2.5.33: modular ide breaks lilo ...
Hi,
I've tried building the ide driver modular and insmod it using an initrd. The kernel boots just fine, but lilo complains:
bogomips root ~# lilo
Device 0x0300: Invalid partition table, 2nd entry
3D address: 1/0/262 (264096)
Linear address: 1/10/4175 (4209030)
I've also noticed that the fdisk output looks different depending on modular vs. static ide, I suspect this is related. With a modular IDE driver it looks like this:
bogomips root ~# fdisk -l /dev/hda
Disk /dev/hda: 16 heads, 63 sectors, 79780 cylinders Units = cylinders of 1008 * 512 bytes
Device Boot Start End Blocks Id System/dev/hda1 1 4176 2104483+ b Win95 FAT32
Partition 1 does not end on cylinder boundary:
phys=(261, 254, 63) should be (261, 15, 63)
/dev/hda2 * 4176 68659 32499495 5 Extended
Partition 2 does not end on cylinder boundary:
phys=(1023, 254, 63) should be (1023, 15, 63)
/dev/hda4 68659 79768 5598652+ a5 FreeBSD
Partition 4 does not end on cylinder boundary:
phys=(1023, 254, 63) should be (1023, 15, 63)
/dev/hda5 4176 6264 1052226 82 Linux swap
/dev/hda6 6264 18759 6297448+ 83 Linux
/dev/hda7 18759 68659 25149726 83 LinuxWith ide built-in statically fdisk prints this:
bogomips root ~# fdisk -l
Disk /dev/hda: 255 heads, 63 sectors, 5005 cylinders Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System /dev/hda1 1 262 2104483+ b Win95 FAT32 /dev/hda2 * 263 4308 32499495 5 Extended /dev/hda4 4309 5005 5598652+ a5 FreeBSD /dev/hda5 263 393 1052226 82 Linux swap /dev/hda6 394 1177 6297448+ 83 Linux /dev/hda7 1178 4308 25149726 83 Linux
Any idea?
Gerd
Quoted 7 lines · Gerd Knorr
I've tried building the ide driver modular and insmod it using an initrd. The kernel boots just fine, but lilo complains:
bogomips root ~# lilo
Device0x0300: Invalid partition table, 2nd entry
3D address: 1/0/262 (264096)
Linear address: 1/10/4175 (4209030)
What LILO version?
For many versions it will suffice to give LILO the linear or lba32 option.
Quoted 9 lines
I've also noticed that the fdisk output looks different depending on modular vs. static ide, I suspect this is related. With a modular IDE driver it looks like this:
bogomips root ~# fdisk -l
/dev/hdaDisk
/dev/hda: 16 heads, 63 sectors, 79780 cylinders Units = cylinders of 1008 * 512 bytes
Quoted 6 lines
With ide built-in statically fdisk prints this:
bogomips root ~# fdisk -l
Disk
/dev/hda: 255 heads, 63 sectors, 5005 cylinders Units = cylinders of 16065 * 512 bytes
What fdisk version? Make sure you have a recent one. Clearly, the rest of the fdisk output is a consequence of the different geometries. The kernel boot messages will probably tell what happened. I must still read this part of the kernel source again to see what the current status is.
Andries
Quoted 11 lines · Andries Brouwer
Quoted 7 lines · Gerd Knorr
I've tried building the ide driver modular and insmod it using an initrd. The kernel boots just fine, but lilo complains:
bogomips root ~# lilo
Device0x0300: Invalid partition table, 2nd entry
3D address: 1/0/262 (264096)
Linear address: 1/10/4175 (4209030)What LILO version?
22.1
Quoted 1 line
For many versions it will suffice to give LILO the linear or lba32 option.
There already is a lba32 option in lilo.conf ...
Quoted 7 lines
Quoted 5 lines
Disk
/dev/hda: 16 heads, 63 sectors, 79780 cylinders Units = cylinders of 1008 * 512 bytesDisk
/dev/hda: 255 heads, 63 sectors, 5005 cylinders Units = cylinders of 16065 * 512 bytesWhat fdisk version? Make sure you have a recent one.
2.11n
Quoted 2 lines
Clearly, the rest of the fdisk output is a consequence of the different geometries. The kernel boot messages will probably tell what happened.
modular:
[ ... ]
hda: IBM-DTLA-305040, ATA DISK drive
[ ... ]
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=79780/16/63, UDMA(33)
hda: hda1 hda2 < hda5 hda6 hda7 > hda4
hda4: <bsd: hda8 hda9 hda10 hda11 >
[ ... ]
builtin:
[ ... ]
hda: IBM-DTLA-305040, ATA DISK drive
[ ... ]
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=5005/255/63, UDMA(33)
hda: hda1 hda2 < hda5 hda6 hda7 > hda4
hda4: <bsd: hda8 hda9 hda10 hda11 >
[ ... ]
The boot messages and the CHS geometry displayed by fdisk match ...
Gerd
Signature · 3 lines
You can't please everybody. And usually if you _try_ to please everybody, the end result is one big mess. -- Linus Torvalds, 2002-04-20