IDE-DVD problems [excuse former idiotic topic]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 2 lines · Joseph N. Hall
Right, but it will work with or without DMA, for some definition of "work." Or it should work, right?
Define "work". hdparm -d1 doesn't just work, it requires making sure that the drive and interface are properly programmed to the correct transfer rates first (read as: hdparm -d1 can be Bad). Using the kernel defaults is much better as the probe code will make sure that everything is setup correctly. Andre can provide more details and help fix things if it doesn't actually work for your drive.
Quoted 7 lines
Do you know anyone who has gotten this particular drive to work? Or for that matter if there are any troubles with the KT333 chipset? I wouldn't be surprised if there are some interrupt "issues" with KT333 because my plain old IDE performance was not good under the stock 2.4.18-3 kernel ... it would do some of the same things (lots of system time, temporary "pauses", etc.).
You might need to upgrade from the -3 kernel (several errata have been released) as there were a few known problems with some network drivers, as well as NFS and ext3. Different drives also have varing amounts of cache, and it might be this that you're noticing.
Quoted 4 lines
I am also having problems with the C-Media onboard audio + ALSA (0.9 rc3) ... it hangs the system (totally) after playing for a few seconds. So that is another strike against this particular h/w configuration.
Again, try a newer kernel. I'm using a C-Media at home and it works pretty well for ogg/DVD playback.
-ben
Signature · 1 line
"You will be reincarnated as a toad; and you will be much happier."