side-by-side Re: BYTE Unix Benchmarks Version 3.6
From: [email protected]
Quoted 6 lines
I usually run byte bench regularly with every new kernel, so I see some strange results here.
From your numbers, I would say you are using a PIII 600/900 Mhz (more or less). It is not an AMD AThlon or a PIV, since float and double are too slow, not it is a K6 because they are too fast.
Yes, I ran the test on a HP Omnibook 600 (PIII@900)
[...]
Quoted 8 lines
seeing this I think you had something running in background using your CPU while you where running int tests. if you loock at bm/results/log (log.accum if you did some other run recently)
should find lines like:Arithmetic Test (type = int)|10.0|lps|227163.1|227158.7|6
that is a little more interesting if you are under load.
No other load, just top and a less of a few files.
[...]
Quoted 6 lines
Quoted 2 lines
Quoted 1 line
Process Creation Test 9078.6 lps 5422.1 lps
Execl Throughput Test 998.0 lps 771.6 lps
this is interesting, but seeing previous results about int and short, I am curious about your real load. I am quite curious if with 2.5 you are using kernel preemption.
No load, but preemption.
Quoted 8 lines
Quoted 6 lines
File Read (10 seconds) 1571652.0 KBps 1553289.0 KBps
File Write (10 seconds) 109237.0 KBps 132002.0 KBpsQuoted 1 line
File Copy (10 seconds) 24329.0 KBps 17994.0 KBps
File Read (30 seconds) 1562505.0 KBps 1540682.0 KBps
File Write (30 seconds) 113152.0 KBps 137781.0 KBps
File Copy (30 seconds) 14334.0 KBps 11460.0 KBpsI saw the save with IDE disks... again, are you using kernel preemption?
ang again, yes ;-)
Quoted 7 lines
Quoted 5 lines
C Compiler Test 470.9 lpm 450.9 lpm Shell scripts (1 concurrent) 980.4 lpm 876.7 lpm Shell scripts (2 concurrent) 544.1 lpm 480.3 lpm Shell scripts (4 concurrent) 287.0 lpm 251.0 lpm Shell scripts (8 concurrent) 147.0 lpm 126.0 lpmIn my tests generally shell scripts are faster with 2.5 kernel.
In any case I'll run again the test with the 4.1 version of Unix Bench.
I'll post the result using as "baseline" the results of the 2.4.19 again 2.5.33 and hopefully 2.4.20-pre5aa1.
Ciao,
Paolo
Signature · 4 lines
Get your free email from www.linuxmail.org Powered by Outblaze
Hi!
Quoted 7 lines
Quoted 6 lines
I usually run byte bench regularly with every new kernel, so I see some strange results here.
From your numbers, I would say you are using a PIII 600/900 Mhz (more or less). It is not an AMD AThlon or a PIV, since float and double are too slow, not it is a K6 because they are too fast.
Yes, I ran the test on a HP Omnibook 600 (PIII@900)
APM or ACPI? How did you guarantee not going powersave?
Pavel
Signature · 2 lines
Philips Velo 1: 1"x4"x8", 300gram, 60, 12MB, 40bogomips, linux, mutt, details at http://atrey.karlin.mff.cuni.cz/~pavel/velo/index.html.
Quoted 11 lines · Pavel Machek
Date: Fri, 6 Sep 2002 10:28:50 +0000
From: Pavel Machek <[email protected]>
To: Paolo Ciarrocchi <[email protected]>
Cc: [email protected], [email protected], [email protected]
Subject: Re: side-by-side Re: BYTE Unix Benchmarks Version 3.6Hi!
Quoted 3 lines
Quoted 3 lines
I usually run byte bench regularly with every new kernel, so I see some strange results here.
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
From your numbers, I would say you are using a PIII 600/900 Mhz (more or less). It is not an AMD AThlon or a PIV, since float and double are too slow, not it is a K6 because they are too fast.
Yes, I ran the test on a HP Omnibook 600 (PIII@900)
APM or ACPI? How did you guarantee not going powersave?
I suppose Paolo disabled power saving both from bios and from kernel, of course. If not, then the differences I noticed could be explained easilly, Thanx
Luigi