S/PDIF RCA IEC958 C-Media PCI CMI8738 - can't record
I have an Iwill DVD266-uRN with CMI8738 sound. I'm trying to record through the RCA S/PDIF Input port. My system is Linux 2.4.19 i386 SMP.
I tried both C-Media's driver and the driver from the stock 2.4.19 kernel. S/PDIF RCA Output works but S/PDIF RCA Input doesn't work for either. I also tried:
http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html
When i turn on Monitor then my analogue speakers output static.
I also tried Alsa 9.0rc1 CMIPCI driver. Playback works fine but recording looks like this:
joshua@remix:~$ arecord -v -D spdif -t wav -f S16_LE -r 44100 -c 2 iectest Recording WAVE 'iectest' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo Hooks PCM Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 16384 period_size : 4096 period_time : 92879 tick_time : 10000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 4096 xfer_align : 4096 start_threshold : 1 stop_threshold : 16384 silence_threshold: 0 silence_size : 0 boundary : 1073741824 Slave: Hardware PCM card 0 'C-Media PCI CMI8738-MC6' device 2 subdevice -1
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16buffer_size : 16384period_size : 4096period_time : 92879tick_time : 10000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 4096xfer_align : 4096start_threshold : 1stop_threshold : 16384silence_threshold: 0silence_size : 0
boundary : 1073741824
Max peak (8192 samples): 32767 (0x7fff) #################### 100% Max peak (8192 samples): 32767 (0x7fff) #################### 100% Max peak (8192 samples): 32767 (0x7fff) #################### 100% Max peak (8192 samples): 32767 (0x7fff) #################### 100%
...
When i disconnect the cable then i get an I/O error so it is *somewhat* connected. However, i can't get a normal recording.
The ALSA Soundcard Matrix clearly claims that "RCA IEC958 Input" is supported with the CMI8738. Is this untrue?
Signature · 8 lines
Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
Quoted 9 lines · Joshua N Pritikin
I have an Iwill DVD266-uRN with CMI8738 sound. I'm trying to record through the RCA S/PDIF Input port. My system is Linux 2.4.19 i386 SMP.
I tried both C-Media's driver and the driver from the stock 2.4.19 kernel. S/PDIF RCA Output works but S/PDIF RCA Input doesn't work for either. I also tried:
http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html
Quoted 7 lines
When i turn on Monitor then my analogue speakers output static.
I also tried Alsa 9.0rc1 CMIPCI driver. Playback works fine but recording looks like this:
joshua@remix:~$ arecord -v -D spdif -t wav -f S16_LE -r 44100 -c 2 iectest Recording WAVE 'iectest' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Oops! I installed cmipci from alsa 9.0rc3 and it works!!
Signature · 8 lines
Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
Quoted 1 line · Joshua N Pritikin
joshua@remix:~$ arecord -v -D spdif -t wav -f S16_LE -r 44100 -c 2 iectest
Works here, with 48000 Hz (-f dat).
Quoted 4 lines
Max peak (8192 samples): 32767 (
0x7fff) #################### 100% Max peak (8192 samples): 32767 (0x7fff) #################### 100% Max peak (8192 samples): 32767 (0x7fff) #################### 100% Max peak (8192 samples): 32767 (0x7fff) #################### 100%
Is this a AC3 stream or normal stereo sound? I had no luck with recording AC3 sound so far, but I get the same 100% peaks with arecord when I try.
Regards...
Michael
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf