Skip to contentSkip to conversation

Making APM more accurate

DISCUSSION Theo. Sean Schulze 3 participants 5 messages Sep 6, 2002 – Sep 8, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

Is there a way to make apm's or apmd's estimates of the time left on a battery charge more accurate?

I just booted my laptop (a Sony VAIO PCG-C1XS with the stock hardware) after several days of not having used it. APM reported as I logged in that I had 39% battery charge left and 136 minutes of use remaining. I wish that were true, but based on experience, with this older battery I can expect about 20 to 25 minutes charge. Since I am using a wireless card, the usable time is actually significantly lower, and I acknowledge and accept that. That is not the issue.

The problem is, that as the charge decreases, the time remaining on the charge becomes more and more unrealistic. For example, I know have 21% charge remaining and that equates out to 89 minutes, according to apm. I have gone from 136 minutes remaining to 89 minutes remaining in the space of about 7 minutes. Is there any way to get apm to accurately calculate the rate of discharge? To what extent does this depend on my laptop's BIOS?

Cheers,
Sean

Signature · 7 lines
Theo. Sean Schulze
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw
Quoted 13 lines · Theo. Sean Schulze

Hello,

Is there a way to make apm's or apmd's estimates of the time left on a battery charge more accurate?

I just booted my laptop (a Sony VAIO PCG-C1XS with the stock hardware) after several days of not having used it. APM reported as I logged in that I had 39% battery charge left and 136 minutes of use remaining. I wish that were true, but based on experience, with this older battery I can expect about 20 to 25 minutes charge. Since I am using a wireless card, the usable time is actually significantly lower, and I acknowledge and accept that. That is not the issue.

Quoted 7 lines

The problem is, that as the charge decreases, the time remaining on the charge becomes more and more unrealistic. For example, I know have 21% charge remaining and that equates out to 89 minutes, according to apm. I have gone from 136 minutes remaining to 89 minutes remaining in the space of about 7 minutes. Is there any way to get apm to accurately calculate the rate of discharge? To what extent does this depend on my laptop's BIOS?

On my laptop a Compaq Armada i get relatively accurate readings, altho' to be honest i dont take a lot of notice of its messages.

Now APM(d) works with the BIOS, so could it be that your BIOS is giving unacurate data to apm.
IMHO it could happen when a battery is nearing the end of its life, internal resistance lowers causing all sorts of strange effects on older batterys.

Now i am not saying that is the problem, but i wonder if you could get hold of another battery and then see if apm gives different details..

Thats just my thoughts and my not reflect your actual problem.

Quoted 3 lines

Cheers,
Sean

Signature · 9 lines
Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw

The battery in this laptop is over two years old, so I can't rule out the possiblity that this is battery induced. I am just trying to avoid laying out the money (about $125) it will cost to find out.

What I was thinking, though, was that apm(d) would track this internally by measuring the state of the battery and then using changes in battery charge between measurements as a way to forecast remaining time on the charge measured. I don't know anything about the relationship between the BIOS, the battery and apm(d) though, so I can't tell which plays what role. Might be time to dig out the apm(d) source and see what information is included with it. I didn't see this issue expressly addressed in the man pages (or I missed it).

Thanks,
Sean

On Sat, Sep 07, 2002 at 01:13:13PM +0000, pa3gcu hunted and pecked out:

Quoted 45 lines · Theo. Sean Schulze
Quoted 13 lines

Hello,

Is there a way to make apm's or apmd's estimates of the time left on a battery charge more accurate?

I just booted my laptop (a Sony VAIO PCG-C1XS with the stock hardware) after several days of not having used it. APM reported as I logged in that I had 39% battery charge left and 136 minutes of use remaining. I wish that were true, but based on experience, with this older battery I can expect about 20 to 25 minutes charge. Since I am using a wireless card, the usable time is actually significantly lower, and I acknowledge and accept that. That is not the issue.

Quoted 7 lines

The problem is, that as the charge decreases, the time remaining on the charge becomes more and more unrealistic. For example, I know have 21% charge remaining and that equates out to 89 minutes, according to apm. I have gone from 136 minutes remaining to 89 minutes remaining in the space of about 7 minutes. Is there any way to get apm to accurately calculate the rate of discharge? To what extent does this depend on my laptop's BIOS?

On my laptop a Compaq Armada i get relatively accurate readings, altho' to be honest i dont take a lot of notice of its messages.

Now APM(d) works with the BIOS, so could it be that your BIOS is giving unacurate data to apm.
IMHO it could happen when a battery is nearing the end of its life, internal resistance lowers causing all sorts of strange effects on older batterys.

Now i am not saying that is the problem, but i wonder if you could get hold of another battery and then see if apm gives different details..

Thats just my thoughts and my not reflect your actual problem.

Quoted 3 lines

Cheers,
Sean

Signature · 3 lines
Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/
Signature · 7 lines
Theo. Sean Schulze
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#3 lore raw
Quoted 4 lines · Theo. Sean Schulze

The battery in this laptop is over two years old, so I can't rule out the possiblity that this is battery induced. I am just trying to avoid laying out the money (about $125) it will cost to find out.

Quoted 8 lines

What I was thinking, though, was that apm(d) would track this internally by measuring the state of the battery and then using changes in battery charge between measurements as a way to forecast remaining time on the charge measured. I don't know anything about the relationship between the BIOS, the battery and apm(d) though, so I can't tell which plays what role. Might be time to dig out the apm(d) source and see what information is included with it. I didn't see this issue expressly addressed in the an pages (or I missed it).

If what you think is the way apm does it, then that would give erratic measurments as an old and decreaped battery will "seem" to charge up very quickly because of its internal resistance varying too quickly.

Quoted 4 lines

Thanks,
Sean

Signature · 9 lines
Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#4 lore raw

How to remotely access Samba server over land-line phone with win9x client

I am looking for a simple poor man's solution and not an elaborate big business set-up....

This is the situation:
We have a Samba server (Slackware with kernel 2.2.17) which shares files including MS Office, graphics, mp3s, etc over several win9x clients in the office. This has been running smoothly for a few years now.

Now there are instances where I would like to access these files from an outside location -- say a branch office or from home -- with most likely a win9x box with a modem over a land-line phone line. The server in the office can have a modem attached directly to it, or be attached to a "gateway/router" box which in turn has a modem attached to it.

I have read the howtos and searched the net but have not been able to find anything useful. Unless I missed something, the Dial-in howto is about dialling in to share internet connection at the head office, while the VPN howto is somewhat what I want but has to do with making connection through the internet.

Any suggestions, please?

TIA
Shaggy
Bangkok, Thailand

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs