Skip to contentSkip to conversation

DMA borked in 2.4.20-pre5-ac1

DISCUSSION Joseph N. Hall 2 participants 2 messages Sep 6, 2002

lore
Share & tools
lore
#0 lore raw

Okay, I got tired of living DMA hell with the Soyo Dragon Ultra Platinum m/b (KT333a), and bought an ALi-based m/b instead, an IWill XP333-R. But ... to my dismay I had no DMA at all when booting under 2.4.20-pre5-ac1, which at least gave me hard disk DMA on the Soyo. Also under 2.4.20-pre5-ac1 hdparm -d1 /dev/hda refused to work, and hdparm -X66 /dev/hda segfaulted:

Sep  4 19:38:14 dhcppc5 kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
Sep  4 19:38:14 dhcppc5 kernel:  printing eip:
Sep  4 19:38:14 dhcppc5 kernel: 00000000
Sep  4 19:38:14 dhcppc5 kernel: *pde = 00000000
Sep  4 19:38:14 dhcppc5 kernel: Oops: 0000
Sep  4 19:38:14 dhcppc5 kernel: CPU:    0
Sep  4 19:38:14 dhcppc5 kernel: EIP:    0010:[<00000000>]    Not tainted
Sep  4 19:38:14 dhcppc5 kernel: EFLAGS: 00010286
Sep  4 19:38:14 dhcppc5 kernel: eax: 00000042   ebx: 000000fa   ecx: 80002054   edx: 00000cfe
Sep  4 19:38:14 dhcppc5 kernel: esi: c02ef9f0   edi: 00000056   ebp: c02ef940   esp: e02abdb8
Sep  4 19:38:14 dhcppc5 kernel: ds: 0018   es: 0018   ss: 0018
Sep  4 19:38:14 dhcppc5 kernel: Process hdparm (pid: 2077, stackpage=e02ab000)
Sep  4 19:38:14 dhcppc5 kernel: Stack: c0190cd9 c02ef9f0 000000fa 00000001 42000056 000000fa 00000000 00000056
Sep  4 19:38:14 dhcppc5 kernel:        c253ac00 c01a210e c02ef9f0 00000042 e02abdf3 00000001 fa42be1c e02abe90
Sep  4 19:38:14 dhcppc5 kernel:        e02abe90 c02ef9f0 e02abe1c c01939f7 c02ef9f0 00000042 00000004 42557540
Sep  4 19:38:14 dhcppc5 kernel: Call Trace:    [<c0190cd9>] [<c01a210e>] [<c01939f7>] [<c01328c9>] [<c017088c>]
Sep  4 19:38:14 dhcppc5 kernel:   [<c016d6d8>] [<c016cfec>] [<c0198122>] [<c016f18c>] [<c013f6a3>] [<c01462e6>]
Sep  4 19:38:14 dhcppc5 kernel:   [<c01087a3>]
Sep  4 19:38:14 dhcppc5 kernel:
Sep  4 19:38:14 dhcppc5 kernel: Code:  Bad EIP value.

Here are some syslog messages. I'm not in the mood to go retrieve the 2.4.20-pre5-ac1 dmesg, but will do it if asked.

Under 2.4.20-pre5-ac1:

Sep  5 18:16:33 dhcppc5 kernel: Linux version 2.4.20-pre5-ac1 (root@dhcppc4) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #4 Sun Sep 1 22:06:11 PDT 2002
Sep  5 18:16:41 dhcppc5 kernel: ALI15X3: IDE controller at PCI slot 00:04.0
Sep  5 18:16:41 dhcppc5 kernel: PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=biosirq.
Sep  5 18:16:41 dhcppc5 kernel: ALI15X3: chipset revision 196
Sep  5 18:16:41 dhcppc5 kernel: ALI15X3: not 100%% native mode: will probe irqs later
Sep  5 18:16:41 dhcppc5 kernel: ALI15X3: simplex device with no drives: DMA disabled
Sep  5 18:16:41 dhcppc5 kernel: ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
Sep  5 18:16:41 dhcppc5 kernel: ALI15X3: simplex device with no drives: DMA disabled
Sep  5 18:16:41 dhcppc5 kernel: ide1: ALI15X3 Bus-Master DMA disabled (BIOS)

Under 2.4.19:

Sep  5 18:20:03 dhcppc5 kernel: Linux version 2.4.19 (root@dhcppc4) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #6 Sun Sep 1 22:07:45 PDT 2002
Sep  5 18:20:04 dhcppc5 kernel: ALI15X3: IDE controller on PCI bus 00 dev 20
Sep  5 18:20:04 dhcppc5 kernel: PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=biosirq.
Sep  5 18:20:04 dhcppc5 kernel: ALI15X3: chipset revision 196
Sep  5 18:20:04 dhcppc5 kernel: ALI15X3: not 100%% native mode: will probe irqs later
Sep  5 18:20:04 dhcppc5 kernel:     ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
Sep  5 18:20:04 dhcppc5 kernel:     ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA

00:04.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Laboratories Inc. [ALi] M5229 IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at a000 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: Acer Laboratories Inc. [ALi] ALI M1533 Aladdin IV ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

#1 lore raw
Quoted 7 lines · Joseph N.Hall

Okay, I got tired of living DMA hell with the Soyo Dragon Ultra Platinum m/b (KT333a), and bought an ALi-based m/b instead, an IWill XP333-R. But ... to my dismay I had no DMA at all when booting under 2.4.20-pre5-ac1, which at least gave me hard disk DMA on the Soyo. Also under 2.4.20-pre5-ac1 hdparm -d1 /dev/hda refused to work, and hdparm -X66 /dev/hda segfaulted:

All known problems. Your ALi should work just fine with a 2.4.19-ac stable kernel release. 2.4.20pre-ac has lots of new and experimental IDE work going on in it.