Skip to contentSkip to conversation

Lexmark Printer

DISCUSSION Peter 2 participants 3 messages Sep 20, 2002 – Sep 21, 2002

lore
Share & tools
lore

Peter

author
#0 lore raw

Hi,

Lately needle refills are available here for cartriges of ink-jet-printers at a tenth of the cost of the original replacement one.

So I decided to take out my Lexmark 1100 ink-jet-printer from the mothball box where it was put after the cartridge wich came with the printer became empty since I hate to be screwed, more than once ( I noticed it too late).

I did all the necessary steps with printconf-gui to install the Lexmark 1100 printer. Unfortunately it won't print. It either does nothing at all or the printhead rattles endlessly on its corner spot. There are no error messages. Print queue shows added printjob.
The paper feed and advance is working.

Does somebody know how to make a Lexmark printer work in RH7.2?

Thanks & regards

Signature · 9 lines
Peter



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw

When you say you did "all the necessary steps", did that include consulting the Linux Printer Compatibility Database? That database lists the Lexmark 1100 as working "partially" with Linux and provides some help about the details of making it work, including a reference to the lm1100 driver it requires. See http://www.linuxprinting.org/show_printer.cgi?recnum=59008 for the instructions.

Lexmark itself is apparently something less than helpful. See the Lexmark section of http://www.linuxprinting.org/vendors.html for details.

Good luck with this ... I think you'll need some luck.

Quoted 9 lines · Peter

Hi,

Lately needle refills are available here for cartriges of ink-jet-printers at a tenth of the cost of the original replacement one.

So I decided to take out my Lexmark 1100 ink-jet-printer from the mothball box where it was put after the cartridge wich came with the printer became empty since I hate to be screwed, more than once ( I noticed it too late).

Quoted 7 lines

I did all the necessary steps with printconf-gui to install the Lexmark 1100 printer. Unfortunately it won't print. It either does nothing at all or the printhead rattles endlessly on its corner spot. There are no error messages. Print queue shows added printjob.
The paper feed and advance is working.

Does somebody know how to make a Lexmark printer work in RH7.2?

--
-------------------------------------------"Never tell me the odds!"--------
Ray Olszewski -- Han Solo
Palo Alto, California, USA [email protected]
-------------------------------------------------------------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#2 lore raw

Thanks Ray,

No I did not consult that Database. Thanks for this good pointer. I will try my luck even so I am perfectly happy with my Epson LQ-300 which I bought after the Lexmark cartridge had emptied. On the Epson a replacement ribbon costs $2.00 and is good to print 2 Million characters. I do print a lot.

Regards

Quoted 6 lines · [email protected] said:

When you say you did "all the necessary steps", did that include consulting the Linux Printer Compatibility Database? That database lists the Lexmark 1100 as working "partially" with Linux and provides some help about the details of making it work, including a reference to the lm1100 driver it requires. See http://www.linuxprinting.org/
show_printer.cgi?recnum=59008 for the instructions.

Signature · 7 lines
Peter

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs