1d/24>
Trace; c013272f <invalidate_inode_buffers+1b/88>
Trace; c0142647 <clear_inode+b/b0>
Trace; c0143046 <iput+d6/1ac>
Trace; c0165bad <devfs_d_iput+59/68>
Trace; c0140cc3 <dput+c3/124>
Trace; c01643b0 <free_dentry+3c/44>
Trace; c01649ba <_devfs_unregister+36/74>
Trace; c0164a0f <devfs_unregister+17/24>
Trace; c016e1ef <tty_unregister_devfs+43/50>
Trace; c0115aa3 <release_console_sem+73/78>
Trace; c01159e7 <printk+ff/114>
Trace; c0181136 <unregister_serial+5e/7c>
Trace; c725cd4a <[serial_cs]serial_release+2e/80>
Trace; c725cd1c <[serial_cs]serial_release+0/80>
Trace; c011c94f <timer_bh+26b/384>
Trace; c0119482 <bh_action+1a/40>
Trace; c01193b6 <tasklet_hi_action+4a/70>
Trace; c01191ca <do_softirq+5a/ac>
Trace; c0109b9d <do_IRQ+a1/b4>
Trace; c0106d10 <default_idle+0/28>
Trace; c010bd28 <call_do_IRQ+5/d>
Trace; c0106d10 <default_idle+0/28>
Trace; c0106d33 <default_idle+23/28>
Trace; c0106d97 <cpu_idle+3f/54>
Trace; c0105000 <_stext+0/0>
Trace; c0105027 <rest_init+27/28>

Code; c0112de9 <schedule+4d/2f4>
00000000 <_EIP>:
Code; c0112de9 <schedule+4d/2f4> <=====
0: 0f 0b ud2a <=====
Code; c0112deb <schedule+4f/2f4>
2: 41 inc %ecx
Code; c0112dec <schedule+50/2f4>
3: 02 d6 add %dh,%dl
Code; c0112dee <schedule+52/2f4>
5: d4 1e aam $0x1e
Code; c0112df0 <schedule+54/2f4>
7: c0 83 c4 04 8b 4d f4 rolb $0xf4,0x4d8b04c4(%ebx)
Code; c0112df7 <schedule+5b/2f4>
e: c1 e1 05 shl $0x5,%ecx
Code; c0112dfa <schedule+5e/2f4>
11: 81 c1 40 00 00 00 add $0x40,%ecx

<0>Kernel panic: Aiee, killing interrupt handler!

1 warning issued. Results may not be reliable.

#1 lore raw
Quoted 5 lines · Diego Biurrun

Hello!

I just tried your 2.4.19-low-latency patch on a stock 2.4.19 kernel and my box oopses when I manually remove my PCMCIA modem.

Yup. The pcmcia drivers like to call sleeping devfs functions from within a timer handler. The kernel tries to perform a context switch in interrupt context and bugs out. This can happen without the low-latency patch, but doesn't.

The fix for that is to change the (strange) deferred deregister thing in several of the CardServices drivers to punt the activity up to process context via schedule_task(), but nobody has done that yet.

Probably, you can add

	if (in_interrupt())
		return;

to schedule() to make the BUGs go away. Not using devfs makes
them go away too - but it is not a devfs bug.

#2 lore raw

vm_operations .. how to unmap?

Hi,
I am exporting kernel memory to user processes using mmap() entry point of my driver. Now, when the user calls unmap(), I would like to deallocate the pages which I allocated at mmap() time. How can I do that? unmap() entry point is not provided by vm_operations structure in mm.h file. I will really appreciate any suggestion/guidance.

Thanks,
Imran.

#6 lore raw
In reply to Andrew Morton
Quoted 14 lines · Andrew Morton
Quoted 3 lines · Diego Biurrun

I just tried your 2.4.19-low-latency patch on a stock 2.4.19 kernel and my box oopses when I manually remove my PCMCIA modem.

Yup. The pcmcia drivers like to call sleeping devfs functions from within a timer handler. The kernel tries to perform a context switch in interrupt context and bugs out. This can happen without the low-latency patch, but doesn't.

The fix for that is to change the (strange) deferred deregister thing in several of the CardServices drivers to punt the activity up to process context via schedule_task(), but nobody has done that yet.

Quoted 7 lines

Probably, you can add

	if (in_interrupt())
		return;

to schedule() to make the BUGs go away. Not using devfs makes
them go away too - but it is not a devfs bug.

Thanks for the ultraquick reply. I managed to get another oops trace from within (shudder) Windows Hyperterminal, I am sending this along just in case it may help you. Adding the two lines you mention to sched.c also fixed the problem.
Thank you!

Diego Biurrun

ksymoops 2.4.5 on i586 2.4.19. Options used
-V (default)
-k ksyms (specified)
-l modules (specified)
-o /lib/modules/2.4.19/ (default)
-m /boot/System.map-2.4.19 (default)

kernel BUG at sched.c:577!

invalid operand: 0000
CPU:    0
EIP:    0010:[<c0112de9>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00000018 ebx: c024a000 ecx: c3446000 edx: 00000001
esi: 00000000 edi: c27fda00 ebp: c024be18 esp: c024bdf4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c024b000)

Stack: c01ed4de c024a000 00000000 c27fda00 c11f2ba0 00000001 00000000 c024a000 
       c0164127 c024be20 c0113d15 c364653c c013272f c27fda00 00000000 c0215860 
       c364653c c0142647 c27fda00 c27fda00 c0143046 c27fda00 c35d5620 c278b3a0 
Call Trace:    [<c0164127>] [<c0113d15>] [<c013272f>] [<c0142647>] [<c0143046>]
  [<c0165bad>] [<c0140cc3>] [<c01643b0>] [<c01649ba>] [<c0164a0f>] [<c016e1ef>]
  [<c0115aa3>] [<c01159e7>] [<c0181136>] [<c725cd4a>] [<c725cd1c>] [<c011c94f>]
  [<c0119482>] [<c01193b6>] [<c01191ca>] [<c0109b9d>] [<c0106d10>] [<c010bd28>]
  [<c0106d10>] [<c0106d33>] [<c0106d97>] [<c0105000>] [<c0105027>]
Code: 0f 0b 41 02 d6 d4 1e c0 83 c4 04 8b 4d f4 c1 e1 05 81 c1 40 
Quoted 7 lines
Quoted 7 lines

EIP; c0112de9 <schedule+4d/2f4> <=====

ebx; c024a000 <init_task_union+0/2000>
ecx; c3446000 <_end+31b73ac/6f9f3ac>
edi; c27fda00 <_end+256edac/6f9f3ac>
ebp; c024be18 <init_task_union+1e18/2000>
esp; c024bdf4 <init_task_union+1df4/2000>

Trace; c0164127 <_devfs_walk_path+5f/d4>
Trace; c0113d15 <set_running_and_schedule+1d/24>
Trace; c013272f <invalidate_inode_buffers+1b/88>
Trace; c0142647 <clear_inode+b/b0>
Trace; c0143046 <iput+d6/1ac>
Trace; c0165bad <devfs_d_iput+59/68>
Trace; c0140cc3 <dput+c3/124>
Trace; c01643b0 <free_dentry+3c/44>
Trace; c01649ba <_devfs_unregister+36/74>
Trace; c0164a0f <devfs_unregister+17/24>
Trace; c016e1ef <tty_unregister_devfs+43/50>
Trace; c0115aa3 <release_console_sem+73/78>
Trace; c01159e7 <printk+ff/114>
Trace; c0181136 <unregister_serial+5e/7c>
Trace; c725cd4a <[serial_cs]serial_release+2e/80>
Trace; c725cd1c <[serial_cs]serial_release+0/80>
Trace; c011c94f <timer_bh+26b/384>
Trace; c0119482 <bh_action+1a/40>
Trace; c01193b6 <tasklet_hi_action+4a/70>
Trace; c01191ca <do_softirq+5a/ac>
Trace; c0109b9d <do_IRQ+a1/b4>
Trace; c0106d10 <default_idle+0/28>
Trace; c010bd28 <call_do_IRQ+5/d>
Trace; c0106d10 <default_idle+0/28>
Trace; c0106d33 <default_idle+23/28>
Trace; c0106d97 <cpu_idle+3f/54>
Trace; c0105000 <_stext+0/0>
Trace; c0105027 <rest_init+27/28>

Code; c0112de9 <schedule+4d/2f4>
00000000 <_EIP>:
Code; c0112de9 <schedule+4d/2f4> <=====
0: 0f 0b ud2a <=====
Code; c0112deb <schedule+4f/2f4>
2: 41 inc %ecx
Code; c0112dec <schedule+50/2f4>
3: 02 d6 add %dh,%dl
Code; c0112dee <schedule+52/2f4>
5: d4 1e aam $0x1e
Code; c0112df0 <schedule+54/2f4>
7: c0 83 c4 04 8b 4d f4 rolb $0xf4,0x4d8b04c4(%ebx)
Code; c0112df7 <schedule+5b/2f4>
e: c1 e1 05 shl $0x5,%ecx
Code; c0112dfa <schedule+5e/2f4>
11: 81 c1 40 00 00 00 add $0x40,%ecx

<0>Kernel panic: Aiee, killing interrupt handler!

#4 lore raw

Re: __get_free_pages

Quoted 1 line · Imran Badr

Does __get_free_pages(..) return physically contiguous pages?

Yes.

Robert Love

#5 lore raw

Re: __get_free_pages

Quoted 5 lines · Robert Love
Quoted 1 line · Imran Badr

Does __get_free_pages(..) return physically contiguous pages?

Yes.

But only if they're available. Linux doesn't currently have any mechanisms for smart defragmentation of physical memory and even if we had them they couldn't be fully reliable.

So be careful what you ask for, if you ask for too large a chunk of memory you might end up not getting any at all.

regards,

Rik

Signature · 3 lines
Bravely reimplemented by the knights who say "NIH".

http://www.surriel.com/		http://distro.conectiva.com/