Skip to contentSkip to conversation

IDE-DVD problems [excuse former idiotic topic]

DISCUSSION Benjamin LaHaise 1 participant 1 message Sep 4, 2002 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Have you tried commenting out the hdparm commands in the initscripts and booted with a kernel that enables DMA (instead of using hdparm -d1)?

-ben

Quoted 29 lines · Joseph N. Hall

Yes, DMA makes the drive completely non functional and eventually hangs the machine after some amount of attempted use. This is regardless of when DMA is enabled, whether via the standard RedHat "harddiskn" mechanism or manually with hdparm.

-joseph

Quoted 21 lines · Matthew Dharm

Have you tried enabling DMA on the drive?

Matt

Quoted 15 lines · Joseph N. Hall

Dear Kernel Folks,

I am trying to determine the cause of the poor performance of a an IDE DVD device on my new machine. I have an IDE Panasonic DF-210-type DVD-RAM/R/ROM in a new machine with Soyo KT333 motherboard. It transfers data slowly (below DVD speed), consumes large amounts of system time, and slows down the user interface and even system clock (which can run as slow as 1/4 speed while the drive is going).

The interrupt ERR count below seems to be mostly related to use of the DVD drive.

Maybe it's something simple. If not, I'll be glad to do further work to help diagnose the problem.

Signature · 1 line
"You will be reincarnated as a toad; and you will be much happier."