Skip to contentSkip to conversation

Poweroff error from 2.4.20-pre5-ac1 w/ Asus A7M266-D motherboard AND question

DISCUSSION Shawn Starr 2 participants 4 messages Sep 2, 2002

lore
Share & tools
lore
#0 lore raw

First the question:

Why does Linux detect my AMD chipset as ONLY the MP and not the MPX? I thought the A7M266-D had the MPX? The manual says it does

Secondly the error:

On poweroff: I see:

hdc: failed to unregister!

I have mapped hdc to sdc0 (via SCSI Emulation)

hdc: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive

SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: YAMAHA Model: CRW2100E Rev: 1.0N
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

Just to also mention I have enabled the experimental AMD Power Management:

md76x_pm: Version 20020730
amd76x_pm: Initializing northbridge Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller
amd76x_pm: Initializing southbridge Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI

#1 lore raw
Quoted 3 lines · Shawn Starr

First the question:

Why does Linux detect my AMD chipset as ONLY the MP and not the MPX? I thought the A7M266-D had the MPX?

The northbridge is the same so that shouldnt matter. The hdc is probably a bug in the new ide code. It may be fixed by pre3 (coming up soon)

#2 lore raw

I'll grab that and other things. Do you need another A7M266-D test monkey?

Shawn.

Quoted 8 lines · Alan Cox
Quoted 4 lines · Shawn Starr

First the question:

Why does Linux detect my AMD chipset as ONLY the MP and not the MPX? I thought the A7M266-D had the MPX?

The northbridge is the same so that shouldnt matter. The hdc is probably a bug in the new ide code. It may be fixed by pre3 (coming up soon)

#3 lore raw
Quoted 1 line · Shawn Starr

I'll grab that and other things. Do you need another A7M266-D test monkey?

I've got one