Configuring kernel
I have Linux RedHat 7.1 installed on my machine which has a kernel version 2.4.2. I have to run a software called iSCSI for which I need a lower kernel version 2.4.16.
I downloaded the sofware and opened it in the /usr/src directory. I did the following
1. unzipped the tar file
2. mv linux linux-2.4.16
3 ln -s linux-2.4.16 linux
4. changed to linux directory and issued the command make mproper.
Then when I issued the command make xconfig I was getting errors. I got similar errors when I tried to use the following commands make menuconfig, make config.
When I used the command uname -i I still was getting the kernel version as 2.4.2.
I do not know why this error is coming.
Kindly please help.
Regards,
Srinivas Chavva
__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com
Quoted 11 lines
I downloaded the sofware and opened it in the
/usr/srcdirectory. I did the following
1. unzipped the tar file
2. mv linux linux-2.4.16
3 ln -s linux-2.4.16 linux
4. changed to linux directory and issued the command make mproper.
Then when I issued the command make xconfig I was getting errors. I got similar errors when I tried to use the following commands make menuconfig, make config.
What errors did you get? We need to know what the errors are to help you.
Quoted 3 lines
When I used the command uname -i I still was getting the kernel version as 2.4.2.
I do not know why this error is coming.
This is not an error. If you did not install a new kernel and reboot your computer with the new kernel, uname will still have the same kernel version. Once you have properly configured, compiled and installed the kernel and its modules, you reboot the computer to apply the new kernel. Then uname will give you the new version.
Signature · 8 lines
Adam Jaskiewicz [email protected] http://middlearth.d2g.com:31415 GPG Public Key at http://middlearth.d2g.com:31415/public_key.asc -- Ehrman's Commentary: (1) Things will get worse before they get better. (2) Who said things would get better?
I seem to remember either the early RH 7.x series or 6.x series did not necessarily install ncurses by default, thus make menuconfig did not run. If you did a very slim install, you may not have the right libraries to do what you need. Do an 'rpm -q ncurses ncurses-devel' and see what you get. If either is not found, make menuconfig will not run.
Quoted 28 lines · Adam Jaskiewicz
Quoted 13 lines
I downloaded the sofware and opened it in the
/usr/srcdirectory. I did the following
1. unzipped the tar file
2. mv linux linux-2.4.16
3 ln -s linux-2.4.16 linux
4. changed to linux directory and issued the command make mproper.
Then when I issued the command make xconfig I was getting errors. I got similar errors when I tried to use the following commands make menuconfig, make config.What errors did you get? We need to know what the errors are to help you.
Quoted 5 lines
When I used the command uname -i I still was getting the kernel version as 2.4.2.
I do not know why this error is coming.This is not an error. If you did not install a new kernel and reboot your computer with the new kernel, uname will still have the same kernel version. Once you have properly configured, compiled and installed the kernel and its modules, you reboot the computer to apply the new kernel. Then uname will give you the new version.
When I tried to execute the command "make xconfig" I got the following output
rm -f include/asm
(cd include; ln -sf asm -i386 asm)
make -C scripts knconfig.tk
make: *** scripts: No such file or directory. Stop.
make: *** [xconfig] Error 2
When I executed the command 'rpm -q ncurses ncurses-devel' I got the following output
ncurses-5.2-8
ncurses-devel-5.2-8
Could you please help me to fix the error. Thanking You.
Regards,
Srinivas Chavva
Quoted 1 line · David T Hollis
Quoted 1 line
I seem to remember either the early RH 7.x series or
6.x series did not
Quoted 1 line
Quoted 1 line
necessarily install ncurses by default, thus make
menuconfig did not
Quoted 1 line
Quoted 1 line
run. If you did a very slim install, you may not
have the right
Quoted 1 line
Quoted 1 line
libraries to do what you need. Do an 'rpm -q
ncurses ncurses-devel'
Quoted 2 lines
Quoted 2 lines
and
see what you get. If either is not found, make
menuconfig will not
Quoted 1 line
Quoted 1 line
run.
Quoted 1 line · Adam Jaskiewicz
Quoted 1 line
I downloaded the sofware and opened it in the
/usr/src
Quoted 13 lines
Quoted 12 lines
directory. I did the following
1. unzipped the tar file
2. mv linux linux-2.4.16
3 ln -s linux-2.4.16 linux
4. changed to linux directory and issued the command make mproper.
Then when I issued the command make xconfig I was getting errors. I got similar errors when I tried to use the following commands make menuconfig, make config.
Quoted 1 line
What errors did you get? We need to know what the
errors are to help
you.
Quoted 10 lines
Quoted 8 lines
When I used the command uname -i I still was getting the kernel version as 2.4.2.
I do not know why this error is coming.This is not an error. If you did not install a new
kernel and reboot
your
Quoted 1 line
computer with the new kernel, uname will still have
the same kernel
version.
Quoted 1 line
Once you have properly configured, compiled and
installed the kernel
and its
Quoted 1 line
modules, you reboot the computer to apply the new
kernel. Then uname
will
Quoted 4 lines
give you the new version.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com
Quoted 6 lines · Srinivas Chavva
When I tried to execute the command "make xconfig" I got the following output
rm -f
include/asm
(cd include; ln -sf asm -i386 asm)
make -C scripts knconfig.tk
There is no file named "knconfig.tk" - check your top-level Makefile. The correct name is "kconfig.tk".
Sam
I am extremely sorry I made a typing error. When I executed the command make xconfig I got the following output
rm -f include/asm
(cd include; ln -sf asm -i386 asm)
make -C scripts kconfig.tk
make: *** scripts: No such file or directory. Stop.
make: *** [xconfig] Error 2
Please help me to fix the error.
Thanking You.
Regards,
Srinivas Chavva
Quoted 6 lines · --- Sam Ravnborg
Quoted 1 line · Srinivas Chavva
When I tried to execute the command "make xconfig"
I
Quoted 2 lines
got the following output
Quoted 8 lines
Quoted 3 lines
rm -f
include/asm
(cd include; ln -sf asm -i386 asm)
make -C scripts knconfig.tkThere is no file named "knconfig.tk" - check your
top-levelMakefile.
The correct name is "kconfig.tk".Sam
__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com
Quoted 8 lines · Srinivas Chavva
When I tried to execute the command "make xconfig" I got the following output
rm -f
include/asm
(cd include; ln -sf asm -i386 asm)
make -C scripts knconfig.tk
make: *** scripts: No such file or directory. Stop.
make: *** [xconfig] Error 2
I get:
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts kconfig.tk
make[1]: Entering directory `/usr/src/linux-2.4.18/scripts' <...>
Did you unpack the kernel as root and now trying to configure the kernel as a normal user? The error is stating the equivelent that the directory `/usr/src/linux-2.4.18/scripts' is not there (make was trying to cd into it). So I assume you either deleted the directory or you don't have access to it.
-Paul